nuttx/boards/arm/tiva/lm3s6432-s2e/src/lm3s6432-s2e.h
Petro Karashchenko 8d3bf05fd2 include: fix double include pre-processor guards
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-16 11:11:14 -03:00

110 lines
4.0 KiB
C

/****************************************************************************
* boards/arm/tiva/lm3s6432-s2e/src/lm3s6432-s2e.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_TIVA_LM3S6432_S2E_SRC_LM3S6432_S2E_H
#define __BOARDS_ARM_TIVA_LM3S6432_S2E_SRC_LM3S6432_S2E_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include "chip.h"
#include "tiva_gpio.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* How many SSI modules does this chip support?
* The LM3S6432 supports 1 SSI module
* (others may support more than 2 -- in such case, the following must be
* expanded).
*/
#if TIVA_NSSI == 0
# undef CONFIG_TIVA_SSI0
#endif
#undef CONFIG_TIVA_SSI1
/* LM3S6432 MDL-S2E *********************************************************/
/* GPIO Usage
*
* PIN SIGNAL S2E Function
* --- ----------------- ---------------------------------------
* L3 PA0/U0RX Virtual COM port receive
* M3 PA1/U0TX Virtual COM port transmit
* E12 PB0/U0CTS Virtual COM port CTS
* D12 PB1/U0RTS Virtual COM port RTS
* L5 PA4/SPIRX SPI receive
* M5 PA5/SPITX SPI transmit
* H2 PD2/U1RX Virtual COM port receive
* H1 PD3/U1TX Virtual COM port transmit
* L4 PA3/U1CTS/SPICLK Virtual COM port CTS
* M4 PA2/U1RTS/SPISEL Virtual COM port RTS
* J11 PF0/LED1 Ethernet LED1 (green)
* J12 PF1/LED0 Ethernet LED0 (yellow)
* C11 PB2 Transceiver #INVALID
* C12 PB3 Transceiver #ENABLE
* A6 PB4 Transceiver ON
* B7 PB5 Transceiver #OFF
*/
/* GPIO for LEDs:
* - PF0: User LED
*/
#define LED1_GPIO (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE | GPIO_PORTF | 2)
#define LED0_GPIO (GPIO_FUNC_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORTF | 3)
/* GPIO for SSI0 select
*/
#define SSICS_GPIO (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE | GPIO_PORTA | 3)
/* GPIOs for the RS-232 transceiver enable/disable.
* Default state for these enables the transceiver.
*/
#define XCVR_INV_GPIO (GPIO_FUNC_INPUT | GPIO_PORTB | 2)
#define XCVR_ENA_GPIO (GPIO_FUNC_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORTB | 3)
#define XCVR_ON_GPIO (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE | GPIO_PORTB | 4)
#define XCVR_OFF_GPIO (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE | GPIO_PORTB | 5)
/****************************************************************************
* Public Functions Definitions
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Name: lm_ssidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the MDL-S2E.
*
****************************************************************************/
void weak_function lm_ssidev_initialize(void);
#endif /* __ASSEMBLY__ */
#endif /* __BOARDS_ARM_TIVA_LM3S6432_S2E_SRC_LM3S6432_S2E_H */