1170 lines
28 KiB
Plaintext
1170 lines
28 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see misc/tools/kconfig-language.txt.
|
|
#
|
|
|
|
comment "AT91SAM3/4 Configuration Options"
|
|
|
|
choice
|
|
prompt "AT91SAM3/4 Chip Selection"
|
|
default ARCH_CHIP_ATSAM3U4E
|
|
depends on ARCH_CHIP_SAM34
|
|
|
|
config ARCH_CHIP_ATSAM3U4E
|
|
bool "ATSAM3U4E"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3U
|
|
|
|
config ARCH_CHIP_ATSAM3U4C
|
|
bool "ATSAM3U4C"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3U
|
|
|
|
config ARCH_CHIP_ATSAM3U2E
|
|
bool "ATSAM3U2E"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3U
|
|
|
|
config ARCH_CHIP_ATSAM3U2C
|
|
bool "ATSAM3U2C"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3U
|
|
|
|
config ARCH_CHIP_ATSAM3U1E
|
|
bool "ATSAM3U1E"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3U
|
|
|
|
config ARCH_CHIP_ATSAM3U1C
|
|
bool "ATSAM3U1C"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3U
|
|
|
|
config ARCH_CHIP_ATSAM3X8E
|
|
bool "ATSAMSAM3X8E"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3X
|
|
select ARCH_HAVE_EXTNOR
|
|
select ARCH_HAVE_EXTNAND
|
|
select ARCH_HAVE_EXTSRAM0
|
|
select ARCH_HAVE_EXTSRAM1
|
|
|
|
config ARCH_CHIP_ATSAM3X8C
|
|
bool "ATSAM3X8C"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3X
|
|
|
|
config ARCH_CHIP_ATSAM3X4E
|
|
bool "ATSAM3X4E"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3X
|
|
select ARCH_HAVE_EXTNOR
|
|
select ARCH_HAVE_EXTNAND
|
|
select ARCH_HAVE_EXTSRAM0
|
|
select ARCH_HAVE_EXTSRAM1
|
|
|
|
config ARCH_CHIP_ATSAM3X4C
|
|
bool "ATSAM3X4C"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3X
|
|
|
|
config ARCH_CHIP_ATSAM3A8C
|
|
bool "ATSAM3A8C"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3A
|
|
|
|
config ARCH_CHIP_ATSAM3A4C
|
|
bool "ATSAM3A4C"
|
|
select ARCH_CORTEXM3
|
|
select ARCH_CHIP_SAM3A
|
|
|
|
config ARCH_CHIP_ATSAM4LC2C
|
|
bool "ATSAM4LC2C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LC2B
|
|
bool "ATSAM4LC2B"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LC2A
|
|
bool "ATSAM4LC2A"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LC4C
|
|
bool "ATSAM4LC4C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LC4B
|
|
bool "ATSAM4LC4B"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LC4A
|
|
bool "ATSAM4LC4A"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LS2C
|
|
bool "ATSAM4LS2C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LS2B
|
|
bool "ATSAM4LS2B"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LS2A
|
|
bool "ATSAM4LS2A"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LS4C
|
|
bool "ATSAM4LS4C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LS4B
|
|
bool "ATSAM4LS4B"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4LS4A
|
|
bool "ATSAM4LS4A"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4L
|
|
|
|
config ARCH_CHIP_ATSAM4SD32C
|
|
bool "ATSAM4SD32C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4SD32B
|
|
bool "ATSAM4SD32B"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4SD16C
|
|
bool "ATSAM4SD16C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4SD16B
|
|
bool "ATSAM4SD16B"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4SA16C
|
|
bool "ATSAM4SA16C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4SA16B
|
|
bool "ATSAM4SA16B"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4S16C
|
|
bool "ATSAM4S16C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4S16B
|
|
bool "ATSAM4S16B"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4S8C
|
|
bool "ATSAM4S8C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4S8B
|
|
bool "ATSAM4S8B"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4S
|
|
|
|
config ARCH_CHIP_ATSAM4E16E
|
|
bool "ATSAM4E16E"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4E
|
|
|
|
config ARCH_CHIP_ATSAM4E16C
|
|
bool "ATSAM4E16C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4E
|
|
|
|
config ARCH_CHIP_ATSAM4E8E
|
|
bool "ATSAM4E8E"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4E
|
|
|
|
config ARCH_CHIP_ATSAM4E8C
|
|
bool "ATSAM4E8C"
|
|
select ARCH_CORTEXM4
|
|
select ARCH_CHIP_SAM4E
|
|
|
|
endchoice # AT91SAM3/4 Chip Selection
|
|
|
|
config ARCH_CHIP_SAM3U
|
|
bool
|
|
default n
|
