a1c991d921
Move boards to boards folder
* boards: rename configs folder to boards
This is the proposed layout after the change:
boards: - folder containing board folders
<board>: - name of each board
drivers: - extra drivers specific for platform
include: - header files for the boars
scripts: - extra scripts specific for platform
src: - board specific code
tools: - extra tools specific for platform
<config>: - board specific configuration(s)
Note:
<xxx> names are dependent on platform
This is a logical change to aim to the arch layout but this is a
huge change it should be done in several steps to lower the risk.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Kconfig: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile.*: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Make.defs: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .sh: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .mk: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .c & .h: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .bat: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
256 lines
11 KiB
C
256 lines
11 KiB
C
/************************************************************************************
|
|
* boards/u-blox-c027/include/board.h
|
|
*
|
|
* Copyright (C) 2016 Vladimir Komendantskiy. All rights reserved.
|
|
* Author: Vladimir Komendantskiy <vladimir@moixaenergy.com>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __BOARDS_U_BLOX_C027_INCLUDE_BOARD_H
|
|
#define __BOARDS_U_BLOX_C027_INCLUDE_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
/* NOTE: The following definitions require lpc17_40_syscon.h. It is not included here
|
|
* because the including C file may not have that file in its include path.
|
|
*/
|
|
|
|
#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */
|
|
#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */
|
|
#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency */
|
|
#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
|
|
|
|
/* This is the clock setup we configure for:
|
|
*
|
|
* SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for source
|
|
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20, pre-divider=1
|
|
* CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6
|
|
*/
|
|
|
|
#define LPC17_40_CCLK 80000000 /* 80Mhz */
|
|
|
|
/* Select the main oscillator as the frequency source. SYSCLK is then the frequency
|
|
* of the main oscillator.
|
|
*/
|
|
|
|
#undef CONFIG_LPC17_40_MAINOSC
|
|
#define CONFIG_LPC17_40_MAINOSC 1
|
|
#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN
|
|
|
|
/* Select the main oscillator and CCLK divider. The output of the divider is CCLK.
|
|
* The input to the divider (PLLCLK) will be determined by the PLL output.
|
|
*/
|
|
|
|
#define BOARD_CCLKCFG_DIVIDER 6
|
|
#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
|
|
|
|
/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK).
|
|
*
|
|
* Source clock: Main oscillator
|
|
* PLL0 Multiplier value (M): 20
|
|
* PLL0 Pre-divider value (N): 1
|
|
