nuttx/libs/libc/pthread/pthread_spinlock.c
2022-07-08 02:15:54 +08:00

327 lines
10 KiB
C

/****************************************************************************
* libs/libc/pthread/pthread_spinlock.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <sys/boardctl.h>
#include <nuttx/spinlock.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <pthread.h>
#include <sched.h>
#include <assert.h>
#include <errno.h>
#ifdef CONFIG_PTHREAD_SPINLOCKS
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define IMPOSSIBLE_THREAD ((pthread_t)-1)
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: pthread_spin_init
*
* Description:
* The pthread_spin_init() function will allocate any resources required
* to use the spin lock referenced by lock and initialize the lock to an
* unlocked state.
*
* The results are undefined if pthread_spin_init() is called specifying
* an already initialized spin lock. The results are undefined if a spin
* lock is used without first being initialized.
*
* If the pthread_spin_init() function fails, the lock is not initialized
* and the contents of lock are undefined.
*
* Only the object referenced by lock may be used for performing
* synchronization. The result of referring to copies of that object in
* calls to pthread_spin_destroy(), pthread_spin_lock(),
* pthread_spin_trylock(), or pthread_spin_unlock() is undefined.
*
* Input Parameters:
* lock - A reference to the spinlock object to be initialized.
* pshared - Unused
*
* Returned Value:
* Zero (OK) is returned if a valid lock value is provided.
*
* POSIX Compatibility:
* Not supported: "If the Thread Process-Shared Synchronization option is
* supported and the value of pshared is PTHREAD_PROCESS_SHARED, the
* implementation shall permit the spin lock to be operated upon by any
* thread that has access to the memory where the spin lock is allocated,
* even if it is allocated in memory that is shared by multiple
* processes."
*
****************************************************************************/
int pthread_spin_init(FAR pthread_spinlock_t *lock, int pshared)
{
int ret = EINVAL;
DEBUGASSERT(lock != NULL);
if (lock != NULL)
{
lock->sp_lock = SP_UNLOCKED;
lock->sp_holder = IMPOSSIBLE_THREAD;
ret = OK;
}
return ret;
}
/****************************************************************************
* Name: pthread_spin_destroy
*
* Description:
* The pthread_spin_destroy() function will destroy the spin lock
* referenced by lock and release any resources used by the lock. The
* effect of subsequent use of the lock is undefined until the lock is
* reinitialized by another call to pthread_spin_init(). The results are
* undefined if pthread_spin_destroy() is called when a thread holds the
* lock, or if this function is called with an uninitialized thread spin
* lock.
*
* Input Parameters:
* lock - A reference to the spinlock object to be initialized.
* pshared - Unused
*
* Returned Value:
* Zero (OK) is always returned.
*
* POSIX Compatibility:
* Not supported: "If the Thread Process-Shared Synchronization option is
* supported and the value of pshared is PTHREAD_PROCESS_SHARED, the
* implementation shall permit the spin lock to be operated upon by any
* thread that has access to the memory where the spin lock is allocated,
* even if it is allocated in memory that is shared by multiple
* processes."
*
****************************************************************************/
int pthread_spin_destroy(pthread_spinlock_t *lock)
{
return OK;
}
/****************************************************************************
* Name: pthread_spin_lock
*
* Description:
* The pthread_spin_lock() function will lock the spin lock referenced by
* lock. The calling thread will acquire the lock if it is not held by
* another thread. Otherwise, the thread will spin (that is, will not
* return from the pthread_spin_lock() call) until the lock becomes
* available.
*
* If it is determined the value specified by the lock argument to
* pthread_spin_lock() refers to a spin lock object for which the calling
* thread already holds the lock, it is recommended that the function will
* fail and report an EDEADLK error.
*
* Input Parameters:
* lock - A reference to the spinlock object to lock.
