nuttx/arch/arm/include/stm32f7/ltdc.h
2017-07-20 07:39:57 -06:00

576 lines
18 KiB
C
Executable File

/****************************************************************************
* arch/arm/include/stm32/ltdc.h
*
* Copyright (C) 2014-2015 Marco Krahl. All rights reserved.
* Author: Marco Krahl <ocram.lhark@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __ARCH_ARM_INCLUDE_STM32F7_LTDC_H
#define __ARCH_ARM_INCLUDE_STM32F7_LTDC_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <nuttx/video/fb.h>
#ifdef CONFIG_STM32F7_LTDC
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Public Types
****************************************************************************/
struct dma2d_layer_s; /* see arch/chip/dma2d.h */
/* Blend mode definitions */
enum ltdc_blend_e
{
LTDC_BLEND_NONE = 0, /* Disable all blend operation */
LTDC_BLEND_ALPHA = 0x1, /* Enable alpha blending */
LTDC_BLEND_PIXELALPHA = 0x2, /* Enable alpha blending from pixel color */
LTDC_BLEND_COLORKEY = 0x4, /* Enable colorkey */
LTDC_BLEND_ALPHAINV = 0x8, /* Inverse alpha blending of source */
LTDC_BLEND_PIXELALPHAINV = 0x10 /* Invers pixel alpha blending of source */
};
/* layer control definitions */
enum ltdc_layer_e
{
LTDC_LAYER_OWN = 0, /* The given layer */
LTDC_LAYER_TOP = 0x1, /* The initialized top layer */
LTDC_LAYER_BOTTOM = 0x2, /* the initialized bottom layer */
LTDC_LAYER_ACTIVE = 0x4, /* The current visible flip layer */
LTDC_LAYER_INACTIVE = 0x8 /* The current invisible flip layer */
#ifdef CONFIG_STM32F7_DMA2D
,LTDC_LAYER_DMA2D = 0x10 /* The dma2d interface layer id */
#endif
};
/* Update operation flag */
enum ltdc_update_e
{
LTDC_UPDATE_NONE = 0, /* Update given layer only */
LTDC_UPDATE_SIM = 0x1, /* Update both layer simultaneous */
LTDC_UPDATE_FLIP = 0x2, /* Perform flip operation */
LTDC_UPDATE_ACTIVATE = 0x4 /* Set the given layer to the active layer */
};
/* sync mode definitions */
enum ltdc_sync_e
{
LTDC_SYNC_NONE = 0, /* Immediately */
LTDC_SYNC_VBLANK = 0x100, /* Upon vertical sync */
LTDC_SYNC_WAIT = 0x200 /* Waits upon vertical sync */
};
/* Definition of the visible layer position and size */
struct ltdc_area_s
{
fb_coord_t xpos; /* X position in pixel */
fb_coord_t ypos; /* Y position in pixel */
fb_coord_t xres; /* X resolution in pixel */
fb_coord_t yres; /* Y resolution in pixel */
};
/* The layer is controlled through the following structure */
struct ltdc_layer_s
{
/* Name: getvideoinfo
*
* Description:
* Get video information about the layer
*
* Parameter:
* layer - Reference to the layer control structure
* vinfo - Reference to the video info structure
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*getvideoinfo)(FAR struct ltdc_layer_s *layer,
FAR struct fb_videoinfo_s *vinfo);
/* Name: getplaneinfo
*
* Description:
* Get plane information about the layer
*
* Parameter:
* layer - Reference to the layer control structure
* planeno - Number of the plane
* pinfo - Reference to the plane info structure
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*getplaneinfo)(FAR struct ltdc_layer_s *layer, int planeno,
FAR struct fb_planeinfo_s *pinfo);
/* Name: getlid
*
* Description:
* Get a specific layer identifier.
*
* Parameter:
* layer - Reference to the layer structure
* lid - Reference to store the layer id
* flag - Operation flag describe the layer identifier
* e.g. get the current active or inactive layer.
* See LTDC_LAYER_* for possible values
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*getlid)(FAR struct ltdc_layer_s *layer, int *lid, uint32_t flag);
#ifdef CONFIG_FB_CMAP
/* Name: setclut
*
* Description:
* Configure layer clut (color lookup table).
* Non clut is defined during initializing.
* Clut is active during next vertical blank period. Do not need an update.
*
* Parameter:
* layer - Reference to the layer structure
* cmap - color lookup table with up the 256 entries
* enable - Enable or disable clut support (if false cmap is ignored and can
* be NULL)
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*setclut)(FAR struct ltdc_layer_s *layer,
const FAR struct fb_cmap_s *cmap);
/* Name: getclut
*
* Description:
* Get configured layer clut (color lookup table).