|
select ARCH_HAVE_EXTNOR
|
|
select ARCH_HAVE_EXTNAND
|
|
select ARCH_HAVE_EXTSRAM0
|
|
select ARCH_HAVE_EXTSRAM1
|
|
|
|
config ARCH_CHIP_SAM3X
|
|
bool
|
|
default n
|
|
|
|
config ARCH_CHIP_SAM3A
|
|
bool
|
|
default n
|
|
|
|
config ARCH_CHIP_SAM4L
|
|
bool
|
|
default n
|
|
select ARCH_RAMFUNCS
|
|
|
|
config ARCH_CHIP_SAM4E
|
|
bool
|
|
default n
|
|
select ARCH_HAVE_EXTNOR
|
|
select ARCH_HAVE_EXTNAND
|
|
select ARCH_HAVE_EXTSRAM0
|
|
select ARCH_HAVE_EXTSRAM1
|
|
|
|
config ARCH_CHIP_SAM4S
|
|
bool
|
|
default n
|
|
select ARCH_HAVE_EXTNOR
|
|
select ARCH_HAVE_EXTNAND
|
|
select ARCH_HAVE_EXTSRAM0
|
|
select ARCH_HAVE_EXTSRAM1
|
|
|
|
menu "AT91SAM3/4 Peripheral Support"
|
|
|
|
config SAM34_ABDACB
|
|
bool "Audio Bitstream DAC (ABDAC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_ACC
|
|
bool "Analog Comparator (ACC/ACMP)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_ADC
|
|
bool "10-bit ADC Controller (ADC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U
|
|
|
|
config SAM34_ADC12B
|
|
bool "12-bit ADC Controller (ADC12)"
|
|
default n
|
|
depends on !ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_AES
|
|
bool "AES"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_AESA
|
|
bool "Advanced Encryption Standard (AESA)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_AFEC0
|
|
bool "Analog Front End 0 (AFEC0)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_AFEC1
|
|
bool "Analog Front End 1 (AFEC1)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_APBA
|
|
bool "APBA bridge (APBA)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_AST
|
|
bool "Asynchronous Timer (AST)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_CAN0
|
|
bool "CAN0"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_CAN1
|
|
bool "CAN1"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_CATB
|
|
bool "Capacitive Touch Module B (CATB)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_CHIPID
|
|
bool "Chip ID"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_CMCC
|
|
bool "Cortex M Cache Controller (CMCC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_CRCCU
|
|
bool "CRC Calculation Unit (CRCCU)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L || ARCH_CHIP_SAM4S
|
|
|
|
config SAM34_DACC
|
|
bool "Digital To Analog Converter (DACC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4L || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_EIC
|
|
bool "External Interrupt Controller (EIC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_DMAC0
|
|
bool "DMA controller (DMAC0)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4E
|
|
select ARCH_DMA
|
|
|
|
config SAM34_DMAC1
|
|
bool
|
|
default n
|
|
|
|
config SAM34_EMAC
|
|
bool "Ethernet MAC (EMAC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4E
|
|
select NETDEVICES
|
|
select ARCH_HAVE_PHY
|
|
|
|
config SAM34_FREQM
|
|
bool "Frequency Meter (FREQM)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_GLOC
|
|
bool "GLOC"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_HMATRIX
|
|
bool "HMATRIX"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_HRAMC1
|
|
bool "HRAMC1 (picoCache RAM)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_HSMCI
|
|
bool "High Speed Multimedia Card Interface (HSMCI)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
select ARCH_HAVE_SDIO
|
|
select MMCSD
|
|
|
|
config SAM34_IISC
|
|
bool "Inter-IC Sound (I2S) Controller"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_LCDCA
|
|
bool "LCD Controller A (LCDCA)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_NAND
|
|
bool "NAND support"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_OCD
|
|
bool "On-chip DEBUG (OCD)"
|
|
depends on ARCH_CHIP_SAM4L
|
|
default y if DEBUG_SYMBOLS
|
|
default n if !DEBUG_SYMBOLS
|
|
|
|
config SAM34_PARC
|
|
bool "Parallel Capture (PARC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_PDCA
|
|
bool "Peripheral DMA controller (PDC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
select ARCH_DMA
|
|
|
|
config SAM34_PEVC
|
|
bool "Peripheral Event Controller"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM_PICOCACHE
|
|
bool "PicoCACHE"
|
|
default y
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_PICOUART
