266 lines
12 KiB
C
266 lines
12 KiB
C
/************************************************************************************
|
|
* configs/olimex-lpc1766stk/src/lpc1766stk.h
|
|
*
|
|
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
|
|
#define _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#include <nuttx/compiler.h>
|
|
|
|
/************************************************************************************
|
|
* Definitions
|
|
************************************************************************************/
|
|
|
|
/* LPC1766-STK GPIO Pin Definitions *************************************************/
|
|
/* Board GPIO Usage:
|
|
*
|
|
* GPIO PIN SIGNAL NAME
|
|
* -------------------------------- ---- --------------
|
|
* P0[0]/RD1/TXD3/SDA1 46 RD1
|
|
* P0[1]/TD1/RXD3/SCL1 47 TD1
|
|
* P0[2]/TXD0/AD0[7] 98 TXD0
|
|
* P0[3]/RXD0/AD0[6] 99 RXD0
|
|
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
|
|
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
|
|
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1
|
|
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
|
|
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
|
|
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
|
|
* P0[10]/TXD2/SDA2/MAT3[0] 48 SDA2
|
|
* P0[11]/RXD2/SCL2/MAT3[1] 49 SCL2
|
|
* P0[15]/TXD1/SCK0/SCK 62 TXD1
|
|
* P0[16]/RXD1/SSEL0/SSEL 63 RXD1
|
|
* P0[17]/CTS1/MISO0/MISO 61 CTS1
|
|
* P0[18]/DCD1/MOSI0/MOSI 60 DCD1
|
|
* P0[19]/DSR1/SDA1 59 DSR1
|
|
* P0[20]/DTR1/SCL1 58 DTR1
|
|
* P0[21]/RI1/RD1 57 MMC PWR
|
|
* P0[22]/RTS1/TD1 56 RTS1
|
|
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
|
|
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
|
|
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
|
|
* P0[26]/AD0[3]/AOUT/RXD3 6 AOUT
|
|
* P0[27]/SDA0/USB_SDA 25 USB_SDA
|
|
* P0[28]/SCL0/USB_SCL 24 USB_SCL
|
|
* P0[29]/USB_D+ 29 USB_D+
|
|
* P0[30]/USB_D- 30 USB_D-
|
|
* P1[0]/ENET_TXD0 95 E_TXD0
|
|
* P1[1]/ENET_TXD1 94 E_TXD1
|
|
* P1[4]/ENET_TX_EN 93 E_TX_EN
|
|
* P1[8]/ENET_CRS 92 E_CRS
|
|
* P1[9]/ENET_RXD0 91 E_RXD0
|
|
* P1[10]/ENET_RXD1 90 E_RXD1
|
|
* P1[14]/ENET_RX_ER 89 E_RX_ER
|
|
* P1[15]/ENET_REF_CLK 88 E_REF_CLK
|
|
* P1[16]/ENET_MDC 87 E_MDC
|
|
* P1[17]/ENET_MDIO 86 E_MDIO
|
|
* P1[18]/USB_UP_LED/PWM1[1]/CAP1[0] 32 USB_UP_LED
|
|
* P1[19]/MC0A/#USB_PPWR/CAP1[1] 33 #USB_PPWR
|
|
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
|
|
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
|
|
* P1[22]/MC0B/USB_PWRD/MAT1[0] 36 USBH_PWRD
|
|
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
|
|
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
|
|
* P1[25]/MC1A/MAT1[1] 39 LED1
|
|
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
|
|
* P1[27]/CLKOUT/#USB_OVRCR/CAP0[1] 43 #USB_OVRCR
|
|
* P1[28]/MC2A/PCAP1[0]/MAT0[0] 44 P1.28
|
|
* P1[29]/MC2B/PCAP1[1]/MAT0[1] 45 P1.29
|
|
* P1[30]/VBUS/AD0[4] 21 VBUS
|
|
* P1[31]/SCK1/AD0[5] 20 AIN5
|
|
* P2[0]/PWM1[1]/TXD1 75 UP
|
|
* P2[1]/PWM1[2]/RXD1 74 DOWN
|
|
* P2[2]/PWM1[3]/CTS1/TRACEDATA[3] 73 TRACE_D3
|
|
* P2[3]/PWM1[4]/DCD1/TRACEDATA[2] 70 TRACE_D2
|
|
* P2[4]/PWM1[5]/DSR1/TRACEDATA[1] 69 TRACE_D1
|
|
* P2[5]/PWM1[6]/DTR1/TRACEDATA[0] 68 TRACE_D0
|
|
* P2[6]/PCAP1[0]/RI1/TRACECLK 67 TRACE_CLK
|
|
* P2[7]/RD2/RTS1 66 LEFT
|
|
* P2[8]/TD2/TXD2 65 RIGHT
|
|
* P2[9]/USB_CONNECT/RXD2 64 USBD_CONNECT
|
|
* P2[10]/#EINT0/NMI 53 ISP_E4
|
|
* P2[11]/#EINT1/I2STX_CLK 52 #EINT1
|
|
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
|
|
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
|
|
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
|
|
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL
|
|
*/
|
|
|
|
/* LEDs GPIO PIN SIGNAL NAME
|
|
* -------------------------------- ---- --------------
|
|
* P1[25]/MC1A/MAT1[1] 39 LED1
|
|
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
|
|
*
|
|
* LEDs are connected to +3.3V through a diode on one side and must be pulled
|
|
* low (through a resistor) on the LPC17xx side in order to illuminuate them.
