a1c991d921
Move boards to boards folder
* boards: rename configs folder to boards
This is the proposed layout after the change:
boards: - folder containing board folders
<board>: - name of each board
drivers: - extra drivers specific for platform
include: - header files for the boars
scripts: - extra scripts specific for platform
src: - board specific code
tools: - extra tools specific for platform
<config>: - board specific configuration(s)
Note:
<xxx> names are dependent on platform
This is a logical change to aim to the arch layout but this is a
huge change it should be done in several steps to lower the risk.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Kconfig: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile.*: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Make.defs: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .sh: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .mk: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .c & .h: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .bat: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
94 lines
3.9 KiB
C
94 lines
3.9 KiB
C
/************************************************************************************
|
|
* boards/demo9s12ne64/include/board.h
|
|
* include/arch/board/board.h
|
|
*
|
|
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __ARCH_BOARD_BOARD_H
|
|
#define __ARCH_BOARD_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
/* Frequency of the crystal oscillator */
|
|
|
|
#define HCS12_OSCCLK 16000000 /* 16MHz */
|
|
|
|
/* PLL Settings
|
|
*
|
|
* SYNR register controls the multiplication factor of the PLL. If the PLL is on, the
|
|
* count in the loop divider (SYNR) register effectively multiplies up the PLL clock
|
|
* (PLLCLK) from the reference frequency by 2 x (SYNR+1). PLLCLK will not be below
|
|
* the minimum VCO frequency (fSCM).
|
|
*
|
|
* The REFDV register provides a finer granularity for the PLL multiplier steps. The
|
|
* count in the reference divider divides OSCCLK frequency by REFDV + 1.
|
|
*
|
|
* PLLCLK = 2 * OSCCLK * (SYNR + 1) / (REFDV + 1)
|
|
*
|
|
* If (PLLSEL = 1), Bus Clock = PLLCLK / 2
|
|
*/
|
|
|
|
#define HCS12_SYNR_VALUE 0x15
|
|
#define HCS12_REFDV_VALUE 0x15
|
|
#define HCS12_PLLCLK (2*HCS12_OSCCLK*(HCS12_SYNR+1)/(HCS12_REFDV+1))
|
|
#define HCS12_BUSCLK (HSC12_PLLCLK/2)
|
|
|
|
/* LED definitions ******************************************************************/
|
|
|
|
/* The DEMO9S12NE64 board has 2 LEDs that we will encode as: */
|
|
|
|
#define LED_STARTED 1 /* LED1 */
|
|
#define LED_HEAPALLOCATE 1 /* LED1 */
|
|
#define LED_IRQSENABLED 1 /* LED1 */
|
|
#define LED_STACKCREATED 1 /* LED1 */
|
|
#define LED_INIRQ 2 /* LED1 + LED2 */
|
|
#define LED_SIGNAL 2 /* LED1 + LED2 */
|
|
#define LED_ASSERTION 2 /* LED1 + LED2 */
|
|
#define LED_PANIC 7 /* LED2 + N/C */
|
|
|
|
/* Button definitions ***************************************************************/
|
|
|
|
#endif /* __ARCH_BOARD_BOARD_H */
|