8ce1f1a67b
Port STM32F7 I2C to STM32F3 and STM32F0L0 arch/arm/src/stm32: port I2C IPv2 driver from F7 (only F3 chips) arch/arm/src/stm32f0l0: port I2C IPv2 driver from F7 configs/b-l072z-lrwan1: nxlines_oled example (ssd1306) configs/b-l072z-lrwan1: support for the I2C tool configs/nucleo-f303ze: nxlines_oled example (ssd1306) arch/arm/src/stm32h7/chip.h: cosmetics arch/arm/src/stm32/chip/stm32_tim.h: cosmetics Approved-by: Gregory Nutt <gnutt@nuttx.org>
219 lines
8.5 KiB
C
219 lines
8.5 KiB
C
/****************************************************************************
|
|
* configs/nucleo-f303ze/include/board.h
|
|
* include/arch/board/board.h
|
|
*
|
|
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
|
|
* Author: Mateusz Szafoni <raiden00@railab.me>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __CONFIG_NUCLEOF303ZE_INCLUDE_BOARD_H
|
|
#define __CONFIG_NUCLEOF303ZE_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
# include <stdbool.h>
|
|
#endif
|
|
|
|
#ifdef __KERNEL__
|
|
# include "stm32.h"
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* HSI - Internal 8 MHz RC Oscillator
|
|
* LSI - 32 KHz RC
|
|
* HSE - 8 MHz from MCO output of ST-LINK
|
|
* LSE - 32.768 kHz
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 8000000ul /* X1 on board */
|
|
|
|
#define STM32_HSEBYP_ENABLE
|
|
#define STM32_HSI_FREQUENCY 8000000ul
|
|
#define STM32_LSI_FREQUENCY 40000 /* Between 30kHz and 60kHz */
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 32768 /* X2 on board */
|
|
|
|
/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is 8MHz (XTAL) x 9 = 72MHz */
|
|
|
|
#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC
|
|
#define STM32_CFGR_PLLXTPRE 0
|
|
#define STM32_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx9
|
|
#define STM32_PLL_FREQUENCY (9*STM32_BOARD_XTAL)
|
|
|
|
/* Use the PLL and set the SYSCLK source to be the PLL */
|
|
|
|
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
|
|
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
|
|
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
|
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
|
|
|
/* APB2 clock (PCLK2) is HCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
|
|
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 1 and 8, 15-17 */
|
|
|
|
/* APB2 timers 1 and 8, 15-17 will receive PCLK2. */
|
|
|
|
/* Timers driven from APB2 will be PCLK2 */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_TIM15_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_TIM16_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB1_TIM17_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* APB1 timers 2-7 will be twice PCLK1 */
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* USB divider -- Divide PLL clock by 1.5 */
|
|
|
|
#define STM32_CFGR_USBPRE 0
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
|
* otherwise frequency is 2xAPBx.
|
|
* Note: TIM1,8 are on APB2, others on APB1
|
|
*/
|
|
|
|
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM2_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM3_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM4_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM5_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM6_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM7_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
/* LED definitions **********************************************************/
|
|
/* The Nucleo-144 board has numerous LEDs but only three, LD1 a Green LED, LD2 a Blue
|
|
* LED and LD3 a Red LED, that can be controlled by software. The following
|
|
* definitions assume the default Solder Bridges are installed.
|
|
*
|
|
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
|
|
* The following definitions are used to access individual LEDs.
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0
|
|
#define BOARD_LED2 1
|
|
#define BOARD_LED3 2
|
|
#define BOARD_NLEDS 3
|
|
|
|
#define BOARD_LED_GREEN BOARD_LED1
|
|
#define BOARD_LED_BLUE BOARD_LED2
|
|
#define BOARD_LED_RED BOARD_LED3
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
|
#define BOARD_LED3_BIT (1 << BOARD_LED3)
|
|
|
|
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
|
|
* include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
|
|
* events as follows:
|
|
*
|
|
*
|
|
* SYMBOL Meaning LED state
|
|
* Red Green Blue
|
|
* ---------------------- -------------------------- ------ ------ ----*/
|
|
|
|
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
|
|
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */
|
|
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
|
|
#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */
|
|
#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */
|
|
#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */
|
|
#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */
|
|
#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */
|
|
#define LED_IDLE 8 /* MCU is is sleep mode ON OFF OFF */
|
|
|
|
/* Button definitions *******************************************************/
|
|
/* The NUCLEO board supports one button: Pushbutton B1, labeled "User", is
|
|
* connected to GPIO PC13. A high value will be sensed when the button is depressed.
|
|
*/
|
|
|
|
#define BUTTON_USER 0
|
|
#define NUM_BUTTONS 1
|
|
|
|
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
|
|
|
/* Alternate function pin selections ****************************************/
|
|
/* USART3 (Nucleo Virtual Console) */
|
|
|
|
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
|
|
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
|
|
|
|
/* I2C1 Use Nucleo I2C1 pins */
|
|
|
|
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_3 /* PB8 - D15 */
|
|
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_3 /* PB9 - D14 */
|
|
|
|
/* I2C2 Use Nucleo I2C2 pins */
|
|
|
|
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_2 /* PF1 - D69 */
|
|
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_2 /* PF0 - D68 */
|
|
#define GPIO_I2C2_SMBA GPIO_I2C2_SMBA_2 /* PF2 - D70 */
|
|
|
|
/* DMA **********************************************************************/
|
|
|
|
#define ADC1_DMA_CHAN DMACHAN_ADC1
|
|
#define ADC3_DMA_CHAN DMACHAN_ADC3
|
|
|
|
#endif /* __CONFIG_NUCLEO_F303ZE_INCLUDE_BOARD_H */
|