*
* Parameter:
* layer - Reference to the layer structure
* cmap - Reference to valid color lookup table accept up the 256 color
* entries
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*getclut)(FAR struct ltdc_layer_s *layer, FAR struct fb_cmap_s *cmap);
#endif
/* Name: setcolor
*
* Description:
* Configure layer color for the non active layer area.
* Default value during initializing: 0x00000000
* Color is active after next update.
*
* Parameter:
* layer - Reference to the layer structure
* argb - ARGB8888 color value
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*setcolor)(FAR struct ltdc_layer_s *layer, uint32_t argb);
/* Name: getcolor
*
* Description:
* Get configured layer color for the non active layer area.
*
* Parameter:
* layer - Reference to the layer structure
* argb - Reference to store the ARGB8888 color value
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*getcolor)(FAR struct ltdc_layer_s *layer, uint32_t *argb);
/* Name: setcolorkey
*
* Description:
* Configure the layer color key (chromakey) for transparence.
* Default value during initializing: 0x00000000
* Colorkey is active after next update.
*
* Parameter:
* layer - Reference to the layer structure
* rgb - RGB888 color key
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*setcolorkey)(FAR struct ltdc_layer_s *layer, uint32_t rgb);
/* Name: getcolorkey
*
* Description:
* Get the configured layer color key (chromakey) for transparence.
*
* Parameter:
* layer - Reference to the layer structure
* rgb - Reference to store the RGB888 color key
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*getcolorkey)(FAR struct ltdc_layer_s *layer, uint32_t *rgb);
/* Name: setalpha
*
* Description:
* Configure layer alpha value factor into blend operation.
* During the layer blend operation the source alpha value is multiplied
* with this alpha value. If the source color format doesn't support alpha
* channel (e.g. non ARGB8888) this alpha value will be used as constant
* alpha value for blend operation.
* Default value during initializing: 0xff
* Alpha is active after next update.
*
* Parameter:
* layer - Reference to the layer structure
* alpha - Alpha value
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*setalpha)(FAR struct ltdc_layer_s *layer, uint8_t alpha);
/* Name: getalpha
*
* Description:
* Get configured layer alpha value factor for blend operation.
*
* Parameter:
* layer - Reference to the layer structure
* alpha - Reference to store the alpha value
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*getalpha)(FAR struct ltdc_layer_s *layer, uint8_t *alpha);
/* Name: setblendmode
*
* Description:
* Configure blend mode of the layer.
* Default mode during initializing: LTDC_BLEND_NONE
* Blendmode is active after next update.
*
* Parameter:
* layer - Reference to the layer structure
* mode - Blend mode (see LTDC_BLEND_*)
*
* Return:
* On success - OK
* On error - -EINVAL
*
* Procedure information:
* LTDC_BLEND_NONE:
* Informs the driver to disable all blend operation for the given layer.
* That means the layer is opaque. Note this has no effect on the
* colorkey settings.
*
* LTDC_BLEND_ALPHA:
* Informs the driver to enable alpha blending for the given layer.
*
* LTDC_BLEND_COLORKEY:
* Informs the driver to enable colorkeying for the given layer.
*
* LTDC_BLEND_SRCPIXELALPHA:
* Informs the driver to use the pixel alpha value of the layer instead
* the constant alpha value. This is only useful for ARGB8888
* color format.
*
* LTDC_BLEND_DESTPIXELALPHA:
* Informs the driver to use the pixel alpha value of the subjacent layer
* instead the constant alpha value. This is only useful for ARGB8888
* color format.
*/
int (*setblendmode)(FAR struct ltdc_layer_s *layer, uint32_t mode);
/* Name: getblendmode
*
* Description:
* Get configured blend mode of the layer.
*
* Parameter:
* layer - Reference to the layer structure
* mode - Reference to store the blend mode
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*getblendmode)(FAR struct ltdc_layer_s *layer, uint32_t *mode);
/* Name: setarea
*
* Description:
* Configure visible layer area and the reference position of the first
* pixel of the whole layer which is the first visible top left pixel in
* the active area.
* Default value during initializing:
* xpos = 0
* ypos = 0
* xres = display x resolution
* yres = display y resolution
*
* Area is active after next update.
*
* Parameter:
* layer - Reference to the layer control structure
* area - Reference to the valid area structure for the new active area
* srcxpos - x position of the visible pixel of the whole layer
* srcypos - y position of the visible pixel of the whole layer
*
* Return:
* On success - OK
* On error - -EINVAL
*
* Procedure Information:
* If the srcxpos and srcypos unequal the xpos and ypos of the coord
* structure this acts like moving the visible area to another position on
* the screen during the next update operation.
*/
int (*setarea)(FAR struct ltdc_layer_s *layer,
FAR const struct ltdc_area_s *area,
fb_coord_t srcxpos,
fb_coord_t srcypos);
/* Name: getarea
*
* Description:
* Get configured visible layer area.