*
* Returned Value:
* Zero is returned if the lock was successfully acquired. Otherwise one
* of the following errno values are returned:
*
* EINVAL - 'lock' does not refer to a valid spinlock object
* EDEADLOCK - The caller already holds the spinlock
*
****************************************************************************/
int pthread_spin_lock(pthread_spinlock_t *lock)
{
pthread_t me = pthread_self();
int ret;
DEBUGASSERT(lock != NULL);
if (lock == NULL)
{
return EINVAL;
}
else if (lock->sp_holder == me)
{
return EDEADLOCK;
}
/* Loop until we successfully take the spinlock (i.e., until the previous
* state of the spinlock was SP_UNLOCKED).
* NOTE that the test/set operation is performed via boardctl() to avoid a
* variety of issues. An option might be to move the implementation of
* up_testset() to libs/libc/machine.
*/
do
{
#ifdef CONFIG_BUILD_FLAT
ret = up_testset(&lock->sp_lock) == SP_LOCKED ? 1 : 0;
#else
ret = boardctl(BOARDIOC_TESTSET, (uintptr_t)&lock->sp_lock);
#endif
}
while (ret == 1);
/* Check for success (previous state was SP_UNLOCKED) */
if (ret == 0)
{
lock->sp_holder = me;
}
else
{
/* An error of some kind is the only other possibility */
DEBUGASSERT(ret < 0);
ret = -ret;
}
return ret;
}
/****************************************************************************
* Name: pthread_spin_trylock
*
* Description:
* The pthread_spin_trylock() function will lock the spin lock referenced
* by lock. The calling thread will acquire the lock if it is not held by
* another thread. Otherwise, The pthread_spin_trylock() will return a
* failure.
*
* Input Parameters:
* lock - A reference to the spinlock object to lock.
*
* Returned Value:
* Zero is returned if the lock was successfully acquired. Otherwise one
* of the following errno values are returned:
*
* EINVAL - 'lock' does not refer to a valid spinlock object
* EBUSY - The spinlock is held by another thread
*
****************************************************************************/
int pthread_spin_trylock(pthread_spinlock_t *lock)
{
pthread_t me = pthread_self();
int ret;
DEBUGASSERT(lock != NULL);
if (lock == NULL)
{
ret = EINVAL;
}
else if (lock->sp_holder == me)
{
ret = OK;
}
else
{
/* Perform the test/set operation via boardctl() */
ret = boardctl(BOARDIOC_TESTSET, (uintptr_t)&lock->sp_lock);
switch (ret)
{
case 0: /* Previously unlocked. We hold the spinlock */
lock->sp_holder = me;
break;
case 1: /* Previously locked. We did not get the spinlock */
ret = EBUSY;
break;
default:
DEBUGASSERT(ret < 0);
ret = -ret;
break;
}
}
return ret;
}
/****************************************************************************
* Name: pthread_spin_unlock
*
* Description:
* The pthread_spin_unlock() function will release the spin lock
* referenced by lock which was locked via the pthread_spin_lock() or
* pthread_spin_trylock() functions.
*
* The results are undefined if the lock is not held by the calling thread.
*
* If there are threads spinning on the lock when pthread_spin_unlock() is
* called, the lock becomes available and an unspecified spinning thread
* will acquire the lock.
*
* The results are undefined if this function is called with an
* uninitialized thread spin lock.
*
* Input Parameters:
* lock - A reference to the spinlock object to unlock.
*
* Returned Value:
* Zero is returned if the lock was successfully released. Otherwise one
* of the following errno values are returned:
*
* EINVAL - 'lock' does not refer to a valid spinlock object
* EPERM - The caller does not hold the spinlock or it is not locked
*
****************************************************************************/
int pthread_spin_unlock(pthread_spinlock_t *lock)
{
pthread_t me = pthread_self();
DEBUGASSERT(lock != NULL &&
lock->sp_lock == SP_LOCKED &&
lock->sp_holder == me);
if (lock == NULL)
{
return EINVAL;
}
else if (lock->sp_lock != SP_LOCKED || lock->sp_holder != me)
{
return EPERM;
}
/* Release the lock */
lock->sp_holder = IMPOSSIBLE_THREAD;
lock->sp_lock = SP_UNLOCKED;
return OK;
}
#endif /* CONFIG_PTHREAD_SPINLOCKS */