nuttx/net/arp/arp.h
Xiang Xiao cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00

485 lines
16 KiB
C

/****************************************************************************
* net/arp/arp.h
*
* Copyright (C) 2014-2016, 2018-2019 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __NET_ARP_ARP_H
#define __NET_ARP_ARP_H
/* The Address Resolution Protocol ARP is used for mapping between IP
* addresses and link level addresses such as the Ethernet MAC
* addresses. ARP uses broadcast queries to ask for the link level
* address of a known IP address and the host which is configured with
* the IP address for which the query was meant, will respond with its
* link level address.
*
* Note: This ARP implementation only supports Ethernet.
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <queue.h>
#include <errno.h>
#include <netinet/in.h>
#include <nuttx/net/netdev.h>
#include <nuttx/semaphore.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_DEBUG_FEATURES
# undef CONFIG_NET_ARP_DUMP
#endif
#ifndef CONFIG_ARP_SEND_MAXTRIES
# define CONFIG_ARP_SEND_MAXTRIES 5
#endif
#ifndef CONFIG_ARP_SEND_DELAYMSEC
# define CONFIG_ARP_SEND_DELAYMSEC 20
#endif
/* ARP Definitions **********************************************************/
#define ARP_REQUEST 1
#define ARP_REPLY 2
#define ARP_HWTYPE_ETH 1
#define RASIZE 4 /* Size of ROUTER ALERT */
/* Allocate a new ARP data callback */
#define arp_callback_alloc(dev) devif_callback_alloc(dev, &(dev)->d_conncb)
#define arp_callback_free(dev,cb) devif_dev_callback_free(dev, cb)
/****************************************************************************
* Public Types
****************************************************************************/
/* ARP header -- Size 28 bytes */
struct arp_hdr_s
{
uint16_t ah_hwtype; /* 16-bit Hardware type (Ethernet=0x001) */
uint16_t ah_protocol; /* 16-bit Protocol type (IP=0x0800) */
uint8_t ah_hwlen; /* 8-bit Hardware address size (6) */
uint8_t ah_protolen; /* 8-bit Procotol address size (4) */
uint16_t ah_opcode; /* 16-bit Operation */
uint8_t ah_shwaddr[6]; /* 48-bit Sender hardware address */
uint16_t ah_sipaddr[2]; /* 32-bit Sender IP address */
uint8_t ah_dhwaddr[6]; /* 48-bit Target hardware address */
uint16_t ah_dipaddr[2]; /* 32-bit Target IP address */
};
/* IP header -- Size 20 or 24 bytes */
struct arp_iphdr_s
{
uint8_t eh_vhl; /* 8-bit Version (4) and header length (5 or 6) */
uint8_t eh_tos; /* 8-bit Type of service (e.g., 6=TCP) */
uint8_t eh_len[2]; /* 16-bit Total length */
uint8_t eh_ipid[2]; /* 16-bit Identification */
uint8_t eh_ipoffset[2]; /* 16-bit IP flags + fragment offset */
uint8_t eh_ttl; /* 8-bit Time to Live */
uint8_t eh_proto; /* 8-bit Protocol */
uint16_t eh_ipchksum; /* 16-bit Header checksum */
uint16_t eh_srcipaddr[2]; /* 32-bit Source IP address */
uint16_t eh_destipaddr[2]; /* 32-bit Destination IP address */
uint16_t eh_ipoption[2]; /* (optional) */
};
#ifdef CONFIG_NET_ARP_SEND
/* This structure holds the state of the send operation until it can be
* operated upon from the network driver poll.
*/
struct arp_send_s
{
FAR struct devif_callback_s *snd_cb; /* Reference to callback instance */
sem_t snd_sem; /* Used to wake up the waiting thread */
uint8_t snd_retries; /* Retry count */
volatile bool snd_sent; /* True: if request sent */
uint8_t snd_ifname[IFNAMSIZ]; /* Interface name */
int16_t snd_result; /* The result of the send operation */
in_addr_t snd_ipaddr; /* The IP address to be queried */
};
#endif
#ifdef CONFIG_NET_ARP_SEND
/* Used to notify a thread waiting for a particular ARP response */
struct arp_notify_s
{
FAR struct arp_notify_s *nt_flink; /* Supports singly linked list */
in_addr_t nt_ipaddr; /* Waited for IP address in the mapping */
sem_t nt_sem; /* Will wake up the waiter */
int nt_result; /* The result of the wait */
};
#endif
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef CONFIG_NET_ARP
/****************************************************************************
* Name: arp_format
*
* Description:
* Format an ARP packet.
