nuttx

bt_atomic.c

wireless/bluetooth and include/nutt/net: Add support for Bluetooth IOCTL commands.

2018-03-30 10:50:44 -06:00

bt_atomic.h

wireless/bluetooth and include/nutt/net: Add support for Bluetooth IOCTL commands.

2018-03-30 10:50:44 -06:00

bt_att.c

wireless/bluetooth and net/bluetooth: Clean up some garbage left in Kconfig file that broke 'make menuconfig'. Clean up some craziness with Bluetooth frame length definitions.

2018-04-01 15:21:58 -06:00

bt_att.h

Squashed commit of the following:

2018-04-01 12:25:30 -06:00

bt_buf.c

drivers/bluetooth: Extend device simulation. Now makes it all the way through initialization without error. wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features.

2018-04-06 16:22:49 -06:00

bt_buf.h

Squashed commit of the following:

2018-04-01 12:25:30 -06:00

bt_conn.c

wireless/bluetooth: Completes basic Rx/Tx data paths. Still missing: device address discovery and pairing logic.

2018-04-02 06:38:31 -06:00

bt_conn.h

wireless/bluetooth: Adds most of the logic to get the Tx path working. Still missing the logic to recover the Bluetooth connection structure given the destination address in the socket address.

2018-04-01 14:00:40 -06:00

bt_gatt.c

Squashed commit of the following:

2018-04-01 12:25:30 -06:00

bt_hcicore.c

drivers/bluetooth: Extend NULL driver to support a little more testing.

2018-04-06 14:07:03 -06:00

bt_hcicore.h

Squashed commit of the following:

2018-04-01 12:25:30 -06:00

bt_ioctl.c

drivers/bluetooth: Extend device simulation. Now makes it all the way through initialization without error. wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features.

2018-04-06 16:22:49 -06:00

bt_ioctl.h

This comment adds (1) basic support for AF_BLUETOOTH sockets. The logic compiles but is still incomplete. Support for Bluetooth is general is still dependent on CONFIG_EXPERMIMENTAL because it is not yet ready for used.

2018-03-31 14:55:03 -06:00

bt_keys.c

This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package.

2018-03-29 12:39:22 -06:00

bt_keys.h

This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package.

2018-03-29 12:39:22 -06:00

bt_l2cap.c

wireless/bluetooth: Adds most of the logic to get the Tx path working. Still missing the logic to recover the Bluetooth connection structure given the destination address in the socket address.

2018-04-01 14:00:40 -06:00

bt_l2cap.h

Squashed commit of the following:

2018-04-01 12:25:30 -06:00

bt_netdev.c

net/bluetooth: Since the max header is always reported, the max frame size for purposes of allocation is the max header lenght plus the max payload, even though the frames with the max payload never have the max header length.

2018-04-05 16:40:59 -06:00

bt_queue.c

wireless/bluetooth: A few trivial fixes from initial testing with the simulator. The simulated Bluetooth device is probably going to be in adequate for any level of testing.

2018-04-03 16:28:22 -06:00

bt_queue.h

wireless/bluetooth: With change the test with the simulated bluetooth driver can get all the way up the point where it determines that the attached controller is not LE capable. I am not sure how much first to take the simulation. The time would probably be better invested in bringing up real hardware.

2018-04-03 17:57:06 -06:00

bt_smp.c

drivers/bluetooth: Extend device simulation. Now makes it all the way through initialization without error. wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features.

2018-04-06 16:22:49 -06:00

bt_smp.h

Squashed commit of the following:

2018-04-01 12:25:30 -06:00

bt_uuid.c

This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package.

2018-03-29 12:39:22 -06:00

Kconfig

wireless/bluetooth and net/bluetooth: Clean up some garbage left in Kconfig file that broke 'make menuconfig'. Clean up some craziness with Bluetooth frame length definitions.

2018-04-01 15:21:58 -06:00

Make.defs

This comment adds (1) basic support for AF_BLUETOOTH sockets. The logic compiles but is still incomplete. Support for Bluetooth is general is still dependent on CONFIG_EXPERMIMENTAL because it is not yet ready for used.

2018-03-31 14:55:03 -06:00