| .. |
|
a1x
|
Squashed commit of the following:
|
2018-06-21 10:59:58 -06:00 |
|
arm
|
Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch.
|
2018-11-15 07:11:51 -06:00 |
|
armv6-m
|
Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch.
|
2018-11-15 07:11:51 -06:00 |
|
armv7-a
|
Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch.
|
2018-11-15 07:11:51 -06:00 |
|
armv7-m
|
This commit adds a new function arch_invalidate_dcache_by_addr(). It takes the same parameters as arch_invalidate_dcache(), but performs invalidation of only the lines in cache that need to be invalidated. This new function could be used as a a direct replacement for arch_invalidate_dcache().
|
2018-11-20 14:03:42 -06:00 |
|
armv7-r
|
Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch.
|
2018-11-15 07:11:51 -06:00 |
|
bcm2708
|
EFM32, Kinetis, BCM2708: Juha Niskanen's fix of commit 4a32325e3c also applies to BCM2708, EFM32, and Kinetis.
|
2018-10-10 06:45:03 -06:00 |
|
c5471
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
common
|
arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support.
|
2018-11-20 08:09:03 -06:00 |
|
dm320
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
efm32
|
arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support.
|
2018-11-20 08:09:03 -06:00 |
|
imx1
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
imx6
|
Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115.
|
2018-08-05 10:48:02 -06:00 |
|
imxrt
|
arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support.
|
2018-11-20 08:09:03 -06:00 |
|
kinetis
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
kl
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
lc823450
|
arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support.
|
2018-11-20 08:09:03 -06:00 |
|
lpc11xx
|
Fix lots of typos in C comments and Kconfig help text
|
2018-07-08 18:24:45 -06:00 |
|
lpc17xx
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
lpc31xx
|
Replace non critical PANIC with DEBUGPANIC to save the code space
|
2018-08-24 06:21:15 -06:00 |
|
lpc43xx
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
lpc54xx
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
lpc214x
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
lpc2378
|
arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM
|
2018-05-07 10:13:20 -06:00 |
|
max326xx
|
arch/arm/src/max326xx: Add missing function to get the alarm time.
|
2018-11-21 15:06:02 -06:00 |
|
moxart
|
Squashed commit of the following:
|
2018-08-26 11:17:33 -06:00 |
|
nrf52
|
Squashed commit of the following:
|
2018-11-18 07:51:24 -06:00 |
|
nuc1xx
|
Fix lots of typos in C comments and Kconfig help text
|
2018-07-08 18:24:45 -06:00 |
|
sam34
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
sama5
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
samd2l2
|
arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support.
|
2018-11-20 08:09:03 -06:00 |
|
samd5e5
|
arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support.
|
2018-11-20 08:09:03 -06:00 |
|
samv7
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
stm32
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
stm32f0
|
stm32f0, stm32f7, stm32h7, stm32l4 serial: fix use of CONFIG_SERIAL_IFLOWCONTROL for CONFIG_SERIAL_OFLOWCONTROL
|
2018-10-10 06:29:29 -06:00 |
|
stm32f7
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
stm32h7
|
Merged in antmerlino/nuttx/spi-initialize (pull request #746)
|
2018-11-01 16:00:27 +00:00 |
|
stm32l4
|
arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support.
|
2018-11-20 08:09:03 -06:00 |
|
str71x
|
Replace non critical PANIC with DEBUGPANIC to save the code space
|
2018-08-24 06:21:15 -06:00 |
|
tiva
|
All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.
|
2018-11-21 07:57:26 -06:00 |
|
tms570
|
Replace all ASSERT with DEBUGASSERT to save the code space
|
2018-08-24 06:58:30 -06:00 |
|
xmc4
|
arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.
|
2018-09-21 21:32:50 -06:00 |
|
.gitignore
|
|
|
|
Makefile
|
Squashed commit of the following:
|
2018-06-20 12:30:37 -06:00 |
