72355878ec
It’s an RP2040 based device with some interesting features: + small form factor (18x21.3mm) + 8 MByte Flash + RGB LED + Reset Button + USB-C - reduced pin-header Support in derived from: boards/arm/rp2040/raspberrypi-pico Location: boards/arm/rp2040/pimoroni-tiny2040
66 lines
1.5 KiB
Plaintext
66 lines
1.5 KiB
Plaintext
#
|
|
# For a description of the syntax of this configuration file,
|
|
# see the file kconfig-language.txt in the NuttX tools repository.
|
|
#
|
|
|
|
if ARCH_BOARD_PIMORONI_TINY2040
|
|
|
|
config RP2040_FLASH_BOOT
|
|
bool "flash boot"
|
|
default y
|
|
---help---
|
|
If y, the built binary can be used for flash boot.
|
|
If not, the binary is for SRAM boot.
|
|
|
|
config RP2040_FLASH_CHIP
|
|
string "flash chip name"
|
|
default "w25q080"
|
|
---help---
|
|
Name of NOR flash device connected to RP2040 SoC.
|
|
(Used to choose the secondary boot loader.)
|
|
Basically this option should not be changed.
|
|
|
|
config RP2040_UF2_BINARY
|
|
bool "uf2 binary format"
|
|
default y
|
|
---help---
|
|
Create nuttx.uf2 binary format used on RP2040 based arch.
|
|
|
|
config RP2040_UART0_GPIO
|
|
int "UART0 GPIO pin assign (0,12,16,28 or -1:no assign)"
|
|
default 0
|
|
range -1 29
|
|
depends on RP2040_UART0
|
|
|
|
config RP2040_UART1_GPIO
|
|
int "UART1 GPIO pin assign (4,8,20,24 or -1:no assign)"
|
|
default -1
|
|
range -1 29
|
|
depends on RP2040_UART1
|
|
|
|
config RP2040_I2C0_GPIO
|
|
int "I2C0 GPIO pin assign (0,4,8,12,16,20,24,28 or -1:no assign)"
|
|
default -1
|
|
range -1 29
|
|
depends on RP2040_I2C0
|
|
|
|
config RP2040_I2C1_GPIO
|
|
int "I2C1 GPIO pin assign (2,6,10,14,18,22,26 or -1:no assign)"
|
|
default -1
|
|
range -1 29
|
|
depends on RP2040_I2C1
|
|
|
|
config RP2040_SPI0_GPIO
|
|
int "SPI0 GPIO pin assign (0,4,16,20 or -1:no assign)"
|
|
default -1
|
|
range -1 29
|
|
depends on RP2040_SPI0
|
|
|
|
config RP2040_SPI1_GPIO
|
|
int "SPI1 GPIO pin assign (8,12,24,28 or -1:no assign)"
|
|
default -1
|
|
range -1 29
|
|
depends on RP2040_SPI1
|
|
|
|
endif
|