*
* Parameter:
* layer - Reference to the layer control structure
* area - Reference to the area structure to store the active area
* srcxpos - Reference to store the referenced x position of the whole layer
* srcypos - Reference to store the reterenced y position of the whole layer
*
* Return:
* On success - OK
* On error - -EINVAL
*/
int (*getarea)(FAR struct ltdc_layer_s *layer,
FAR struct ltdc_area_s *area,
fb_coord_t *srcxpos,
fb_coord_t *srcypos);
/* Name: update
*
* Description:
* Update current layer settings and make changes visible.
*
* Parameter:
* layer - Reference to the layer structure
* mode - operation mode (see LTDC_UPDATE_*)
*
* Return:
* OK - On success
* -EINVAL - If one of the parameter invalid
* -ECANCELED - Operation cancelled, something goes wrong
*
* Procedure information:
* LTDC_UPDATE_SIM:
* Informs the driver to update both ltdc layers simultaneously. Otherwise
* update the given layer only.
*
* LTDC_UPDATE_FLIP:
* Informs the driver to perform a flip operation.
* This only effects the ltdc layer 1 and 2 and can be useful for double
* buffering. Each flip operation changed the active layer ot the inactive
* and vice versa. In the context of the ltdc that means, the inactive layer
* is complete disabled. So the subjacent layer is the background layer
* (background color). To reactivate both layer and their settings perform
* an update without LTDC_UPDATE_FLIP flag.
*
* LTDC_UPDATE_ACTIVATE:
* Informs the driver that the given layer should be the active layer when
* the operation is complete.
*
* LTDC_SYNC_VBLANK:
* Informs the driver to update the layer upon vertical blank. Otherwise
* immediately.
*/
int (*update)(FAR struct ltdc_layer_s *layer, uint32_t mode);
#ifdef CONFIG_STM32F7_DMA2D
/* Name: blit
*
* Description:
* Copy selected area from a source layer to selected position of the
* destination layer.
*
* Parameter:
* dest - Reference to the destination layer
* destxpos - Selected x position of the destination layer
* destypos - Selected y position of the destination layer
* src - Reference to the source layer
* srcarea - Reference to the selected area of the source layer
*
* Return:
* OK - On success
* -EINVAL - If one of the parameter invalid or if the size of the selected
* source area outside the visible area of the destination layer.
* (The visible area usually represents the display size)
*/
int (*blit)(FAR struct ltdc_layer_s *dest,
fb_coord_t destxpos, fb_coord_t destypos,
FAR const struct dma2d_layer_s *src,
FAR const struct ltdc_area_s *srcarea);
/* Name: blend
*
* Description:
* Blends the selected area from a foreground layer with selected position
* of the background layer. Copy the result to the destination layer. Note!
* The content of the foreground and background layer is not changed.
*
* Parameter:
* dest - Reference to the destination layer
* destxpos - Selected x position of the destination layer
* destypos - Selected y position of the destination layer
* fore - Reference to the foreground layer
* forexpos - Selected x position of the foreground layer
* foreypos - Selected y position of the foreground layer
* back - Reference to the background layer
* backarea - Reference to the selected area of the background layer
*
* Return:
* OK - On success
* -EINVAL - If one of the parameter invalid or if the size of the selected
* source area outside the visible area of the destination layer.
* (The visible area usually represents the display size)
*/
int (*blend)(FAR struct ltdc_layer_s *dest,
fb_coord_t destxpos, fb_coord_t destypos,
FAR const struct dma2d_layer_s *fore,
fb_coord_t forexpos, fb_coord_t foreypos,
FAR const struct dma2d_layer_s *back,
FAR const struct ltdc_area_s *backarea);
/* Name: fillarea
*
* Description:
* Fill the selected area of the whole layer with a specific color.
*
* Parameter:
* layer - Reference to the layer structure
* area - Reference to the valid area structure select the area
* color - Color to fill the selected area. Color must be formatted
* according to the layer pixel format.
*
* Return:
* OK - On success
* -EINVAL - If one of the parameter invalid or if the size of the selected
* area outside the visible area of the layer.
*/
int (*fillarea)(FAR struct ltdc_layer_s *layer,
FAR const struct ltdc_area_s *area,
uint32_t color);
#endif
};
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ltdcgetlayer
*
* Description:
* Get the ltdc layer structure to perform hardware layer operation
*
* Parameter:
* lid - Layer identifier
*
* Return:
* Reference to the layer control structure on success or Null if parameter
* invalid.
*
****************************************************************************/
FAR struct ltdc_layer_s *up_ltdcgetlayer(int lid);
#endif /* CONFIG_STM32F7_LTDC */
#endif /* __ARCH_ARM_INCLUDE_STM32F7_LTDC_H */