Gregory Nutt c8a8eb028f arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.

2017-12-15 11:38:55 -06:00

..

lpc54_appinit.c

…

lpc54_autoleds.c

…

lpc54_boot.c

arch/arm/src/lpc54xx: Clone the LPC1788 LCD driver. The LPC54628 LCD interface is identical. The initial commit is a brute force clone. It still needs review to make sure the LDC is appropriately enabled in the SYSCON and that clocking is provided. Also, extend the SPI 'skeleton' file so that has a place to support for SPI DMA and the SPI exchange method.

2017-12-12 10:13:21 -06:00

lpc54_bringup.c

arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.

2017-12-15 11:38:55 -06:00

lpc54_lcd.c

arch/arm/src/lpc54xx: Clone the LPC1788 LCD driver. The LPC54628 LCD interface is identical. The initial commit is a brute force clone. It still needs review to make sure the LDC is appropriately enabled in the SYSCON and that clocking is provided. Also, extend the SPI 'skeleton' file so that has a place to support for SPI DMA and the SPI exchange method.

2017-12-12 10:13:21 -06:00

lpc54_sdram.c

arch/arm/src/lpc54xx: Correct the EMC divider register definition and one typo in the SDRAM setup. SDRAM is not fully functional on this board!

2017-12-12 08:24:57 -06:00

lpc54_userleds.c

…

lpcxpresso-lpc54628.h

arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.

2017-12-15 11:38:55 -06:00

Makefile

arch/arm/src/lpc54xx: Clone the LPC1788 LCD driver. The LPC54628 LCD interface is identical. The initial commit is a brute force clone. It still needs review to make sure the LDC is appropriately enabled in the SYSCON and that clocking is provided. Also, extend the SPI 'skeleton' file so that has a place to support for SPI DMA and the SPI exchange method.

2017-12-12 10:13:21 -06:00