|
|
bool "PicoUART"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
select ARCH_HAVE_UART
|
|
|
|
config SAM34_PWM
|
|
bool "Pulse Width Modulation (PWM) Controller"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_RTC
|
|
bool "Real Time Clock (RTC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_RTT
|
|
bool "Real Time Timer (RTT)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_SDRAMC
|
|
bool "SDRAM Controller (SDRAMC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A
|
|
|
|
config SAM34_SMC
|
|
bool "Static Memory Controller (SMC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_SPI0
|
|
bool "Serial Peripheral Interface 0 (SPI0)"
|
|
default n
|
|
select SPI
|
|
|
|
config SAM34_SPI1
|
|
bool "Serial Peripheral Interface 1 (SPI1)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A
|
|
select SPI
|
|
|
|
config SAM34_SSC
|
|
bool "Synchronous Serial Controller (SSC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S
|
|
|
|
config SAM34_TC0
|
|
bool "Timer/Counter 0 (TC0)"
|
|
default n
|
|
|
|
config SAM34_TC1
|
|
bool "Timer/Counter 1 (TC1)"
|
|
default n
|
|
|
|
config SAM34_TC2
|
|
bool "Timer/Counter 2 (TC2)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_TC3
|
|
bool "Timer/Counter 3 (TC3)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_TC4
|
|
bool "Timer/Counter 4 (TC4)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_TC5
|
|
bool "Timer/Counter 5 (TC5)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_TC6
|
|
bool "Timer/Counter 6 (TC6)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_TC7
|
|
bool "Timer/Counter 7 (TC7)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_TC8
|
|
bool "Timer/Counter 6 (TC8)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4E
|
|
|
|
config SAM34_TRNG
|
|
bool "True Random Number Generator (TRNG)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_TWIM0
|
|
bool "Two-wire Master Interface 0 (TWIM0)"
|
|
default n
|
|
|
|
config SAM34_TWIS0
|
|
bool "Two-wire Slave Interface 0 (TWIS0)"
|
|
default n
|
|
|
|
config SAM34_TWIM1
|
|
bool "Two-wire Master Interface 1 (TWIM1)"
|
|
default n
|
|
|
|
config SAM34_TWIS1
|
|
bool "Two-wire Slave Interface 1 (TWIS1)"
|
|
default n
|
|
|
|
config SAM34_TWIM2
|
|
bool "Two-wire Master Interface 2 (TWIM2)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_TWIM3
|
|
bool "Two-wire Master Interface 3 (TWIM3)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_UART0
|
|
bool "UART 0"
|
|
default y
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
select ARCH_HAVE_UART0
|
|
|
|
config SAM34_UART1
|
|
bool "UART 1"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
select ARCH_HAVE_UART1
|
|
|
|
config SAM34_UDP
|
|
bool "USB Device Full Speed (UDP)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4S || ARCH_CHIP_SAM4E
|
|
select ARCH_USBDEV_STALLQUEUE
|
|
|
|
config SAM34_UDPHS
|
|
bool "USB Device High Speed (UDPHS)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3U
|
|
|
|
config SAM34_UOTGHS
|
|
bool "USB OTG High Speed (UOTGHS)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3A || ARCH_CHIP_SAM3X
|
|
|
|
config SAM34_USBC
|
|
bool "USB 2.0 Interface (USBC)"
|
|
default n
|
|
depends on ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_USART0
|
|
bool "USART 0"
|
|
default n
|
|
select ARCH_HAVE_USART0
|
|
|
|
config SAM34_USART1
|
|
bool "USART 1"
|
|
default n
|
|
select ARCH_HAVE_USART1
|
|
|
|
config SAM34_USART2
|
|
bool "USART 2"
|
|
default n
|
|
select ARCH_HAVE_USART2
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_USART3
|
|
bool "USART 3"
|
|
default n
|
|
select ARCH_HAVE_USART3
|
|
depends on ARCH_CHIP_SAM3U || ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A || ARCH_CHIP_SAM4L
|
|
|
|
config SAM34_WDT
|
|
bool "Watchdog Timer (WDT)"
|
|
default n
|
|
|
|
endmenu # AT91SAM3/4 Peripheral Support
|
|
|
|
if ARCH_CHIP_SAM4L
|
|
menu "AT91SAM3/4 Clock Configuration"
|
|
|
|
config SAM34_RESET_PERIPHCLKS
|
|
bool "Enable all peripheral clocks on reset"
|
|
default n
|
|
---help---
|
|
By default, only a few necessary peripheral clocks are enabled at
|
|
reset. If this setting is enabled, then all clocking will be enabled
|
|
to all of the selected peripherals on reset.
