a1c991d921
Move boards to boards folder
* boards: rename configs folder to boards
This is the proposed layout after the change:
boards: - folder containing board folders
<board>: - name of each board
drivers: - extra drivers specific for platform
include: - header files for the boars
scripts: - extra scripts specific for platform
src: - board specific code
tools: - extra tools specific for platform
<config>: - board specific configuration(s)
Note:
<xxx> names are dependent on platform
This is a logical change to aim to the arch layout but this is a
huge change it should be done in several steps to lower the risk.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Kconfig: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile.*: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Make.defs: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .sh: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .mk: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .c & .h: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .bat: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
21 lines
769 B
Plaintext
21 lines
769 B
Plaintext
README
|
|
======
|
|
|
|
This README discusses issues unique to NuttX configurations for the
|
|
Axoloti open source synthesizer board featuring the STM32F427IGH6
|
|
MCU. The STM32F427IGH6 has a 180MHz Cortex-M4 core with 1MiB Flash
|
|
memory and 256KiB of SRAM. The board features:
|
|
|
|
- ADAU1961 24-bit 96 kHz stereo CODEC
|
|
- 1/4" in/out jacks for analog audio signals
|
|
- 3.5 mm jack for analog audio signals
|
|
- 8 MiB of SDRAM (Alliance Memory AS4C4M16SA)
|
|
- Serial MIDI in/out ports
|
|
- SD Card slot
|
|
- Two user LEDs and one (GPIO) push-button
|
|
- USB OTG FS with Micro-AB connector (USB device mode operation)
|
|
- USB OTG HS with Type-A connector (USB host mode operation)
|
|
- Easy access to most IO pins
|
|
|
|
Refer to http://www.axoloti.com/ for further information about this board.
|