Gregory Nutt 23147c40a5 Remove final traces of the 8015 from the NuttX source tree

2014-09-01 13:21:15 -06:00

..

Makefile

SAMA5D3X-EK: Add support for the WM8904 audio CODEC

2014-07-31 11:14:57 -06:00

nor_main.c

Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled

2014-07-26 18:47:33 -06:00

sam_adc.c

Some cosmetic typo fixes

2014-07-09 07:12:16 -06:00

sam_at24.c

SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards

2014-03-30 07:26:38 -06:00

sam_at25.c

SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards

2014-03-30 07:26:38 -06:00

sam_autoleds.c

SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane.

2014-04-11 15:57:35 -06:00

sam_boot.c

SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected

2014-08-11 14:29:43 -06:00

sam_buttons.c

Fix some cloned errors in SAM GPIO interrupt setup

2014-07-07 15:54:37 -06:00

sam_can.c

Some cosmetic typo fixes

2014-07-09 07:12:16 -06:00

sam_cxxinitialize.c

SAMA5D3x-EK: Fix lots of typos in board name

2014-03-28 09:11:19 -06:00

sam_ethernet.c

Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires

2014-08-17 16:51:56 -06:00

sam_hsmci.c

SAMA5D3x-EK demo configuration now supports HSMCI0 and HSMCI1

2013-09-11 09:50:36 -06:00

sam_i2schar.c

SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards

2014-03-30 07:26:38 -06:00

sam_nandflash.c

SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards

2014-03-30 07:26:38 -06:00

sam_norflash.c

SAMA5: Add logic to initialize SAMA5D3x-EK on-board SDRAM

2013-08-01 16:58:55 -06:00

sam_nsh.c

SAMA5D3X-EK: Add support for the WM8904 audio CODEC

2014-07-31 11:14:57 -06:00

sam_ostest.c

SAMA5: Add support for the FPU OS test

2013-09-18 10:35:03 -06:00

sam_ov2640.c

SAMA5 PCK: Add support for the slow clock as the PCK clock source

2014-07-19 13:55:08 -06:00

sam_pwm.c

SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards

2014-03-30 07:26:38 -06:00

sam_sdram.c

Updated SAMA5 SFR header file for the SAMA5D4

2014-06-08 07:48:36 -06:00

sam_spi.c

Some cosmetic typo fixes

2014-07-09 07:12:16 -06:00

sam_touchscreen.c

SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards

2014-03-30 07:26:38 -06:00

sam_usb.c

Remove final traces of the 8015 from the NuttX source tree

2014-09-01 13:21:15 -06:00

sam_usbmsc.c

Some cosmetic typo fixes

2014-07-09 07:12:16 -06:00

sam_userleds.c

SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane.

2014-04-11 15:57:35 -06:00

sam_wm8904.c

SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected

2014-08-11 14:29:43 -06:00

sama5d3x-ek.h

KSZ80x1 PHY interrupts are active low and should trigger on the falling edge

2014-08-17 13:15:59 -06:00