| .. |
|
chip
|
arch/arm/src/stm32f7: Fix an error introduced by the patch by Evgeniy Bobkov in Issue #114. That patch brok all STM32 F7 builds.
|
2018-08-03 14:26:29 -06:00 |
|
chip.h
|
arch/: Clean up some naming and spacing.
|
2018-06-20 15:38:06 -06:00 |
|
Kconfig
|
arch/arm/src/stm32f7: Port Bob Feritich's change (2c699d7812) to SDMMC2 and to all other STM32F7 architectures. Also add a conifiguration option to automatically enable I/O compensation.
|
2018-07-15 16:17:41 -06:00 |
|
Make.defs
|
This commit ports the stm32f20xxf40xx_flash.c driver to the STM32F7 platform and fixes some relevant problems in the header files.
|
2018-08-03 11:02:59 -06:00 |
|
stm32_adc.c
|
arch/srm/src/stm32f7: add PM hooks to ADC, I2C and SPI.
|
2018-03-06 08:10:50 -06:00 |
|
stm32_adc.h
|
STM32F7: warn if no DMA2 configured when using ADC with DMA. Also correct ADC channel numbers that DMA callback passes to upper half driver.
|
2017-04-18 06:49:51 -06:00 |
|
stm32_alarm.h
|
arch/srm/src/stm32f7: Add CONFIG_RTC_PERIODIC support. Also makes the RTC lowerhalf more like in STM32L4.
|
2018-03-05 07:46:58 -06:00 |
|
stm32_allocateheap.c
|
STM32F7: Some STM32F7 builds failed in build testing due to undefined STM32_SRAM1_BASE. I think that is because stm32_allocateheap.c was not including chip/stm32_memorymap.h
|
2017-08-13 06:50:48 -06:00 |
|
stm32_bbsram.c
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_bbsram.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_capture.c
|
Oops. Forgot to add files that go with the previous commit.
|
2018-06-21 07:15:35 -06:00 |
|
stm32_capture.h
|
Oops. Forgot to add files that go with the previous commit.
|
2018-06-21 07:15:35 -06:00 |
|
stm32_config.h
|
|
|
|
stm32_dbgmcu.h
|
|
|
|
stm32_dma2d.c
|
drivers/Kconfig: Global configuration variable CONFIG_FB_TRANSPARENCY is only defined in architecture-specific Kconfig files and then multiple times. Add the single global definition in drivers/Kconfig. arch/arm/src/stm32, stm32f7, and same5: Rename the architecture-specific variables appropriately. Selecting the architecture-specific version will also select the global version.
|
2018-06-28 12:31:51 -06:00 |
|
stm32_dma2d.h
|
drivers/Kconfig: Global configuration variable CONFIG_FB_CMAP is only defined in architecture-specific Kconfig files and then multiple times. Add the single global definition in drivers/Kconfig. arch/arm/src/stm32 and stm32f7: Rename the architecture-specific variables appropriately. Selecting the architecture-specific version will also select the global version.
|
2018-06-28 12:01:55 -06:00 |
|
stm32_dma.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_dma.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_dtcm.c
|
|
|
|
stm32_dtcm.h
|
STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722.
|
2017-11-18 07:55:50 -06:00 |
|
stm32_dumpgpio.c
|
STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722.
|
2017-11-18 07:55:50 -06:00 |
|
stm32_ethernet.c
|
This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE.
|
2018-07-04 14:10:40 -06:00 |
|
stm32_ethernet.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_exti_alarm.c
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_exti_gpio.c
|
STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722.
|
2017-11-18 07:55:50 -06:00 |
|
stm32_exti_pwr.c
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_exti_pwr.h
|
Standardization of some function headers.
|
2018-03-13 09:52:27 -06:00 |
|
stm32_exti_wakeup.c
|
drivers/power: add pm_unregister
|
2018-03-06 07:59:17 -06:00 |
|
stm32_exti.h
|
arch/srm/src/stm32f7: Add CONFIG_RTC_PERIODIC support. Also makes the RTC lowerhalf more like in STM32L4.
|
2018-03-05 07:46:58 -06:00 |
|
stm32_flash.c
|
This commit ports the stm32f20xxf40xx_flash.c driver to the STM32F7 platform and fixes some relevant problems in the header files.
|
2018-08-03 11:02:59 -06:00 |
|
stm32_fmc.h
|
Merged in plwm/nuttx/stm32f746g-disco-sdram (pull request #665)
|
2018-07-02 23:49:55 +00:00 |
|
stm32_gpio.c
|
arch/arm/src/stm32fy: IO compensation is non longer an inline function, just a plain callable function. Not really necessary for the F7, but now the implementation is identical to the F2 and F4.
|
2018-07-16 09:50:10 -06:00 |
|
stm32_gpio.h
|
arch/arm/src/stm32fy: IO compensation is non longer an inline function, just a plain callable function. Not really necessary for the F7, but now the implementation is identical to the F2 and F4.