|
|
|
|
config SAM34_OSC0
|
|
bool "External oscillator 0"
|
|
default n
|
|
---help---
|
|
Oscillator 0 might be automatically selected for several reasons:
|
|
Oscillator 0 might be the system clock or the source clock for
|
|
either PLL0 or DFPLL. It might also be needed if OSC0 is the source
|
|
clock for GCLK9. By selecting SAM34_OSC0, you can also force the
|
|
clock to be enabled at boot time for other uses.
|
|
|
|
config SAM34_OSC32K
|
|
bool "32.768KHz external oscillator"
|
|
default n
|
|
---help---
|
|
The 32K oscillator might be automatically selected for several
|
|
reasons: The 32K oscillator may be the source clock for DFPLL0 or
|
|
the source clock for GLK9 that might be used to driver PLL0. By
|
|
selecting SAM34_OSC32K, you can also force the clock to be enabled
|
|
at boot time. OSC32 may needed by other devices as well (AST, WDT,
|
|
PICUART, RTC).
|
|
|
|
config SAM34_RC80M
|
|
bool "80MHz RC oscillator"
|
|
default n
|
|
---help---
|
|
The 80MHz RC oscillator might be automatically selected for several
|
|
reasons: This might be the system clock or the source clock for the
|
|
DFPLL or it could be the source for GCLK9 that drives PLL0. By
|
|
selecting SAM34_RC80M, you can also force the clock to be enabled at
|
|
boot time for other uses.
|
|
|
|
config SAM34_RCFAST
|
|
bool "Fast RC oscillator"
|
|
default n
|
|
---help---
|
|
The fast RC oscillator might be automatically selected for several
|
|
reasons: The 12/8/4 fast RC oscillator may be used as the system
|
|
clock or as the source for GLCK9 that drives PLL0. If not then, it
|
|
may be enabled by setting the SAM34_RCFASTxM configuration variable.
|
|
|
|
if SAM34_RCFAST
|
|
choice
|
|
prompt "Fast RC Oscillator Speed"
|
|
default SAM34_RCFAST8M
|
|
|
|
config SAM34_RCFAST12M
|
|
bool "12MHz"
|
|
|
|
config SAM34_RCFAST8M
|
|
bool "8MHz"
|
|
|
|
config SAM34_RCFAST4M
|
|
bool "4MHz"
|
|
|
|
endchoice # Fast RC Oscillator Speed
|
|
endif # SAM34_RCFAST
|
|
|
|
config SAM34_RC1M
|
|
bool "1MHz RC oscillator"
|
|
default n
|
|
---help---
|
|
The 1MHz RC oscillator might be automatically selected for several
|
|
reasons: The 1MHz RC oscillator may be used as the system block or
|
|
may be the source clock for GLCK9 that drives PLL0. By selecting
|
|
SAM34_RC1M, you can also force the clock to be enabled at boot time
|
|
for other purposes.
|
|
|
|
config SAM34_RC32K
|
|
bool "32KHz RC oscillator"
|
|
default n
|
|
---help---
|
|
The 32KHz RC oscillator might be automatically selected for several
|
|
reasons: The 32KHz RC oscillator may be used as the input to DFLL0
|
|
or as the input to GCLK9 that drives PLL0. By selecting SAM34_RC32K,
|
|
you can also force the clock to be enabled at boot time for other
|
|
purposes.
|
|
|
|
endmenu # AT91SAM3/4 Clock Configuration
|
|
endif # ARCH_CHIP_SAM4L
|
|
|
|
menu "AT91SAM3/4 External Memory Configuration"
|
|
|
|
config ARCH_HAVE_EXTNAND
|
|
bool
|
|
|
|
config ARCH_HAVE_EXTNOR
|
|
bool
|
|
|
|
config ARCH_HAVE_EXTDRAM
|
|
bool
|
|
|
|
config ARCH_HAVE_EXTSRAM0
|
|
bool
|
|
|
|
config ARCH_HAVE_EXTSRAM1
|
|
bool
|
|
|
|
config SAM34_EXTNAND
|
|
bool "Configure external NAND"
|
|
default n
|
|
depends on ARCH_HAVE_EXTNAND
|
|
---help---
|
|
Configure external NAND memory and, if applicable, map then external
|
|
NAND into the memory map.
