nuttx/binfmt/nxflat.c
patacongo 4a7bdfa37c Back-out one relocation type
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1926 42af7a65-404d-4744-a932-0658087f49c3
2009-06-22 22:42:21 +00:00

252 lines
8.1 KiB
C

/****************************************************************************
* binfmt/nxflat.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <string.h>
#include <nxflat.h>
#include <debug.h>
#include <errno.h>
#include <arpa/inet.h>
#include <nuttx/binfmt.h>
#include <nuttx/nxflat.h>
#ifdef CONFIG_NXFLAT
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int nxflat_loadbinary(struct binary_s *binp);
#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_BINFMT)
static void nxflat_dumpmemory(void *addr, int nbytes);
static void nxflat_dumploadinfo(struct nxflat_loadinfo_s *loadinfo);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
static struct binfmt_s g_nxflatbinfmt =
{
NULL, /* next */
nxflat_loadbinary, /* load */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: nnxflat_dumpmemory
****************************************************************************/
#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_BINFMT)
static void nxflat_dumpmemory(void *addr, int nbytes)
{
ubyte *ptr;
bdbg(" ADDRESS VALUE\n");
for (ptr = (ubyte*)addr; nbytes > 0; ptr += 4, nbytes -= 4)
{
bdbg(" %p: %02x %02x %02x %02x\n", ptr, ptr[0], ptr[1], ptr[2], ptr[3]);
}
}
#else
# define nxflat_dumpmemory(a,n)
#endif
/****************************************************************************
* Name: nxflat_dumploadinfo
****************************************************************************/
#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_BINFMT)
static void nxflat_dumploadinfo(struct nxflat_loadinfo_s *loadinfo)
{
unsigned long dsize = loadinfo->datasize + loadinfo->bsssize;
bdbg("LOAD_INFO:\n");
bdbg(" ISPACE:\n");
bdbg(" ispace: %08lx\n", loadinfo->ispace);
bdbg(" entryoffs: %08lx\n", loadinfo->entryoffs);
bdbg(" isize: %08lx\n", loadinfo->isize);
bdbg(" DSPACE:\n");
bdbg(" dspace: %08lx\n", loadinfo->dspace);
bdbg(" datasize: %08lx\n", loadinfo->datasize);
bdbg(" bsssize: %08lx\n", loadinfo->bsssize);
bdbg(" (pad): %08lx\n", loadinfo->dsize - dsize);
bdbg(" stacksize: %08lx\n", loadinfo->stacksize);
bdbg(" dsize: %08lx\n", loadinfo->dsize);
bdbg(" RELOCS:\n");
bdbg(" relocstart: %08lx\n", loadinfo->relocstart);
bdbg(" reloccount: %08lx\n", loadinfo->reloccount);
bdbg(" HANDLES:\n");
bdbg(" filfd: %d\n", loadinfo->filfd);
bdbg(" NXFLT HEADER:");
bdbg(" header: %p\n", loadinfo->header);
}
#else
# define nxflat_dumploadinfo(i)
#endif
/****************************************************************************
* Name: nxflat_loadbinary
*
* Description:
* Verify that the file is an NXFLAT binary and, if so, load the NXFLAT
* binary into memory
*
****************************************************************************/
static int nxflat_loadbinary(struct binary_s *binp)
{
struct nxflat_hdr_s header; /* Just allocated memory */
struct nxflat_loadinfo_s loadinfo; /* Contains globals for libnxflat */
int ret;
bvdbg("Loading file: %s\n", binp->filename);
/* Initialize the xflat library to load the program binary. */
ret = nxflat_init(binp->filename, &header, &loadinfo);
nxflat_dumploadinfo(&loadinfo);
if (ret != 0)
{
bdbg("Failed to initialize for load of NXFLT program: %d\n", ret);
return ret;
}
/* Load the program binary */
ret = nxflat_load(&loadinfo);
nxflat_dumploadinfo(&loadinfo);
if (ret != 0)
{
bdbg("Failed to load NXFLT program binary: %d\n", ret);
nxflat_uninit(&loadinfo);
return ret;
}
/* Bind the program to the exported symbol table */
ret = nxflat_bind(&loadinfo, binp->exports, binp->nexports);
if (ret != 0)
{
bdbg("Failed to bind symbols program binary: %d\n", ret);
nxflat_uninit(&loadinfo);
return ret;
}
/* Return the load information */
binp->entrypt = (main_t)(loadinfo.ispace + loadinfo.entryoffs);
binp->ispace = (void*)loadinfo.ispace;
binp->dspace = (void*)loadinfo.dspace;
binp->isize = loadinfo.isize;
binp->stacksize = loadinfo.stacksize;
bvdbg("ENTRY CODE:\n");
nxflat_dumpmemory(binp->entrypt, 16*sizeof(uint32));
nxflat_uninit(&loadinfo);
return OK;
}
/***********************************************************************
* Public Functions
***********************************************************************/
/***********************************************************************
* Name: nxflat_initialize
*
* Description:
* NXFLAT support is built unconditionally. However, it order to
* use this binary format, this function must be called during system
* format in order to register the NXFLAT binary format.
*
* Returned Value:
* This is a NuttX internal function so it follows the convention that
* 0 (OK) is returned on success and a negated errno is returned on
* failure.
*
***********************************************************************/
int nxflat_initialize(void)
{
int ret;
/* Register ourselves as a binfmt loader */
bvdbg("Registering NXFLAT\n");
ret = register_binfmt(&g_nxflatbinfmt);
if (ret != 0)
{
bdbg("Failed to register binfmt: %d\n", ret);
}
return ret;
}
/****************************************************************************
* Name: nxflat_uninitialize
*
* Description:
* Unregister the NXFLAT binary loader
*
* Returned Value:
* None
*
****************************************************************************/
void nxflat_uninitialize(void)
{
unregister_binfmt(&g_nxflatbinfmt);
}
#endif /* CONFIG_NXFLAT */