|
|
*/
|
|
|
|
#define LPC1766STK_LED1 (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN25)
|
|
#define LPC1766STK_LED2 (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN4)
|
|
|
|
/* Buttons GPIO PIN SIGNAL NAME
|
|
* -------------------------------- ---- --------------
|
|
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
|
|
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
|
|
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
|
|
*
|
|
* NOTES:
|
|
* 1. Pull-ups are not required because the pins are already pulled-up by
|
|
* through resistors on the board.
|
|
* 2. All buttons are capable of supporting interrupts if board_button_irq() is
|
|
* called to attach an interrupt handler. Interrupts are configured to
|
|
* occur on both edges.
|
|
*/
|
|
|
|
#define LPC1766STK_BUT1 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN23)
|
|
#define LPC1766STK_BUT2 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN13)
|
|
#define LPC1766STK_WAKEUP (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN12)
|
|
|
|
/* Button IRQ numbers */
|
|
|
|
#define LPC1766STK_BUT1_IRQ LPC17_IRQ_P0p23
|
|
#define LPC1766STK_BUT2_IRQ LPC17_IRQ_P2p13
|
|
#define LPC1766STK_WAKEUP_IRQ LPC17_IRQ_P2p12
|
|
|
|
/* Joystick GPIO PIN SIGNAL NAME
|
|
* -------------------------------- ---- --------------
|
|
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
|
|
* P2[0]/PWM1[1]/TXD1 75 UP
|
|
* P2[1]/PWM1[2]/RXD1 74 DOWN
|
|
* P2[7]/RD2/RTS1 66 LEFT
|
|
* P2[8]/TD2/TXD2 65 RIGHT
|
|
*
|
|
* NOTES:
|
|
* 1. Pull-ups are not required because the pins are already pulled-up by
|
|
* through resistors on the board.
|
|
* 2. All buttons are capable of supporting interrupts if board_button_irq() is
|
|
* called to attach an interrupt handler. Interrupts are configured to
|
|
* occur on both edges.
|
|
*/
|
|
|
|
#define LPC1766STK_CENTER (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN5)
|
|
#define LPC1766STK_UP (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN0)
|
|
#define LPC1766STK_DOWN (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN1)
|
|
#define LPC1766STK_LEFT (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN7)
|
|
#define LPC1766STK_RIGHT (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN8)
|
|
|
|
/* Joystick IRQ numbers */
|
|
|
|
#define LPC1766STK_CENTER_IRQ LPC17_IRQ_P0p5
|
|
#define LPC1766STK_UP_IRQ LPC17_IRQ_P2p0
|
|
#define LPC1766STK_DOWN_IRQ LPC17_IRQ_P2p1
|
|
#define LPC1766STK_LEFT_IRQ LPC17_IRQ_P2p7
|
|
#define LPC1766STK_RIGHT_IRQ LPC17_IRQ_P2p8
|
|
|
|
/* Nokia LCD GPIO PIN SIGNAL NAME
|
|
* -------------------------------- ---- --------------
|
|
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
|
|
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
|
|
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
|
|
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
|
|
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
|
|
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL (PWM1)
|
|
*/
|
|
|
|
#define LPC1766STK_LCD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN21)
|
|
#define LPC1766STK_LCD_RST (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT3 | GPIO_PIN25)
|
|
#define LPC1766STK_LCD_BL GPIO_PWM1p3_3
|
|
#define GPIO_PWM1p3 GPIO_PWM1p3_3
|
|
|
|
/* SD/MMC GPIO PIN SIGNAL NAME
|
|
* -------------------------------- ---- --------------
|
|
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1 (active low)
|
|
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
|
|
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
|
|
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
|
|
* P0[21]/RI1/RD1 57 MMC PWR (active low)
|
|
*/
|
|
|
|
#define LPC1766STK_MMC_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN6)
|
|
#define LPC1766STK_MMC_PWR (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
|
|
|
|
/* AD GPIO PIN SIGNAL NAME
|
|
* -------------------------------- ---- --------------
|
|
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
|
|
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
|
|
*/
|
|
|
|
#define LPC1766STK_TEMP GPIO_AD0p1
|
|
#define LPC1766STK_MIC_IN GPIO_AD0p2
|
|
|
|
/* UEXT GPIO PIN SIGNAL NAME
|
|
* -------------------------------- ---- --------------
|
|
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
|
|
*/
|
|
|
|
#define LPC1766STK_CS_UEXT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN26)
|
|
|
|
/* ISP? GPIO PIN SIGNAL NAME
|
|
* -------------------------------- ---- --------------
|
|
* P2[10]/#EINT0/NMI 53 ISP_E4
|
|
*/
|
|
|
|
/************************************************************************************
|
|
* Public Types
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public data
|
|
************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
/************************************************************************************
|
|
* Public Functions
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Name: lpc1766stk_sspinitialize
|
|
*
|
|
* Description:
|
|
* Called to configure SPI chip select GPIO pins for the Olimex LPC1766-STK board.
|
|
*
|
|
************************************************************************************/
|
|
|
|
void weak_function lpc1766stk_sspinitialize(void);
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H */
|
|
|