|
|
|
|
if SAM34_EXTNAND
|
|
|
|
config SAM34_EXTNANDSIZE
|
|
int "External NAND size"
|
|
default 0
|
|
---help---
|
|
Size of the external NAND in bytes.
|
|
|
|
endif # SAM34_EXTNAND
|
|
|
|
config SAM34_EXTNOR
|
|
bool "Configure external NOR memory"
|
|
default n
|
|
depends on ARCH_HAVE_EXTNOR
|
|
---help---
|
|
Configure external NOR memory and, if applicable, map then external
|
|
NOR into the memory map.
|
|
|
|
if SAM34_EXTNOR
|
|
|
|
config SAM34_EXTNORSIZE
|
|
int "External NOR size"
|
|
default 0
|
|
---help---
|
|
Size of the external NOR in bytes.
|
|
|
|
endif # SAM34_EXTNOR
|
|
|
|
config SAM34_EXTDRAM
|
|
bool "Configure external DRAM"
|
|
default n
|
|
depends on ARCH_HAVE_EXTDRAM
|
|
select ARCH_HAVE_SDRAM
|
|
---help---
|
|
Configure external DRAM memory and, if applicable, map then external
|
|
DRAM into the memory map.
|
|
|
|
if SAM34_EXTDRAM
|
|
|
|
config SAM34_EXTDRAMSIZE
|
|
int "External SDRAM size"
|
|
default 0
|
|
---help---
|
|
Size of the external SDRAM in bytes.
|
|
|
|
choice
|
|
prompt "SDRAM Width Selection"
|
|
default SAM34_SDRAM_16BIT
|
|
|
|
config SAM34_SDRAM_8BIT
|
|
bool "8-bit"
|
|
|
|
config SAM34_SDRAM_16BIT
|
|
bool "16-bit"
|
|
|
|
config SAM34_SDRAM_32BIT
|
|
bool "32-bit"
|
|
|
|
endchoice # SDRAM Width Selection
|
|
|
|
config SAM34_EXTDRAMHEAP
|
|
bool "Add external SDRAM to the heap"
|
|
default y
|
|
---help---
|
|
Add the external SDRAM into the heap.
|
|
|
|
endif # SAM34_EXTDRAM
|
|
|
|
config SAM34_EXTSRAM0
|
|
bool "Configure external SRAM (Bank 0)"
|
|
default n
|
|
depends on ARCH_HAVE_EXTSRAM0
|
|
---help---
|
|
Configure external SRAM Bank 0 memory and, if applicable, map then
|
|
external SRAM Bank 0 into the memory map.
|
|
|
|
if SAM34_EXTSRAM0
|
|
|
|
config SAM34_EXTSRAM0SIZE
|
|
int "External SRAM size"
|
|
default 0
|
|
---help---
|
|
Size of the external SRAM Bank 0 in bytes.
|
|
|
|
config SAM34_EXTSRAM0HEAP
|
|
bool "Add external SRAM (Bank 0) to the heap"
|
|
default y
|
|
---help---
|
|
Add external SRAM Bank 0 into the heap.
|
|
|
|
endif # SAM34_EXTSRAM0
|
|
|
|
config SAM34_EXTSRAM1
|
|
bool "Configure external SRAM (Bank 1)"
|
|
default n
|
|
depends on ARCH_HAVE_EXTSRAM1
|
|
---help---
|
|
Configure external SRAM Bank 1 memory and, if applicable, map then
|
|
external SRAM Bank 1 into the memory map.
|
|
|
|
if SAM34_EXTSRAM1
|
|
|
|
config SAM34_EXTSRAM1SIZE
|
|
int "External SRAM1 size"
|
|
default 0
|
|
---help---
|
|
Size of the external SRAM Bank 1 in bytes.
|
|
|
|
config SAM34_EXTSRAM1HEAP
|
|
bool "Add external SRAM (Bank 1) to the heap"
|
|
default y
|
|
---help---
|
|
Add external SRAM Bank 1 into the heap.
