sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
c8868b3745
nuttx/drivers/sensors/lis3dsh.c
Xiang Xiao dca5a3483f drivers: Destroy mutex and sem in the error path 
also correct the order to ensure the memory free is last step

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-17 15:59:46 +09:00

583 lines
18 KiB
C
Raw Blame History

/****************************************************************************
* drivers/sensors/lis3dsh.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <string.h>
#include <nuttx/kmalloc.h>
#include <nuttx/wqueue.h>
#include <nuttx/random.h>
#include <nuttx/fs/fs.h>
#include <nuttx/mutex.h>
#include <nuttx/sensors/lis3dsh.h>
#if defined(CONFIG_SPI) && defined(CONFIG_LIS3DSH)
/****************************************************************************
* Private
****************************************************************************/
struct lis3dsh_sensor_data_s
{
int16_t x_acc; /* Measurement result for x axis */
int16_t y_acc; /* Measurement result for y axis */
int16_t z_acc; /* Measurement result for z axis */
};
struct lis3dsh_dev_s
{
FAR struct lis3dsh_dev_s *flink; /* Supports a singly linked list of
* drivers */
FAR struct spi_dev_s *spi; /* Pointer to the SPI instance */
FAR struct lis3dsh_config_s *config; /* Pointer to the configuration
* of the LIS3DSH sensor */
mutex_t datalock; /* Manages exclusive access to this
* structure */
struct lis3dsh_sensor_data_s data; /* The data as measured by the sensor */
struct work_s work; /* The work queue is responsible for
* retrieving the data from the
* sensor after the arrival of new
* data was signalled in an interrupt */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
#ifdef CONFIG_DEBUG_SENSORS_INFO
static void lis3dsh_read_register(FAR struct lis3dsh_dev_s *dev,
uint8_t const reg_addr, uint8_t *reg_data);
#endif
static void lis3dsh_write_register(FAR struct lis3dsh_dev_s *dev,
uint8_t const reg_addr,
uint8_t const reg_data);
static void lis3dsh_reset(FAR struct lis3dsh_dev_s *dev);
static void lis3dsh_read_measurement_data(FAR struct lis3dsh_dev_s *dev);
static void lis3dsh_read_acclerometer_data(FAR struct lis3dsh_dev_s *dev,
uint16_t *x_acc, uint16_t *y_acc,
uint16_t *z_acc);
static int lis3dsh_interrupt_handler(int irq, FAR void *context,
FAR void *arg);
static void lis3dsh_worker(FAR void *arg);
static int lis3dsh_open(FAR struct file *filep);
static int lis3dsh_close(FAR struct file *filep);
static ssize_t lis3dsh_read(FAR struct file *, FAR char *buffer,
size_t buflen);
static ssize_t lis3dsh_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations g_lis3dsh_fops =
{
lis3dsh_open, /* open */
lis3dsh_close, /* close */
lis3dsh_read, /* read */
lis3dsh_write, /* write */
NULL, /* seek */
NULL, /* ioctl */
NULL /* poll */
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, NULL /* unlink */
#endif
};
/* Single linked list to store instances of drivers */
static struct lis3dsh_dev_s *g_lis3dsh_list = NULL;
/****************************************************************************
* Private Functions
****************************************************************************/
#ifdef CONFIG_DEBUG_SENSORS_INFO
/****************************************************************************
* Name: lis3dsh_read_register
****************************************************************************/
static void lis3dsh_read_register(FAR struct lis3dsh_dev_s *dev,
uint8_t const reg_addr, uint8_t * reg_data)
{
/* Lock the SPI bus so that only one device can access it at the same
* time
*/
SPI_LOCK(dev->spi, true);
/* Set CS to low which selects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, true);
/* Transmit the register address from where we want to read - the MSB needs
* to be set to indicate the read indication.
