| .. |
|
chip
|
drivers/wireless/ieee802.11: Add capabilility for Broadcom chips to get firmware and CLM data from a mounted file system vs. in-memory data structures.
|
2018-10-07 10:03:39 -06:00 |
|
chip.h
|
arch/: Clean up some naming and spacing.
|
2018-06-20 15:38:06 -06:00 |
|
Kconfig
|
Revert "arch/arm/src/stm32, stm32f7, stm32l4 Kconfig files: The option to select the STM32 RTC should not be available if the external RTC option is selected."
|
2018-08-08 12:51:40 -06:00 |
|
Make.defs
|
arch/arm/src/stm32f7: Port the low-level PM functions to STM32F7.
|
2018-09-04 07:18:12 -06:00 |
|
stm32_adc.c
|
arch/srm/src/stm32f7: add PM hooks to ADC, I2C and SPI.
|
2018-03-06 08:10:50 -06:00 |
|
stm32_adc.h
|
STM32F7: warn if no DMA2 configured when using ADC with DMA. Also correct ADC channel numbers that DMA callback passes to upper half driver.
|
2017-04-18 06:49:51 -06:00 |
|
stm32_alarm.h
|
arch/srm/src/stm32f7: Add CONFIG_RTC_PERIODIC support. Also makes the RTC lowerhalf more like in STM32L4.
|
2018-03-05 07:46:58 -06:00 |
|
stm32_allocateheap.c
|
arch/: Fix an error found in build testing. The protoype of mpu_log2regionfloor() changed; an additional parameter was added. However, none of the calls to mpu_log2regionfloor() were updated to pass the new, additional parameter.
|
2018-08-24 16:40:37 -06:00 |
|
stm32_bbsram.c
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_bbsram.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_capture.c
|
Oops. Forgot to add files that go with the previous commit.
|
2018-06-21 07:15:35 -06:00 |
|
stm32_capture.h
|
Oops. Forgot to add files that go with the previous commit.
|
2018-06-21 07:15:35 -06:00 |
|
stm32_config.h
|
|
|
|
stm32_dbgmcu.h
|
Mostly costmetic changes from review of last PR
|
2016-06-29 07:33:30 -06:00 |
|
stm32_dma2d.c
|
Replace all ASSERT with DEBUGASSERT to save the code space
|
2018-08-24 06:58:30 -06:00 |
|
stm32_dma2d.h
|
drivers/Kconfig: Global configuration variable CONFIG_FB_CMAP is only defined in architecture-specific Kconfig files and then multiple times. Add the single global definition in drivers/Kconfig. arch/arm/src/stm32 and stm32f7: Rename the architecture-specific variables appropriately. Selecting the architecture-specific version will also select the global version.
|
2018-06-28 12:01:55 -06:00 |
|
stm32_dma.c
|
Replace non critical PANIC with DEBUGPANIC to save the code space
|
2018-08-24 06:21:15 -06:00 |
|
stm32_dma.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_dtcm.c
|
|
|
|
stm32_dtcm.h
|
STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722.
|
2017-11-18 07:55:50 -06:00 |
|
stm32_dumpgpio.c
|
STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722.
|
2017-11-18 07:55:50 -06:00 |
|
stm32_ethernet.c
|
Rename devif_loopback_out to devi_loopback
|
2018-08-25 08:33:21 -06:00 |
|
stm32_ethernet.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_exti_alarm.c
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_exti_gpio.c
|
STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722.
|
2017-11-18 07:55:50 -06:00 |
|
stm32_exti_pwr.c
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_exti_pwr.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_exti_wakeup.c
|
drivers/power: add pm_unregister
|
2018-03-06 07:59:17 -06:00 |
|
stm32_exti.h
|
arch/srm/src/stm32f7: Add CONFIG_RTC_PERIODIC support. Also makes the RTC lowerhalf more like in STM32L4.
|
2018-03-05 07:46:58 -06:00 |
|
stm32_flash.c
|
Merged in ebsong/nuttx (pull request #722)
|
2018-09-21 03:18:38 +00:00 |
|
stm32_fmc.h
|
Merged in plwm/nuttx/stm32f746g-disco-sdram (pull request #665)
|
2018-07-02 23:49:55 +00:00 |
|
stm32_gpio.c
|
arch/arm/src/stm32fy: IO compensation is non longer an inline function, just a plain callable function. Not really necessary for the F7, but now the implementation is identical to the F2 and F4.
|
2018-07-16 09:50:10 -06:00 |
|
stm32_gpio.h
|
arch/arm/src/stm32fy: IO compensation is non longer an inline function, just a plain callable function. Not really necessary for the F7, but now the implementation is identical to the F2 and F4.
|
2018-07-16 09:50:10 -06:00 |
|
stm32_i2c.c
|
arch/arm/src/stm32f7: Remove adhoc PM interfaces and add CONFIG_PM serial suspend.
|
2018-09-21 06:44:23 -06:00 |
|
stm32_i2c.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_irq.c
|
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
|
2018-09-21 21:32:50 -06:00 |
|
stm32_lowputc.c
|
|
|
|
stm32_lowputc.h
|
|
|
|
stm32_lse.c
|
STM32F7: add support for LSE RTC and enable RTC subseconds
|
2017-03-31 10:13:40 -06:00 |
|
stm32_lsi.c
|
STM32F7: add support for LSE RTC and enable RTC subseconds
|
2017-03-31 10:13:40 -06:00 |
|
stm32_ltdc.c
|
Replace all ASSERT with DEBUGASSERT to save the code space
|
2018-08-24 06:58:30 -06:00 |
|
stm32_ltdc.h
|
arch/arm/src/stm32 and stm32f7: Make LTDC and DMA2D drivers as similar as possible. Basically they should only differ in the configuratin naming: CONFIG_STM32F7_ vs CONFIG_STM32_. I suspect that the STM32F7 may also require some cache operations with the WRITE_BACK data cache is enabled.