|
|
|
|
endif # SAM34_EXTSRAM1
|
|
endmenu # External Memory Configuration
|
|
|
|
menu "AT91SAM3/4 GPIO Interrupt Configuration"
|
|
|
|
config SAM34_GPIO_IRQ
|
|
bool "GPIO pin interrupts"
|
|
---help---
|
|
Enable support for interrupting GPIO pins
|
|
|
|
if SAM34_GPIO_IRQ
|
|
|
|
config SAM34_GPIOA_IRQ
|
|
bool "GPIOA interrupts"
|
|
default n
|
|
|
|
config SAM34_GPIOB_IRQ
|
|
bool "GPIOB interrupts"
|
|
default n
|
|
|
|
config SAM34_GPIOC_IRQ
|
|
bool "GPIOC interrupts"
|
|
default n
|
|
|
|
config SAM34_GPIOD_IRQ
|
|
bool "GPIOD interrupts"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A
|
|
|
|
config SAM34_GPIOE_IRQ
|
|
bool "GPIOE interrupts"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A
|
|
|
|
config SAM34_GPIOF_IRQ
|
|
bool "GPIOF interrupts"
|
|
default n
|
|
depends on ARCH_CHIP_SAM3X || ARCH_CHIP_SAM3A
|
|
|
|
endif # SAM34_GPIO_IRQ
|
|
endmenu # AT91SAM3/4 GPIO Interrupt Configuration
|
|
|
|
if SAM34_SPI0 || SAM34_SPI1
|
|
|
|
menu "AT91SAM3/4 SPI device driver options"
|
|
|
|
config SAM34_SPI_DMA
|
|
bool "SPI DMA"
|
|
default n
|
|
depends on (SAM34_DMAC0 && SAM34_SPI0) || (SAM34_DMAC1 && SAM34_SPI1)
|
|
---help---
|
|
Use DMA to improve SPI transfer performance.
|
|
|
|
config SAM34_SPI_DMATHRESHOLD
|
|
int "SPI DMA threshold"
|
|
default 4
|
|
depends on SAM34_SPI_DMA
|
|
---help---
|
|
When SPI DMA is enabled, small DMA transfers will still be performed
|
|
by polling logic. But we need a threshold value to determine what
|
|
is small. That value is provided by SAM34_SPI_DMATHRESHOLD.
|
|
|
|
config SAM34_SPI_DMADEBUG
|
|
bool "SPI DMA transfer debug"
|
|
depends on SAM34_SPI_DMA && DEBUG && DEBUG_DMA
|
|
default n
|
|
---help---
|
|
Enable special debug instrumentation analyze SPI DMA data transfers.
|
|
This logic is as non-invasive as possible: It samples DMA
|
|
registers at key points in the data transfer and then dumps all of
|
|
the registers at the end of the transfer.
|
|
|
|
config SAM34_SPI_REGDEBUG
|
|
bool "SPI Register level debug"
|
|
depends on DEBUG
|
|
default n
|
|
---help---
|
|
Output detailed register-level SPI device debug information.
|
|
Requires also DEBUG.
|
|
|
|
endmenu # AT91SAM3/4 SPI device driver options
|
|
endif # SAM34_SPI0 || SAM34_SPI1
|
|
|
|
if SAM34_EMAC
|
|
|
|
menu "AT91SAM3/4 EMAC device driver options"
|
|
|
|
config SAM34_EMAC_NRXBUFFERS
|
|
int "Number of RX buffers"
|
|
default 16
|
|
---help---
|
|
EMAC buffer memory is segmented into 128 byte units (not
|
|
configurable). This setting provides the number of such 128 byte
|
|
units used for reception. This is also equal to the number of RX
|
|
descriptors that will be allocated The selected value must be an
|
|
even power of 2.
|
|
|
|
config SAM34_EMAC_NTXBUFFERS
|
|
int "Number of TX buffers"
|
|
default 8
|
|
---help---
|
|
EMAC buffer memory is segmented into full Ethernet packets (size
|
|
NET_BUFSIZE bytes). This setting provides the number of such packets
|
|
that can be in flight. This is also equal to the number of TX
|
|
descriptors that will be allocated.
|
|
|
|
config SAM34_EMAC_PREALLOCATE
|
|
bool "Preallocate buffers"
|
|
default n
|
|
---help---
|
|
Buffer an descriptor many may either be allocated from the memory
|
|
pool or pre-allocated to lie in .bss. This options selected pre-
|
|
allocated buffer memory.
|
|
|
|
config SAM34_EMAC_NBC
|
|
bool "Disable Broadcast"
|
|
default n
|
|
---help---
|
|
Select to disable receipt of broadcast packets.
|
|
|
|
config SAM34_EMAC_PHYADDR
|
|
int "PHY address"
|
|
default 1
|
|
---help---
|
|
The 5-bit address of the PHY on the board. Default: 1
|
|
|
|
config SAM34_EMAC_PHYINIT
|
|
bool "Board-specific PHY Initialization"
|
|
default n
|
|
---help---
|
|
Some boards require specialized initialization of the PHY before it can be used.