*/
SPI_SEND(dev->spi, reg_addr | 0x80);
/* Write an idle byte while receiving the required data */
*reg_data = (uint8_t) (SPI_SEND(dev->spi, 0));
/* Set CS to high which deselects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, false);
/* Unlock the SPI bus */
SPI_LOCK(dev->spi, false);
}
#endif
/****************************************************************************
* Name: lis3dsh_write_register
****************************************************************************/
static void lis3dsh_write_register(FAR struct lis3dsh_dev_s *dev,
uint8_t const reg_addr,
uint8_t const reg_data)
{
/* Lock the SPI bus so that only one device can access it at the same
* time
*/
SPI_LOCK(dev->spi, true);
/* Set CS to low which selects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, true);
/* Transmit the register address from where we want to read */
SPI_SEND(dev->spi, reg_addr);
/* Transmit the content which should be written in the register */
SPI_SEND(dev->spi, reg_data);
/* Set CS to high which deselects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, false);
/* Unlock the SPI bus */
SPI_LOCK(dev->spi, false);
}
/****************************************************************************
* Name: lis3dsh_reset
****************************************************************************/
static void lis3dsh_reset(FAR struct lis3dsh_dev_s *dev)
{
lis3dsh_write_register(dev, LIS3DSH_CTRL_REG_6,
LIS3DSH_CTRL_REG_6_BOOT_BM);
up_mdelay(100);
}
/****************************************************************************
* Name: lis3dsh_read_measurement_data
****************************************************************************/
static void lis3dsh_read_measurement_data(FAR struct lis3dsh_dev_s *dev)
{
uint16_t x_acc = 0;
uint16_t y_acc = 0;
uint16_t z_acc = 0;
int ret;
/* Read acclerometer data */
lis3dsh_read_acclerometer_data(dev, &x_acc, &y_acc, &z_acc);
/* Acquire the mutex before the data is copied */
ret = nxmutex_lock(&dev->datalock);
if (ret < 0)
{
snerr("ERROR: Could not acquire dev->datalock: %d\n", ret);
return;
}
/* Copy retrieve data to internal data structure */
dev->data.x_acc = (int16_t)x_acc;
dev->data.y_acc = (int16_t)y_acc;
dev->data.z_acc = (int16_t)z_acc;
/* Give back the mutex */
nxmutex_unlock(&dev->datalock);
/* Feed sensor data to entropy pool */
add_sensor_randomness((x_acc << 16) ^ (y_acc << 8) ^ (z_acc << 0));
}
/****************************************************************************
* Name: lis3dsh_read_acclerometer_data
****************************************************************************/
static void lis3dsh_read_acclerometer_data(FAR struct lis3dsh_dev_s *dev,
uint16_t * x_acc,
uint16_t * y_acc,
uint16_t * z_acc)
{
/* Lock the SPI bus so that only one device can access it at the same
* time
*/
SPI_LOCK(dev->spi, true);
/* Set CS to low which selects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, true);
/* Transmit the register address from where we want to start reading
* 0x80 -> MSB is set -> Read Indication.
*/
SPI_SEND(dev->spi, (LIS3DSH_OUT_X_L_REG | 0x80));
/* RX */
*x_acc = ((uint16_t) (SPI_SEND(dev->spi, 0)) << 0); /* LSB */
*x_acc |= ((uint16_t) (SPI_SEND(dev->spi, 0)) << 8); /* MSB */
*y_acc = ((uint16_t) (SPI_SEND(dev->spi, 0)) << 0); /* LSB */
*y_acc |= ((uint16_t) (SPI_SEND(dev->spi, 0)) << 8); /* MSB */
*z_acc = ((uint16_t) (SPI_SEND(dev->spi, 0)) << 0); /* LSB */
*z_acc |= ((uint16_t) (SPI_SEND(dev->spi, 0)) << 8); /* MSB */
/* Set CS to high which deselects the LIS3DSH */
SPI_SELECT(dev->spi, dev->config->spi_devid, false);
/* Unlock the SPI bus */
SPI_LOCK(dev->spi, false);
}
/****************************************************************************
* Name: lis3dsh_interrupt_handler
****************************************************************************/
static int lis3dsh_interrupt_handler(int irq, FAR void *context,
FAR void *arg)
{
/* This function should be called upon a rising edge on the LIS3DSH new
* data interrupt pin since it signals that new data has been measured.