|
2018-07-16 09:50:10 -06:00 |
|
stm32_i2c.c
|
include/nuttx/i2c/i2c_master.h: Rename I2C_M_NORESTART to I2C_M_NOSTART since it may be used in other contexts than a repeated start. Add comments to clarilfy setup for repeated start.
|
2018-08-03 08:51:55 -06:00 |
|
stm32_i2c.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_irq.c
|
arch/: Clean up some naming and spacing.
|
2018-06-20 15:38:06 -06:00 |
|
stm32_lowputc.c
|
|
|
|
stm32_lowputc.h
|
|
|
|
stm32_lse.c
|
STM32F7: add support for LSE RTC and enable RTC subseconds
|
2017-03-31 10:13:40 -06:00 |
|
stm32_lsi.c
|
STM32F7: add support for LSE RTC and enable RTC subseconds
|
2017-03-31 10:13:40 -06:00 |
|
stm32_ltdc.c
|
Fix lots of typos in C comments and Kconfig help text
|
2018-07-08 18:24:45 -06:00 |
|
stm32_ltdc.h
|
arch/arm/src/stm32 and stm32f7: Make LTDC and DMA2D drivers as similar as possible. Basically they should only differ in the configuratin naming: CONFIG_STM32F7_ vs CONFIG_STM32_. I suspect that the STM32F7 may also require some cache operations with the WRITE_BACK data cache is enabled.
|
2018-06-15 15:10:19 -06:00 |
|
stm32_mpuinit.c
|
|
|
|
stm32_mpuinit.h
|
|
|
|
stm32_otg.h
|
|
|
|
stm32_otgdev.c
|
Various fixes for errors ound while debugging OTG on L496
|
2017-11-21 06:32:53 -06:00 |
|
stm32_otghost.c
|
drivers/usbhost/usbhost_max3421e.c: Fix an error in reading the pending interrupts. Aos fix a number of typos and update a README.
|
2018-07-29 15:06:44 -06:00 |
|
stm32_procfs_dtcm.c
|
|
|
|
stm32_pwr.c
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_pwr.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_rcc.c
|
arch/arm/src/stm32fy: IO compensation is non longer an inline function, just a plain callable function. Not really necessary for the F7, but now the implementation is identical to the F2 and F4.
|
2018-07-16 09:50:10 -06:00 |
|
stm32_rcc.h
|
stm32_rcc: code style
|
2017-08-01 16:25:19 +02:00 |
|
stm32_rng.c
|
Squashed commit of the following:
|
2017-10-04 15:22:27 -06:00 |
|
stm32_rtc_lowerhalf.c
|
arch/arm/src: Change ASSERT macros to DEBUGASSERT.
|
2018-06-06 06:34:14 -06:00 |
|
stm32_rtc.c
|
arch/arm/src: Change ASSERT macros to DEBUGASSERT.
|
2018-06-06 06:34:14 -06:00 |
|
stm32_rtc.h
|
arch/arm/src/stm32,stm32l4,stm32f7: Fix duplicated configuration options. All should be unique.
|
2018-06-27 10:20:14 -06:00 |
|
stm32_sdmmc.c
|
arch/arm/src/stm32f7/: Fix data timeout errors with multiblock transfers.
|
2018-07-20 09:52:32 -06:00 |
|
stm32_sdmmc.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_serial.c
|
arch/arm/src/stm32, stm32f0, stm32f7, stm32: Correct naming of global variables that violations the naming requirements of the coding standard.
|
2018-07-12 10:54:51 -06:00 |
|
stm32_spi.c
|
arch/srm/src/stm32f7: add PM hooks to ADC, I2C and SPI.
|
2018-03-06 08:10:50 -06:00 |
|
stm32_spi.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_start.c
|
Squashed commit of the following:
|
2018-06-20 12:30:37 -06:00 |
|
stm32_start.h
|
|
|
|
stm32_tim.c
|
Add argument to timer irq callback
|
2017-03-01 08:49:14 -06:00 |
|
stm32_tim.h
|
Make sure that labeling is used consistently in all function headers.
|
2018-02-01 10:00:02 -06:00 |
|
stm32_timerisr.c
|
irq_dispatch: Add argument pointer to irq_dispatch
|
2017-02-27 06:27:56 -06:00 |
|
stm32_uart.h
|
stm32f7: serial: add interface to get uart_dev_t by USART number, stm32_serial_get_uart
|
2017-04-06 08:41:41 -06:00 |
|
stm32_usbhost.h
|
STM32F7: Remove unsupported configuration item the crept in when header file was cloned.
|
2017-08-13 12:37:59 -06:00 |
|
stm32_userspace.c
|
|
|
|
stm32_userspace.h
|
|
|
|
stm32f72xx73xx_rcc.c
|
Replicate Jussi Kivilinna's change for the newly added STM32F2xx and F3xx family members. This change allows selecting voltage output scale mode and enable over-drive only when needed.
|
2017-11-21 06:44:19 -06:00 |
|
stm32f74xx75xx_rcc.c
|
Squashed commit of the following:
|
2018-05-15 17:08:20 -06:00 |
|
stm32f76xx77xx_rcc.c
|
Squashed commit of the following:
|
2018-05-15 17:08:20 -06:00 |