*
|
|
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz
|
|
*/
|
|
|
|
#undef CONFIG_LPC17_40_PLL0
|
|
#define CONFIG_LPC17_40_PLL0 1
|
|
#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN
|
|
|
|
#define BOARD_PLL0CFG_MSEL 20
|
|
#define BOARD_PLL0CFG_NSEL 1
|
|
#define BOARD_PLL0CFG_VALUE \
|
|
(((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
|
|
((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
|
|
|
|
/* PLL1 -- Not used. */
|
|
|
|
#undef CONFIG_LPC17_40_PLL1
|
|
#define BOARD_PLL1CFG_MSEL 36
|
|
#define BOARD_PLL1CFG_NSEL 1
|
|
#define BOARD_PLL1CFG_VALUE \
|
|
(((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
|
|
((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
|
|
|
|
/* USB divider. This divider is used when PLL1 is not enabled to get the
|
|
* USB clock from PLL0:
|
|
*
|
|
* USBCLK = PLL0CLK / 10 = 48MHz
|
|
*/
|
|
|
|
#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10
|
|
|
|
/* FLASH Configuration */
|
|
|
|
#undef CONFIG_LPC17_40_FLASH
|
|
#define CONFIG_LPC17_40_FLASH 1
|
|
#define BOARD_FLASHCFG_VALUE 0x0000303a
|
|
|
|
/* Ethernet configuration */
|
|
|
|
#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV20
|
|
|
|
/* u-blox C027 board pin usage ***************************************************/
|
|
/* Pin Description Connector On Board
|
|
* -------------------------------- --------- --------------
|
|
* P0[0]/RD1/TXD3/SDA1 D14 TXD3/SDA1
|
|
* P0[1]/TD1/RXD3/SCL1 D15 RXD3/SCL1
|
|
* P0[2]/TXD0/AD0[7] USBTXD
|
|
* P0[3]/RXD0/AD0[6] USBRXD
|
|
* P0[4]/I2SRX-CLK/RD2/CAP2.0 CANRD CAN_RX2
|
|
* P0[5]/I2SRX-WS/TD2/CAP2.1 CANTD CAN_TX2
|
|
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] CANS SSEL1
|
|
* P0[7]/I2STX_CLK/SCK1/MAT2[1] MDMUSBDET
|
|
* P0[8]/I2STX_WS/MISO1/MAT2[2] MDMLVLOE
|
|
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] MDMILVLOE
|
|
* P0[10]/TXD2/SDA2 GPSTXD
|
|
* P0[11]/RXD2/SCL2 GPSRXD
|
|
* P0[15]/TXD1/SCK0/SCK MDMTXD
|
|
* P0[16]/RXD1/SSEL0/SSEL MDMRXD
|
|
* P0[17]/CTS1/MISO0/MISO MDMCTS
|
|
* P0[18]/DCD1/MOSI0/MOSI MDMDCD
|
|
* P0[19]/DSR1/SDA1 MDMDCR
|
|
* P0[20]/DTR1/SCL1 MDMDTR
|
|
* P0[21]/RI1/MCIPWR/RD1 MDMRI
|
|
* P0[22]/RTS1/TD1 MDMRTS
|
|
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] A0 I2S_CLK
|
|
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] A1 I2S_WS
|
|
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 A2 I2S_SDA
|
|
* P0[26]/AD0[3]/AOUT/RXD3 A3 AD0.3/AOUT
|
|
* P0[27]/SDA0/USB_SDA GPSSDA
|
|
* P0[28]/SCL0 GPSSCL
|
|
* P0[29]/USB_D+ MDMUSBDP
|
|
* P0[30]/USB_D- MDMUSBDM
|
|
*
|
|
* P1[0]/ENET_TXD0 ENET_TXD0
|
|
* P1[1]/ENET_TXD1 ENET_TXD1
|
|
* P1[4]/ENET_TX_EN ENET_TX_EN
|
|
* P1[8]/ENET_CRS ENET_CRS
|
|
* P1[9]/ENET_RXD0 ENET_RXD0
|
|
* P1[10]/ENET_RXD1 ENET_RXD1
|
|
* P1[14]/ENET_RX_ER ENET_RX_ER
|
|
* P1[15]/ENET_REF_CLK ENET_REF_CLK
|
|
* P1[16]/ENET_MDC ENET_MDC
|
|
* P1[17]/ENET_MDIO ENET_MDIO
|
|
* P1[18]/USB_UP_LED/PWM1[1]/CAP1[0] GPSRST
|
|
* P1[19]/MC0A/USB_PPWR/N_CAP1.1 GPSPPS
|
|
* P1[20]/MCFB0/PWM1.2/SCK0 D13 PWM1.2/SCK0
|
|
* P1[21]/MCABORT/PWM1.3/SSEL0 D10 PWM1.3/SSEL0