*/
FAR struct lis3dsh_dev_s *priv = NULL;
int ret;
/* Find out which device caused the interrupt */
for (priv = g_lis3dsh_list;
priv && priv->config->irq != irq;
priv = priv->flink)
{
}
DEBUGASSERT(priv != NULL);
/* Task the worker with retrieving the latest sensor data. We should not do
* this in a interrupt since it might take too long. Also we cannot lock
* the SPI bus from within an interrupt.
*/
if (work_available(&priv->work))
{
ret = work_queue(HPWORK, &priv->work, lis3dsh_worker, priv, 0);
if (ret < 0)
{
snerr("ERROR: Failed to queue work: %d\n", ret);
return ret;
}
}
return OK;
}
/****************************************************************************
* Name: lis3dsh_worker
****************************************************************************/
static void lis3dsh_worker(FAR void *arg)
{
FAR struct lis3dsh_dev_s *priv = (FAR struct lis3dsh_dev_s *)(arg);
DEBUGASSERT(priv != NULL);
/* Read out the latest sensor data */
lis3dsh_read_measurement_data(priv);
}
/****************************************************************************
* Name: lis3dsh_open
****************************************************************************/
static int lis3dsh_open(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct lis3dsh_dev_s *priv = inode->i_private;
DEBUGASSERT(priv != NULL);
/* Perform a reset */
lis3dsh_reset(priv);
/* Enable - the full scale range (FS = +/- 16 g) */
lis3dsh_write_register(priv,
LIS3DSH_CTRL_REG_5, LIS3DSH_CTRL_REG_5_FSCALE_2_BM);
/* Enable - Auto increment of address when reading multiple bytes */
lis3dsh_write_register(priv,
LIS3DSH_CTRL_REG_6, LIS3DSH_CTRL_REG_6_ADD_INC_BM);
/* Enable - Measurement of X-, Y-, and Z-axis - Block data update for
* accelerating data This should prevent race conditions when reading
* sensor data - fastest output data rate (ODR = 1600 Hz).
*/
lis3dsh_write_register(priv,
LIS3DSH_CTRL_REG_4,
LIS3DSH_CTRL_REG_4_XEN_BM |
LIS3DSH_CTRL_REG_4_YEN_BM |
LIS3DSH_CTRL_REG_4_ZEN_BM |
LIS3DSH_CTRL_REG_4_BDU_BM |
LIS3DSH_CTRL_REG_4_ODR_3_BM |
LIS3DSH_CTRL_REG_4_ODR_0_BM);
/* Enable - DRDY signal enable to INT 1 */
lis3dsh_write_register(priv,
LIS3DSH_CTRL_REG_3,
LIS3DSH_CTRL_REG_3_DR_EN_BM |
LIS3DSH_CTRL_REG_3_IEA_BM |
LIS3DSH_CTRL_REG_3_IEL_BM |
LIS3DSH_CTRL_REG_3_INT1_EN_BM);
/* Read back the content of all control registers for debug purposes */
#ifdef CONFIG_DEBUG_SENSORS_INFO
{
uint8_t reg_content = 0;
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_1, &reg_content);
sninfo("LIS3DSH_CTRL_REG_1 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_2, &reg_content);
sninfo("LIS3DSH_CTRL_REG_2 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_3, &reg_content);
sninfo("LIS3DSH_CTRL_REG_3 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_4, &reg_content);
sninfo("LIS3DSH_CTRL_REG_4 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_5, &reg_content);
sninfo("LIS3DSH_CTRL_REG_5 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_CTRL_REG_6, &reg_content);
sninfo("LIS3DSH_CTRL_REG_6 = %04x\n", reg_content);
lis3dsh_read_register(priv, LIS3DSH_STATUS_REG, &reg_content);
sninfo("STATUS_REG = %04x\n", reg_content);
}
#endif
return OK;
}
/****************************************************************************
* Name: lis3dsh_close
****************************************************************************/
static int lis3dsh_close(FAR struct file *filep)
{
FAR struct inode *inode = filep->f_inode;
FAR struct lis3dsh_dev_s *priv = inode->i_private;