|
|
This may include such things as configuring GPIOs, resetting the PHY, etc. If
|
|
SAM34_EMAC_PHYINIT is defined in the configuration then the board specific logic must
|
|
provide sam_phyinitialize(); The SAM34 EMAC driver will call this function
|
|
one time before it first uses the PHY.
|
|
|
|
choice
|
|
prompt "PHY interface"
|
|
default SAM34_EMAC_MII
|
|
|
|
config SAM34_EMAC_MII
|
|
bool "MII"
|
|
---help---
|
|
Support Ethernet MII interface (vs RMII).
|
|
|
|
config SAM34_EMAC_RMII
|
|
bool "RMII"
|
|
depends on !ARCH_CHIP_SAM4E
|
|
---help---
|
|
Support Ethernet RMII interface (vs MII).
|
|
|
|
endchoice # PHY interface
|
|
|
|
config SAM34_EMAC_CLAUSE45
|
|
bool "Clause 45 MII"
|
|
depends on SAM34_EMAC_MII
|
|
---help---
|
|
MDIO was originally defined in Clause 22 of IEEE RFC802.3. In the
|
|
original specification, a single MDIO interface is able to access up
|
|
to 32 registers in 32 different PHY devices. To meet the needs the
|
|
expanding needs of 10-Gigabit Ethernet devices, Clause 45 of the
|
|
802.3ae specification provided the following additions to MDIO:
|
|
|
|
- Ability to access 65,536 registers in 32 different devices on
|
|
32 different ports
|
|
- Additional OP-code and ST-code for Indirect Address register
|
|
access for 10 Gigabit Ethernet
|
|
- End-to-end fault signaling
|
|
- Multiple loopback points
|
|
- Low voltage electrical specification
|
|
|
|
By default, Clause 22 PHYs will be supported unless this option is
|
|
selected.
|
|
|
|
config SAM34_EMAC_AUTONEG
|
|
bool "Use autonegotiation"
|
|
default y
|
|
---help---
|
|
Use PHY autonegotiation to determine speed and mode
|
|
|
|
config SAM34_EMAC_ETHFD
|
|
bool "Full duplex"
|
|
default n
|
|
depends on !SAM34_EMAC_AUTONEG
|
|
---help---
|
|
If SAM34_EMAC_AUTONEG is not defined, then this may be defined to select full duplex
|
|
mode. Default: half-duplex
|
|
|
|
config SAM34_EMAC_ETH100MBPS
|
|
bool "100 Mbps"
|
|
default n
|
|
depends on !SAM34_EMAC_AUTONEG
|
|
---help---
|
|
If SAM34_EMAC_AUTONEG is not defined, then this may be defined to select 100 MBps
|
|
speed. Default: 10 Mbps
|
|
|
|
config SAM34_EMAC_PHYSR
|
|
int "PHY Status Register Address (decimal)"
|
|
depends on SAM34_EMAC_AUTONEG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. The PHY status register
|
|
address may diff from PHY to PHY. This configuration sets the address of
|
|
the PHY status register.
|
|
|
|
config SAM34_EMAC_PHYSR_ALTCONFIG
|
|
bool "PHY Status Alternate Bit Layout"
|
|
default n
|
|
depends on SAM34_EMAC_AUTONEG
|
|
---help---
|
|
Different PHYs present speed and mode information in different ways. Some
|
|
will present separate information for speed and mode (this is the default).
|
|
Those PHYs, for example, may provide a 10/100 Mbps indication and a separate
|
|
full/half duplex indication. This options selects an alternative representation
|
|
where speed and mode information are combined. This might mean, for example,
|
|
separate bits for 10HD, 100HD, 10FD and 100FD.
|
|
|
|
config SAM34_EMAC_PHYSR_SPEED
|
|
hex "PHY Speed Mask"
|
|
depends on SAM34_EMAC_AUTONEG && !SAM34_EMAC_PHYSR_ALTCONFIG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. This provides bit mask
|
|
for isolating the 10 or 100MBps speed indication.
|
|
|
|
config SAM34_EMAC_PHYSR_100MBPS
|
|
hex "PHY 100Mbps Speed Value"
|
|
depends on SAM34_EMAC_AUTONEG && !SAM34_EMAC_PHYSR_ALTCONFIG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. This provides the value
|
|
of the speed bit(s) indicating 100MBps speed.
