nuttx

History

Gregory Nutt bbbe9d85c5 Move EXIDX assignments inside of braces so that we can be assure that the symbols have the correct alignment. Suggested by Daniel P. Volpato Squashed commit of the following: Some scripts use TABs, others spaced. Make usage consistent. Move __exidx_end assignment inside of brackets. Remove old __exidx_end assignment. Move __exidx_start assignment inside of brackets. Remove old __exidx_start assignment		2019-09-12 09:57:50 -06:00
..
configs/usbnsh
include
scripts	Move EXIDX assignments inside of braces so that we can be assure that the symbols have the correct alignment. Suggested by Daniel P. Volpato	2019-09-12 09:57:50 -06:00
src	Fix typos in comments.	2019-08-21 09:32:59 -06:00
Kconfig
README.txt

README.txt

README
======

The NuttX configuration for the Olimex STM32-H405 is based on the configuration
Olimex STM32-P207.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults
to '/dev/console' which makes problems with the shell over USB.

The following peripherals are enabled in this configuration.
 - LED:        Shows the system status

 - Button:     Built in app 'buttons' works.

 - ADC:        ADC1 samples ADC_IN1. Built in app 'adc' works.

 - USB-FS-OTG: The console is running on the virtual serial port. Note that you
               have to press enter three times until NSH appears.

 - CAN:        Built in app 'can' is enabled but not tested, since no CAN transceiver
               is on board.