nuttx/boards/risc-v/esp32c3/esp32c3-devkit/scripts/esp32c3.ld
Gustavo Henrique Nihei ba23526e39 boards/esp32c3-devkit: Allocate .noinit in a dedicated section
Previously it was being allocated into .bss section after the _ebss
address. Although functional, this is not intuitive.
2021-04-28 15:40:49 +01:00

246 lines
5.4 KiB
Plaintext

/****************************************************************************
* boards/risc-v/esp32c3/esp32c3-devkit/scripts/esp32c3.ld
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* Default entry point: */
ENTRY(__start);
SECTIONS
{
.iram0.text :
{
_iram_start = ABSOLUTE(.);
/* Vectors go to start of IRAM */
KEEP(*(.exception_vectors.text));
. = ALIGN(4);
*(.iram1)
*(.iram1.*)
*(.wifi0iram .wifi0iram.*)
*(.wifirxiram .wifirxiram.*)
*(.wifislpiram .wifislpiram.*)
*(.wifislprxiram .wifislprxiram.*)
} >iram0_0_seg
/* This section is required to skip .iram0.text area because iram0_0_seg
* and dram0_0_seg reflect the same address space on different buses.
*/
.dram0.dummy (NOLOAD):
{
. = ORIGIN(dram0_0_seg) + _iram_end - _iram_start;
} >dram0_0_seg
/* Shared RAM */
.dram0.bss (NOLOAD) :
{
. = ALIGN (8);
_sbss = ABSOLUTE(.);
*(.dynsbss)
*(.sbss)
*(.sbss.*)
*(.gnu.linkonce.sb.*)
*(.scommon)
*(.sbss2)
*(.sbss2.*)
*(.gnu.linkonce.sb2.*)
*(.dynbss)
*(.bss)
*(.bss.*)
*(.share.mem)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN (8);
_ebss = ABSOLUTE(.);
} >dram0_0_seg
.noinit (NOLOAD):
{
/* This section contains data that is not initialized during load,
* or during the application's initialization sequence.
*/
*(.noinit)
*(.noinit.*)
} >dram0_0_seg
.dram0.data :
{
_sdata = ABSOLUTE(.);
*(.data)
*(.data.*)
*(.gnu.linkonce.d.*)
*(.data1)
__global_pointer$ = . + 0x800;
*(.sdata)
*(.sdata.*)
*(.gnu.linkonce.s.*)
*(.sdata2)
*(.sdata2.*)
*(.gnu.linkonce.s2.*)
*(.jcr)
*(.dram1)
*(.dram1.*)
. = ALIGN(4);
_edata = ABSOLUTE(.);
/* Heap starts at the end of .data */
_sheap = ABSOLUTE(.);
} >dram0_0_seg
.flash.text :
{
_stext = .;
*(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
*(.irom0.text) /* catch stray ICACHE_RODATA_ATTR */
*(.fini.literal)
*(.fini)
*(.gnu.version)
_etext = .;
/* Similar to _iram_start, this symbol goes here so it is
* resolved by addr2line in preference to the first symbol in
* the flash.text segment.
*/
_flash_cache_start = ABSOLUTE(0);
} >default_code_seg
.flash_rodata_dummy (NOLOAD):
{
. = SIZEOF(.flash.text);
. = ALIGN(0x10000) + 0x20;
} >drom0_0_seg
.flash.rodata : ALIGN(0x10)
{
_srodata = ABSOLUTE(.);
*(.rodata)
*(.rodata.*)
*(.srodata.*)
*(.irom1.text) /* catch stray ICACHE_RODATA_ATTR */
*(.gnu.linkonce.r.*)
*(.rodata1)
__XT_EXCEPTION_TABLE_ = ABSOLUTE(.);
*(.xt_except_table)
*(.gcc_except_table .gcc_except_table.*)
*(.gnu.linkonce.e.*)
*(.gnu.version_r)
. = (. + 3) & ~ 3;
__eh_frame = ABSOLUTE(.);
KEEP(*(.eh_frame))
. = (. + 7) & ~ 3;
/* C++ constructor and destructor tables: */
_sinit = ABSOLUTE(.);
KEEP (*crtbegin.o(.ctors))
KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
_einit = ABSOLUTE(.);
KEEP (*crtbegin.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
/* C++ exception handlers table: */
__XT_EXCEPTION_DESCS_ = ABSOLUTE(.);
*(.xt_except_desc)
*(.gnu.linkonce.h.*)
__XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
*(.xt_except_desc_end)
*(.dynamic)
*(.gnu.version_d)
_erodata = ABSOLUTE(.);
/* Literals are also RO data. */
_lit4_start = ABSOLUTE(.);
*(*.lit4)
*(.lit4.*)
*(.gnu.linkonce.lit4.*)
_lit4_end = ABSOLUTE(.);
. = ALIGN(4);
} >default_rodata_seg
/* Marks the end of IRAM code segment */
.iram0.text_end (NOLOAD) :
{
. = ALIGN (16);
} >iram0_0_seg
.iram0.data :
{
. = ALIGN(16);
*(.iram.data)
*(.iram.data*)
} >iram0_0_seg
.iram0.bss (NOLOAD) :
{
. = ALIGN(16);
*(.iram.bss)
*(.iram.bss*)
. = ALIGN(16);
_iram_end = ABSOLUTE(.);
} >iram0_0_seg
/* RTC fast memory holds RTC wake stub code !*/
.rtc.text :
{
. = ALIGN(4);
*(.rtc.literal .rtc.text)
} >rtc_iram_seg
/* This section is required to skip rtc.text area because the text and
* data segments reflect the same address space on different buses.
*/
.rtc.dummy :
{
. = SIZEOF(.rtc.text);
} >rtc_iram_seg
/* RTC data section holds RTC wake stub data/rodata. */
.rtc.data :
{
*(.rtc.data)
*(.rtc.rodata)
} >rtc_iram_seg
}