|
2018-06-15 15:10:19 -06:00 |
|
stm32_mpuinit.c
|
|
|
|
stm32_mpuinit.h
|
|
|
|
stm32_otg.h
|
|
|
|
stm32_otgdev.c
|
EFM32, STM32 (FS/HS), STM32F7, and STM32L4 OTGFS/HS: Th epin_configure() function used the same eptype as the TxFIFO number for all endpoints. This should probably be the physical EP number, not the EP type. Suggested by Key Two.
|
2018-10-02 10:10:56 -06:00 |
|
stm32_otghost.c
|
drivers/usbhost/usbhost_max3421e.c: Fix an error in reading the pending interrupts. Aos fix a number of typos and update a README.
|
2018-07-29 15:06:44 -06:00 |
|
stm32_pm.h
|
arch/arm/src/stm32f7: Port the low-level PM functions to STM32F7.
|
2018-09-04 07:18:12 -06:00 |
|
stm32_pminitialize.c
|
arch/arm/src/stm32f7: Port the low-level PM functions to STM32F7.
|
2018-09-04 07:18:12 -06:00 |
|
stm32_pmsleep.c
|
arch/arm/src/stm32f7: Port the low-level PM functions to STM32F7.
|
2018-09-04 07:18:12 -06:00 |
|
stm32_pmstandby.c
|
arch/arm/src/stm32f7: Port the low-level PM functions to STM32F7.
|
2018-09-04 07:18:12 -06:00 |
|
stm32_pmstop.c
|
arch/arm/src/stm32f7: Port the low-level PM functions to STM32F7.
|
2018-09-04 07:18:12 -06:00 |
|
stm32_procfs_dtcm.c
|
|
|
|
stm32_pwr.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_pwr.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_rcc.c
|
arch/arm/src/stm32fy: IO compensation is non longer an inline function, just a plain callable function. Not really necessary for the F7, but now the implementation is identical to the F2 and F4.
|
2018-07-16 09:50:10 -06:00 |
|
stm32_rcc.h
|
stm32_rcc: code style
|
2017-08-01 16:25:19 +02:00 |
|
stm32_rng.c
|
Squashed commit of the following:
|
2017-10-04 15:22:27 -06:00 |
|
stm32_rtc_lowerhalf.c
|
arch/arm/src: Change ASSERT macros to DEBUGASSERT.
|
2018-06-06 06:34:14 -06:00 |
|
stm32_rtc.c
|
arch/arm/src/stm32, stm32f7, stm32l4: Make STM32F4XX RTC depend on CONFIG_STM32_RTC, cosmetic changes to comments
|
2018-08-16 08:05:24 -06:00 |
|
stm32_rtc.h
|
arch/arm/src/stm32,stm32l4,stm32f7: Fix duplicated configuration options. All should be unique.
|
2018-06-27 10:20:14 -06:00 |
|
stm32_sdmmc.c
|
drivers/mmcsd/Kconfig: three configuration settings were within ifdef/endif and led to warning: xxx selects xxxx which has unmet direct dependencies. Fix by moving settings to drivers/Kconfig and outside of the ifdef-endif. Also renamed CONFIG_SDIO_PREFLIGHT to CONFIG_ARCH_HAVE_SDIO_PREFLIGHT to follow naming of similar hidden architecture capability configurations.
|
2018-08-05 17:58:17 -06:00 |
|
stm32_sdmmc.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_serial.c
|
arch/arm/src/stm32f7: Remove adhoc PM interfaces and add CONFIG_PM serial suspend.
|
2018-09-21 06:44:23 -06:00 |
|
stm32_spi.c
|
arch/arm/src/stm32f7: Remove adhoc PM interfaces and add CONFIG_PM serial suspend.
|
2018-09-21 06:44:23 -06:00 |
|
stm32_spi.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_start.c
|
Squashed commit of the following:
|
2018-06-20 12:30:37 -06:00 |
|
stm32_start.h
|
|
|
|
stm32_tim.c
|
Add argument to timer irq callback
|
2017-03-01 08:49:14 -06:00 |
|
stm32_tim.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_timerisr.c
|
irq_dispatch: Add argument pointer to irq_dispatch
|
2017-02-27 06:27:56 -06:00 |
|
stm32_uart.h
|
arch/arm/src/stm32f7: Remove adhoc PM interfaces and add CONFIG_PM serial suspend.
|
2018-09-21 06:44:23 -06:00 |
|
stm32_usbhost.h
|
STM32F7: Remove unsupported configuration item the crept in when header file was cloned.
|
2017-08-13 12:37:59 -06:00 |
|
stm32_userspace.c
|
|
|
|
stm32_userspace.h
|
|
|
|
stm32f72xx73xx_rcc.c
|
Replicate Jussi Kivilinna's change for the newly added STM32F2xx and F3xx family members. This change allows selecting voltage output scale mode and enable over-drive only when needed.
|
2017-11-21 06:44:19 -06:00 |
|
stm32f74xx75xx_rcc.c
|
Squashed commit of the following:
|
2018-05-15 17:08:20 -06:00 |
|
stm32f76xx77xx_rcc.c
|
Squashed commit of the following:
|
2018-05-15 17:08:20 -06:00 |