DEBUGASSERT(priv != NULL);
/* Perform a reset */
lis3dsh_reset(priv);
return OK;
}
/****************************************************************************
* Name: lis3dsh_read
****************************************************************************/
static ssize_t lis3dsh_read(FAR struct file *filep, FAR char *buffer,
size_t buflen)
{
FAR struct inode *inode = filep->f_inode;
FAR struct lis3dsh_dev_s *priv = inode->i_private;
FAR struct lis3dsh_sensor_data_s *data;
int ret;
DEBUGASSERT(priv != NULL);
/* Check if enough memory was provided for the read call */
if (buflen < sizeof(FAR struct lis3dsh_sensor_data_s))
{
snerr("ERROR: Not enough memory for reading out a sensor data"
" sample\n");
return -ENOSYS;
}
/* Acquire the mutex before the data is copied */
ret = nxmutex_lock(&priv->datalock);
if (ret < 0)
{
snerr("ERROR: Could not acquire priv->datalock: %d\n", ret);
return ret;
}
/* Copy the sensor data into the buffer */
data = (FAR struct lis3dsh_sensor_data_s *)buffer;
memset(data, 0, sizeof(FAR struct lis3dsh_sensor_data_s));
data->x_acc = priv->data.x_acc;
data->y_acc = priv->data.y_acc;
data->z_acc = priv->data.z_acc;
/* Give back the mutex */
nxmutex_unlock(&priv->datalock);
return sizeof(FAR struct lis3dsh_sensor_data_s);
}
/****************************************************************************
* Name: lis3dsh_write
****************************************************************************/
static ssize_t lis3dsh_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen)
{
return -ENOSYS;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: lis3dsh_register
*
* Description:
* Register the LIS3DSH character device as 'devpath'
*
* Input Parameters:
* devpath - The full path to the driver to register. E.g., "/dev/acc0"
* spi - An instance of the SPI interface to use to communicate with
* LIS3DSH
* config - configuration for the LIS3DSH driver.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
int lis3dsh_register(FAR const char *devpath, FAR struct spi_dev_s *spi,
FAR struct lis3dsh_config_s *config)
{
FAR struct lis3dsh_dev_s *priv;
int ret;
/* Sanity check */
DEBUGASSERT(spi != NULL);
DEBUGASSERT(config != NULL);
/* Initialize the LIS3DSH device structure */
priv =
(FAR struct lis3dsh_dev_s *)kmm_malloc(sizeof(struct lis3dsh_dev_s));
if (priv == NULL)
{
snerr("ERROR: Failed to allocate instance\n");
return -ENOMEM;
}
priv->spi = spi;
priv->config = config;
priv->work.worker = NULL;
nxmutex_init(&priv->datalock); /* Initialize sensor data access mutex */
/* Setup SPI frequency and mode */
SPI_SETFREQUENCY(spi, LIS3DSH_SPI_FREQUENCY);
SPI_SETMODE(spi, LIS3DSH_SPI_MODE);
/* Register the character driver */
ret = register_driver(devpath, &g_lis3dsh_fops, 0666, priv);
if (ret < 0)
{
snerr("ERROR: Failed to register driver: %d\n", ret);
nxmutex_destroy(&priv->datalock);
kmm_free(priv);
return ret;
}
/* Since we support multiple LIS3DSH devices, we will need to add this new
* instance to a list of device instances so that it can be found by the
* interrupt handler based on the received IRQ number.
*/
priv->flink = g_lis3dsh_list;
g_lis3dsh_list = priv;
/* Attach the interrupt handler */
ret = priv->config->attach(priv->config, &lis3dsh_interrupt_handler);
if (ret < 0)
{
snerr("ERROR: Failed to attach interrupt: %d\n", ret);
nxmutex_destroy(&priv->datalock);
kmm_free(priv);
return ret;
}
return OK;
}
#endif /* CONFIG_SPI && CONFIG_LIS3DSH */
Reference in New Issue View Git Blame Copy Permalink