|
|
* P1[22]/MC0B/USB-PWRD/MAT1.0 GPSINT
|
|
* P1[23]/MCFB1/PWM1.4/MISO0 D12 PWM1.4/MISO0
|
|
* P1[24]/MCFB2/PWM1.5/MOSI0 D11 PWM1.5/MOSI0
|
|
* P1[25]/MC1A/MAT1.1 ETH_LED_LNK
|
|
* P1[26]/MC1B/PWM1.6/CAP0.0 ETH_LED_SPD
|
|
* P1[27]/CLKOUT/USB-OVRCR-N/CAP0.1 ETH_OSC_EN
|
|
* P1[28]/MC2A/PCAP1.0/MAT0.0 ETH_RST
|
|
* P1[29]/MC2B/PCAP1.1/MAT0.1 GPSEN
|
|
* P1[30]/VBUS/AD0[4] A4 AD0.4
|
|
* P1[31]/SCK1/AD0[5] A5 AD0.5
|
|
*
|
|
* P2[0]/PWM1.1/TXD1 D3 PWM1.1
|
|
* P2[1]/PWM1.2/RXD1 D5 PWM1.2
|
|
* P2[2]/PWM1.3/CTS1/TRACEDATA[3] D6 PWM1.3
|
|
* P2[3]/PWM1.4/DCD1/TRACEDATA[2] D9 PWM1.4
|
|
* P2[4]/PWM1.5/DSR1/TRACEDATA[1] D8 PWM1.5
|
|
* P2[5]/PWM1[6]/DTR1/TRACEDATA[0] MDMEN
|
|
* P2[6]/PCAP1[0]/RI1/TRACECLK MDMPWRON
|
|
* P2[7]/RD2/RTS1 MDMGPIO1
|
|
* P2[8]/TD2/TXD2 MDMRST
|
|
* P2[9]/USB_CONNECT/RXD2 MDMUSBCON
|
|
* P2[10]/EINT0/NMI ISP_PAD
|
|
* P2[11]/EINT1/I2STX_CLK D7 EINT1
|
|
* P2[12]/EINT2/I2STX_WS D4 EINT2
|
|
* P2[13]/EINT3/I2STX_SDA D2 EINT3
|
|
*
|
|
* P3[25]/MAT0.0/PWM1.2 LED
|
|
*
|
|
* P4[28]/RX-MCLK/MAT2.0/TXD3 D0 TXD3
|
|
* P4[29]/TX-MCLK/MAT2.1/RXD3 D1 RXD3
|
|
*/
|
|
|
|
/* LED definitions ******************************************************************/
|
|
/* The u-blox C027 board has a single red LED (there are additional LEDs on the
|
|
* base board not considered here).
|
|
*/
|
|
/* ON OFF */
|
|
#define LED_STARTED 0 /* OFF ON (never happens) */
|
|
#define LED_HEAPALLOCATE 0 /* OFF ON (never happens) */
|
|
#define LED_IRQSENABLED 0 /* OFF ON (never happens) */
|
|
#define LED_STACKCREATED 1 /* ON ON (never happens) */
|
|
#define LED_INIRQ 2 /* OFF NC (momentary) */
|
|
#define LED_SIGNAL 2 /* OFF NC (momentary) */
|
|
#define LED_ASSERTION 2 /* OFF NC (momentary) */
|
|
#define LED_PANIC 0 /* OFF ON (1Hz flashing) */
|
|
|
|
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1
|
|
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1
|
|
|
|
#define GPIO_SSP1_SCK GPIO_SSP1_SCK_1
|
|
#define GPIO_SSP0_SCK GPIO_SSP0_SCK_1
|
|
#define GPIO_SSP0_SSEL GPIO_SSP0_SSEL_1
|
|
#define GPIO_SSP0_MISO GPIO_SSP0_MISO_1
|
|
#define GPIO_SSP0_MOSI GPIO_SSP0_MOSI_1
|
|
|
|
#define GPIO_UART1_TXD GPIO_UART1_TXD_1
|
|
#define GPIO_UART1_RXD GPIO_UART1_RXD_1
|
|
#define GPIO_UART1_CTS GPIO_UART1_CTS_1
|
|
#define GPIO_UART1_RTS GPIO_UART1_RTS_1
|
|
#define GPIO_UART1_DCD GPIO_UART1_DCD_1
|
|
#define GPIO_UART1_DSR GPIO_UART1_DSR_1
|
|
#define GPIO_UART1_DTR GPIO_UART1_DTR_1
|
|
#define GPIO_UART1_RI GPIO_UART1_RI_1
|
|
|
|
#define GPIO_UART2_TXD GPIO_UART2_TXD_1
|
|
#define GPIO_UART2_RXD GPIO_UART2_RXD_1
|
|
|
|
#define GPIO_UART3_TXD GPIO_UART3_TXD_3
|
|
#define GPIO_UART3_RXD GPIO_UART3_RXD_3
|
|
|
|
#define GPIO_ENET_MDC GPIO_ENET_MDC_1
|
|
#define GPIO_ENET_MDIO GPIO_ENET_MDIO_1
|
|
|
|
#define GPIO_PWM1p1 GPIO_PWM1p1_2
|
|
#define GPIO_PWM1p2 GPIO_PWM1p2_2
|
|
#define GPIO_PWM1p3 GPIO_PWM1p3_2
|
|
#define GPIO_PWM1p4 GPIO_PWM1p4_2
|
|
#define GPIO_PWM1p5 GPIO_PWM1p5_2
|
|
#define GPIO_PWM1p6 GPIO_PWM1p6_2
|
|
|
|
#endif /* __BOARDS_U_BLOX_C027_INCLUDE_BOARD_H */
|