|
|
|
|
config SAM34_EMAC_PHYSR_MODE
|
|
hex "PHY Mode Mask"
|
|
depends on SAM34_EMAC_AUTONEG && !SAM34_EMAC_PHYSR_ALTCONFIG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. This provide bit mask
|
|
for isolating the full or half duplex mode bits.
|
|
|
|
config SAM34_EMAC_PHYSR_FULLDUPLEX
|
|
hex "PHY Full Duplex Mode Value"
|
|
depends on SAM34_EMAC_AUTONEG && !SAM34_EMAC_PHYSR_ALTCONFIG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. This provides the
|
|
value of the mode bits indicating full duplex mode.
|
|
|
|
config SAM34_EMAC_PHYSR_ALTMODE
|
|
hex "PHY Mode Mask"
|
|
depends on SAM34_EMAC_AUTONEG && SAM34_EMAC_PHYSR_ALTCONFIG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. This provide bit mask
|
|
for isolating the speed and full/half duplex mode bits.
|
|
|
|
config SAM34_EMAC_PHYSR_10HD
|
|
hex "10MBase-T Half Duplex Value"
|
|
depends on SAM34_EMAC_AUTONEG && SAM34_EMAC_PHYSR_ALTCONFIG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. This is the value
|
|
under the bit mask that represents the 10Mbps, half duplex setting.
|
|
|
|
config SAM34_EMAC_PHYSR_100HD
|
|
hex "100Base-T Half Duplex Value"
|
|
depends on SAM34_EMAC_AUTONEG && SAM34_EMAC_PHYSR_ALTCONFIG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. This is the value
|
|
under the bit mask that represents the 100Mbps, half duplex setting.
|
|
|
|
config SAM34_EMAC_PHYSR_10FD
|
|
hex "10Base-T Full Duplex Value"
|
|
depends on SAM34_EMAC_AUTONEG && SAM34_EMAC_PHYSR_ALTCONFIG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. This is the value
|
|
under the bit mask that represents the 10Mbps, full duplex setting.
|
|
|
|
config SAM34_EMAC_PHYSR_100FD
|
|
hex "100Base-T Full Duplex Value"
|
|
depends on SAM34_EMAC_AUTONEG && SAM34_EMAC_PHYSR_ALTCONFIG
|
|
---help---
|
|
This must be provided if SAM34_EMAC_AUTONEG is defined. This is the value
|
|
under the bit mask that represents the 100Mbps, full duplex setting.
|
|
|
|
config SAM34_EMAC_REGDEBUG
|
|
bool "Register-Level Debug"
|
|
default n
|
|
depends on DEBUG
|
|
---help---
|
|
Enable very low-level register access debug. Depends on DEBUG.
|
|
|
|
config SAM34_EMAC_ISETH0
|
|
bool
|
|
default y if !SAM34_EMAC || !SAM34_GMAC_ISETH0
|
|
default n if SAM34_EMAC && SAM34_GMAC_ISETH0
|
|
|
|
endmenu # EMAC device driver options
|
|
endif # SAM34_EMAC
|
|
|
|
if SAM34_UDP
|
|
menu "AT91SAM3/4 USB Full Speed Device Controller driver (DCD) options"
|
|
|
|
config SAM34_UDP_REGDEBUG
|
|
bool "Enable low-level UDP register debug"
|
|
default n
|
|
depends on DEBUG
|
|
|
|
endmenu # USB Full Speed Device Controller driver (DCD) options
|
|
endif # SAM34_UDP
|
|
|
|
if SAM34_WDT
|
|
comment "AT91SAM3/4 Watchdog Configuration"|
|
|
|
|
config WDT_ENABLED_ON_RESET
|
|
bool "Enabled on reset"
|
|
default n
|
|
---help---
|
|
The WDT can be enabled at reset. This is controlled by the WDTAUTO
|
|
fuse. The WDT will be set in basic mode, RCSYS is set as source for
|
|
CLK_CNT, and PSEL will be set to a value giving Tpsel above 100 ms
|
|
(SAM4L)
|
|
|
|
This setting informs that start-up logic that the watchdog is
|
|
enabled.
|
|
|
|
config WDT_DISABLE_ON_RESET
|
|
bool "Disable on reset"
|
|
default n
|
|
depends on WDT_ENABLED_ON_RESET
|
|
---help---
|
|
If the WDT can be enabled at reset then this setting may be used to
|
|
configure and disable the watchdog timer very early in the boot
|
|
sequence.
|
|
|
|
endif # SAM34_WDT
|