nuttx/boards/arm/olimex-lpc2378/configs/nsh/defconfig
Alin Jerpelea af28821c77 Merged in alinjerpelea/nuttx (pull request #966)
group boards by architecture

* z80: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risc-v: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: group boards by architecture

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-06 14:37:27 +00:00

46 lines
1.2 KiB
Plaintext

#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="olimex-lpc2378"
CONFIG_ARCH_BOARD_OLIMEXLPC2378=y
CONFIG_ARCH_CHIP_LPC2378=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARM_TOOLCHAIN_CODESOURCERYL=y
CONFIG_BOARD_LOOPSPERMSEC=3270
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_LPC2378_UART0=y
CONFIG_LPC2378_UART2=y
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=4
CONFIG_PREALLOC_WDOGS=4
CONFIG_RAM_SIZE=32768
CONFIG_RAM_START=0x40000000
CONFIG_RAW_BINARY=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_START_DAY=8
CONFIG_START_MONTH=4
CONFIG_START_YEAR=2010
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=0
CONFIG_UART0_BAUD=9600
CONFIG_UART0_RXBUFSIZE=128
CONFIG_UART0_SERIAL_CONSOLE=y
CONFIG_UART0_TXBUFSIZE=128
CONFIG_UART2_BAUD=576000
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WDOG_INTRESERVE=0