*
* Input Parameters:
* dev - Device structure
* ipaddr - Target IP address (32-bit)
*
* Returned Value:
* None
*
****************************************************************************/
struct net_driver_s; /* Forward reference */
void arp_format(FAR struct net_driver_s *dev, in_addr_t ipaddr);
/****************************************************************************
* Name: arp_send
*
* Description:
* The arp_send() call may be to send an ARP request to resolve an IPv4
* address. This function first checks if the IPv4 address is already in
* the ARP table. If so, then it returns success immediately.
*
* If the requested IPv4 address in not in the ARP table, then this function
* will send an ARP request, delay, then check if the IP address is now in
* the ARP table. It will repeat this sequence until either (1) the IP
* address mapping is now in the ARP table, or (2) a configurable number
* of timeouts occur without receiving the ARP replay.
*
* Input Parameters:
* ipaddr The IP address to be queried.
*
* Returned Value:
* Zero (OK) is returned on success and the IP address mapping can now be
* found in the ARP table. On error a negated errno value is returned:
*
* -ETIMEDOUT: The number or retry counts has been exceed.
* -EHOSTUNREACH: Could not find a route to the host
*
* Assumptions:
* This function is called from the normal tasking context.
*
****************************************************************************/
#ifdef CONFIG_NET_ARP_SEND
int arp_send(in_addr_t ipaddr);
#else
# define arp_send(i) (0)
#endif
/****************************************************************************
* Name: arp_poll
*
* Description:
* Poll all pending transfer for ARP requests to send.
*
* Assumptions:
* This function is called from the MAC device driver indirectly through
* devif_poll() and devif_timer(). The network must be locked.
*
****************************************************************************/
#ifdef CONFIG_NET_ARP_SEND
int arp_poll(FAR struct net_driver_s *dev, devif_poll_callback_t callback);
#else
# define arp_poll(d,c) (0)
#endif
/****************************************************************************
* Name: arp_wait_setup
*
* Description:
* Called BEFORE an ARP request is sent. This function sets up the ARP
* response timeout before the ARP request is sent so that there is
* no race condition when arp_wait() is called.
*
* Assumptions:
* This function is called from ARP send and executes in the normal
* tasking environment.
*
****************************************************************************/
#ifdef CONFIG_NET_ARP_SEND
void arp_wait_setup(in_addr_t ipaddr, FAR struct arp_notify_s *notify);
#else
# define arp_wait_setup(i,n)
#endif
/****************************************************************************
* Name: arp_wait_cancel
*
* Description:
* Cancel any wait set after arp_wait_setup is called but before arm_wait()
* is called (arp_wait() will automatically cancel the wait).
*
* Assumptions:
* This function may execute in the interrupt context when called from
* arp_wait().
*
****************************************************************************/
#ifdef CONFIG_NET_ARP_SEND
int arp_wait_cancel(FAR struct arp_notify_s *notify);
#else
# define arp_wait_cancel(n) (0)
#endif
/****************************************************************************
* Name: arp_wait
*
* Description:
* Called each time that a ARP request is sent. This function will sleep
* until either: (1) the matching ARP response is received, or (2) a
* timeout occurs.
*
* Assumptions:
* This function is called from ARP send and must execute with the network
* un-locked.
*
****************************************************************************/
#ifdef CONFIG_NET_ARP_SEND
int arp_wait(FAR struct arp_notify_s *notify, unsigned int timeout);
#else
# define arp_wait(n,t) (0)
#endif
/****************************************************************************
* Name: arp_notify
*
* Description:
* Called each time that a ARP response is received in order to wake-up
* any threads that may be waiting for this particular ARP response.
*
* Assumptions:
* This function is called from the MAC device driver indirectly through
* arp_arpin() and will execute with the network locked.
*
****************************************************************************/
#ifdef CONFIG_NET_ARP_SEND
void arp_notify(in_addr_t ipaddr);
#else
# define arp_notify(i)
#endif
/****************************************************************************
* Name: arp_lookup
*
* Description:
* Find the ARP entry corresponding to this IP address in the ARP table.
