Sebastien Lorquet ed50b14cee drivers/net/phy_notify.c: Use phy debug macros instead of net debug macros. ninfo() and nerr() are used a bit too much, so the console output is difficult to read with network debug.

2018-03-09 07:11:07 -06:00

..

dm90x0.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00

enc28j60.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00

enc28j60.h

…

encx24j600.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00

encx24j600.h

…

ftmac100.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00

Kconfig

drivers/net: Add support for telnet character mode

2018-01-09 20:19:26 +09:00

loopback.c

This comment converts the underlying IPC used by the UserFS from Unix domain local sockets to UDP LocalHost loopback sockets. The problem with the local sockets is that they do require operations on the top level psuedo-file system inode tree. That tree must be locked during certain traversals such as enumerate mountpoints or enumerating directory entries.

2017-11-05 12:25:58 -06:00

Make.defs

drivers/net: Remove the old, unfinished Crystal LAN driver. I don't even have the hardware that it goes with anymore.

2017-10-28 10:27:00 -06:00

phy_notify.c

drivers/net/phy_notify.c: Use phy debug macros instead of net debug macros. ninfo() and nerr() are used a bit too much, so the console output is difficult to read with network debug.

2018-03-09 07:11:07 -06:00

skeleton.c

arch/arm/src/lpc54xx: Add some hooks for future 802.1q VLAN support. configs/lpcxpresso-lpc54628: Automatically bring up network in the netnsh configuration.

2018-01-02 08:49:09 -06:00

slip.c

Squashed commit of the following:

2018-01-31 16:11:54 -06:00

telnet.c

Merged in hardlulz/modem-3.0-nuttx/fix-sem-EINTR (pull request #603)

2018-02-20 18:24:53 +00:00

tun.c

The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.

2018-01-22 08:17:45 -06:00