nuttx/mm/iob/iob_initialize.c
chao an e6b37f2b2d mm/iob: revert "modify iob to support header padding and alignment features"
we don't need to implement l2 isolation through io_head, iob offload will use io_offset

-------------------------------------------------------------
Layout of different NICs implementation:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                 io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
 Ethernet   |       Reserved    | ETH_HDRLEN |    io_len    |
            ---------------------------------|---------------
 8021Q      |   Reserved  | ETH_8021Q_HDRLEN |    io_len    |
            ---------------------------------|---------------
 ipforward  |            Reserved            |    io_len    |
            -------------------------------------------------

--------------------------------------------------------------------

Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-21 01:43:02 +08:00

159 lines
5.0 KiB
C

/****************************************************************************
* mm/iob/iob_initialize.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <nuttx/mm/iob.h>
#include "iob.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define ROUNDUP(x, y) (((x) + (y) - 1) / (y) * (y))
/* Fix the I/O Buffer size with specified alignment size */
#define IOB_ALIGN_SIZE ROUNDUP(sizeof(struct iob_s), CONFIG_IOB_ALIGNMENT)
#define IOB_BUFFER_SIZE (IOB_ALIGN_SIZE * CONFIG_IOB_NBUFFERS + \
CONFIG_IOB_ALIGNMENT - 1)
/****************************************************************************
* Private Data
****************************************************************************/
/* Following raw buffer will be divided into iob_s instances, the initial
* procedure will ensure that the member io_data of each iob_s is aligned
* to the CONFIG_IOB_ALIGNMENT memory boundary.
*/
#ifdef IOB_SECTION
static uint8_t g_iob_buffer[IOB_BUFFER_SIZE] locate_data(IOB_SECTION);
#else
static uint8_t g_iob_buffer[IOB_BUFFER_SIZE];
#endif
#if CONFIG_IOB_NCHAINS > 0
/* This is a pool of pre-allocated iob_qentry_s buffers */
static struct iob_qentry_s g_iob_qpool[CONFIG_IOB_NCHAINS];
#endif
/****************************************************************************
* Public Data
****************************************************************************/
/* A list of all free, unallocated I/O buffers */
FAR struct iob_s *g_iob_freelist;
/* A list of I/O buffers that are committed for allocation */
FAR struct iob_s *g_iob_committed;
#if CONFIG_IOB_NCHAINS > 0
/* A list of all free, unallocated I/O buffer queue containers */
FAR struct iob_qentry_s *g_iob_freeqlist;
/* A list of I/O buffer queue containers that are committed for allocation */
FAR struct iob_qentry_s *g_iob_qcommitted;
#endif
/* Counting semaphores that tracks the number of free IOBs/qentries */
sem_t g_iob_sem = SEM_INITIALIZER(CONFIG_IOB_NBUFFERS);
#if CONFIG_IOB_THROTTLE > 0
/* Counts available I/O buffers when throttled */
sem_t g_throttle_sem = SEM_INITIALIZER(CONFIG_IOB_NBUFFERS -
CONFIG_IOB_THROTTLE);
#endif
#if CONFIG_IOB_NCHAINS > 0
/* Counts free I/O buffer queue containers */
sem_t g_qentry_sem = SEM_INITIALIZER(CONFIG_IOB_NCHAINS);
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: iob_initialize
*
* Description:
* Set up the I/O buffers for normal operations.
*
****************************************************************************/
void iob_initialize(void)
{
int i;
uintptr_t buf;
/* Get a start address which plus offsetof(struct iob_s, io_data) is
* aligned to the CONFIG_IOB_ALIGNMENT memory boundary
*/
buf = ROUNDUP((uintptr_t)g_iob_buffer + offsetof(struct iob_s, io_data),
CONFIG_IOB_ALIGNMENT) - offsetof(struct iob_s, io_data);
/* Get I/O buffer instance from the start address and add each I/O buffer
* to the free list
*/
for (i = 0; i < CONFIG_IOB_NBUFFERS; i++)
{
FAR struct iob_s *iob = (FAR struct iob_s *)(buf + i * IOB_ALIGN_SIZE);
/* Add the pre-allocate I/O buffer to the head of the free list */
iob->io_flink = g_iob_freelist;
g_iob_freelist = iob;
}
#if CONFIG_IOB_NCHAINS > 0
/* Add each I/O buffer chain queue container to the free list */
for (i = 0; i < CONFIG_IOB_NCHAINS; i++)
{
FAR struct iob_qentry_s *iobq = &g_iob_qpool[i];
/* Add the pre-allocate buffer container to the head of the free
* list
*/
iobq->qe_flink = g_iob_freeqlist;
g_iob_freeqlist = iobq;
}
#endif
}