*
* Input Parameters:
* ipaddr - Refers to an IP address in network order
*
* Assumptions:
* The network is locked to assure exclusive access to the ARP table.
* The return value will become unstable when the network is unlocked.
*
****************************************************************************/
FAR struct arp_entry_s *arp_lookup(in_addr_t ipaddr);
/****************************************************************************
* Name: arp_find
*
* Description:
* Find the ARP entry corresponding to this IP address which may or may
* not be in the ARP table (it may, instead, be a local network device).
*
* Input Parameters:
* ipaddr - Refers to an IP address in network order
* ethaddr - Location to return the corresponding Ethernet MAN address.
* This address may be NULL. In that case, this function may be
* used simply to determine if the Ethernet MAC address is
* available.
*
* Assumptions
* The network is locked to assure exclusive access to the ARP table.
*
****************************************************************************/
struct ether_addr; /* Forward reference */
int arp_find(in_addr_t ipaddr, FAR struct ether_addr *ethaddr);
/****************************************************************************
* Name: arp_delete
*
* Description:
* Remove an IP association from the ARP table
*
* Input Parameters:
* ipaddr - Refers to an IP address in network order
*
* Assumptions
* The network is locked to assure exclusive access to the ARP table.
*
****************************************************************************/
void arp_delete(in_addr_t ipaddr);
/****************************************************************************
* Name: arp_update
*
* Description:
* Add the IP/HW address mapping to the ARP table -OR- change the IP
* address of an existing association.
*
* Input Parameters:
* ipaddr - The IP address as an inaddr_t
* ethaddr - Refers to a HW address uint8_t[IFHWADDRLEN]
*
* Returned Value:
* Zero (OK) if the ARP table entry was successfully modified. A negated
* errno value is returned on any error.
*
* Assumptions
* The network is locked to assure exclusive access to the ARP table
*
****************************************************************************/
int arp_update(in_addr_t ipaddr, FAR uint8_t *ethaddr);
/****************************************************************************
* Name: arp_hdr_update
*
* Description:
* Add the IP/HW address mapping to the ARP table -OR- change the IP
* address of an existing association.
*
* Input Parameters:
* pipaddr - Refers to an IP address uint16_t[2] in network order
* ethaddr - Refers to a HW address uint8_t[IFHWADDRLEN]
*
* Returned Value:
* Zero (OK) if the ARP table entry was successfully modified. A negated
* errno value is returned on any error.
*
* Assumptions
* The network is locked to assure exclusive access to the ARP table
*
****************************************************************************/
void arp_hdr_update(FAR uint16_t *pipaddr, FAR uint8_t *ethaddr);
/****************************************************************************
* Name: arp_snapshot
*
* Description:
* Take a snapshot of the current state of the ARP table.
*
* Input Parameters:
* snapshot - Location to return the ARP table copy
* nentries - The size of the user provided 'dest' in entries, each of
* size sizeof(struct arp_entry_s)
*
* Returned Value:
* On success, the number of entries actually copied is returned. Unused
* entries are not returned.
*
* Assumptions
* The network is locked to assure exclusive access to the ARP table
*
****************************************************************************/
#ifdef CONFIG_NETLINK_ROUTE
unsigned int arp_snapshot(FAR struct arp_entry_s *snapshot,
unsigned int nentries);
#else
# define arp_snapshot(s,n) (0)
#endif
/****************************************************************************
* Name: arp_dump
*
* Description:
* Dump the contents of an ARP packet to the SYSLOG device
*
* Input Parameters:
* arp - A reference to the ARP header to be dumped.
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_NET_ARP_DUMP
void arp_dump(FAR struct arp_hdr_s *arp);
#else
# define arp_dump(arp)
#endif
#else /* CONFIG_NET_ARP */
/* If ARP is disabled, stub out all ARP interfaces */
# define arp_format(d,i);
# define arp_send(i) (0)
# define arp_poll(d,c) (0)
# define arp_wait_setup(i,n)
# define arp_wait_cancel(n) (0)
# define arp_wait(n,t) (0)
# define arp_notify(i)
# define arp_find(i,e) (-ENOSYS)
# define arp_delete(i)
# define arp_update(i,m);
# define arp_hdr_update(i,m);
# define arp_snapshot(s,n) (0)
# define arp_dump(arp)
#endif /* CONFIG_NET_ARP */
#endif /* __NET_ARP_ARP_H */