248 lines
11 KiB
C
248 lines
11 KiB
C
/************************************************************************************
|
|
* configs/stm32f0discovery/include/board.h
|
|
*
|
|
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
* Alan Carvalho de Assis <acassis@gmail.com>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIG_STM32F0DISCOVERY_INCLUDE_BOARD_H
|
|
#define __CONFIG_STM32F0DISCOVERY_INCLUDE_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
/* Four different clock sources can be used to drive the system clock (SYSCLK):
|
|
*
|
|
* - HSI high-speed internal oscillator clock
|
|
* Generated from an internal 8 MHz RC oscillator
|
|
* - HSE high-speed external oscillator clock
|
|
* Normally driven by an external crystal (X3). However, this crystal is not
|
|
* fitted on the STM32F0-Discovery board.
|
|
* - PLL clock
|
|
* - MSI multispeed internal oscillator clock
|
|
* The MSI clock signal is generated from an internal RC oscillator. Seven frequency
|
|
* ranges are available: 65.536 kHz, 131.072 kHz, 262.144 kHz, 524.288 kHz, 1.048 MHz,
|
|
* 2.097 MHz (default value) and 4.194 MHz.
|
|
*
|
|
* The devices have the following two secondary clock sources
|
|
* - LSI low-speed internal RC clock
|
|
* Drives the watchdog and RTC. Approximately 37KHz
|
|
* - LSE low-speed external oscillator clock
|
|
* Driven by 32.768KHz crystal (X2) on the OSC32_IN and OSC32_OUT pins.
|
|
*/
|
|
|
|
#define STM32F0_BOARD_XTAL 8000000ul /* X3 on board (not fitted)*/
|
|
|
|
#define STM32F0_HSI_FREQUENCY 8000000ul /* Approximately 8MHz */
|
|
#define STM32F0_HSI14_FREQUENCY 14000000ul /* HSI14 for ADC */
|
|
#define STM32F0_HSI48_FREQUENCY 48000000ul /* HSI48 for USB, only some STM32F0xx */
|
|
#define STM32F0_HSE_FREQUENCY STM32F0_BOARD_XTAL
|
|
#define STM32F0_LSI_FREQUENCY 40000 /* Approximately 40KHz */
|
|
#define STM32F0_LSE_FREQUENCY 32768 /* X2 on board */
|
|
|
|
/* PLL Configuration
|
|
*
|
|
* - PLL source is HSI -> 8MHz input (nominal)
|
|
* - PLL source predivider 2 -> 4MHz divided down PLL VCO clock output
|
|
* - PLL multipler is 12 -> 48MHz PLL VCO clock output (for USB)
|
|
*
|
|
* Resulting SYSCLK frequency is 8MHz x 12 / 2 = 48MHz
|
|
*
|
|
* USB:
|
|
* If the USB interface is used in the application, it requires a precise
|
|
* 48MHz clock which can be generated from either the (1) the internal
|
|
* main PLL with the HSE clock source using an HSE crystal oscillator. In
|
|
* this case, the PLL VCO clock (defined by STM32F0_CFGR_PLLMUL) must be
|
|
* programmed to output a 96 MHz frequency. This is required to provide a
|
|
* 48MHz clock to the (USBCLK = PLLVCO/2). Or (2) by using the internal
|
|
* 48MHz oscillator in automatic trimming mode. The synchronization for
|
|
* this oscillator can be taken from the USB data stream itself (SOF
|
|
* signalization) which allows crystal-less operation.
|
|
* SYSCLK
|
|
* The system clock is derived from the PLL VCO divided by the output
|
|
* division factor.
|
|
* Limitations:
|
|
* - 96 MHz as PLLVCO when the product is in range 1 (1.8V),
|
|
* - 48 MHz as PLLVCO when the product is in range 2 (1.5V),
|
|
* - 24 MHz when the product is in range 3 (1.2V).
|
|
* - Output division to avoid exceeding 32 MHz as SYSCLK.
|
|
* - The minimum input clock frequency for PLL is 2 MHz (when using HSE as
|
|
* PLL source).
|
|
*/
|
|
|
|
#define STM32F0_CFGR_PLLSRC RCC_CFGR_PLLSRC_HSId2 /* Source is HSI/2 */
|
|
#define STM32F0_PLLSRC_FREQUENCY (STM32F0_HSI_FREQUENCY/2) /* 8MHz / 2 = 4MHz */
|
|
#ifdef CONFIG_STM32F0_USB
|
|
# undef STM32F0_CFGR2_PREDIV /* Not used with source HSI/2 */
|
|
# define STM32F0_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx12 /* PLLMUL = 12 */
|
|
# define STM32F0_PLL_FREQUENCY (12*STM32F0_PLLSRC_FREQUENCY) /* PLL VCO Frequency is 48MHz */
|
|
#else
|
|
# undef STM32F0_CFGR2_PREDIV /* Not used with source HSI/2 */
|
|
# define STM32F0_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx12 /* PLLMUL = 12 */
|
|
# define STM32F0_PLL_FREQUENCY (12*STM32F0_PLLSRC_FREQUENCY) /* PLL VCO Frequency is 48MHz */
|
|
#endif
|
|
|
|
/* Use the PLL and set the SYSCLK source to be the divided down PLL VCO output
|
|
* frequency (STM32F0_PLL_FREQUENCY divided by the PLLDIV value).
|
|
*/
|
|
|
|
#define STM32F0_SYSCLK_SW RCC_CFGR_SW_PLL /* Use the PLL as the SYSCLK */
|
|
#define STM32F0_SYSCLK_SWS RCC_CFGR_SWS_PLL
|
|
#ifdef CONFIG_STM32F0_USB
|
|
# define STM32F0_SYSCLK_FREQUENCY STM32F0_PLL_FREQUENCY /* SYSCLK frequency is PLL VCO = 48MHz */
|
|
#else
|
|
# define STM32F0_SYSCLK_FREQUENCY STM32F0_PLL_FREQUENCY /* SYSCLK frequency is PLL VCO = 48MHz */
|
|
#endif
|
|
|
|
#define STM32F0_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
|
|
#define STM32F0_HCLK_FREQUENCY STM32F0_SYSCLK_FREQUENCY
|
|
#define STM32F0_BOARD_HCLK STM32F0_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
|
|
|
|
/* APB1 clock (PCLK1) is HCLK (48MHz) */
|
|
|
|
#define STM32F0_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK
|
|
#define STM32F0_PCLK1_FREQUENCY (STM32F0_HCLK_FREQUENCY)
|
|
|
|
/* APB2 clock (PCLK2) is HCLK (48MHz) */
|
|
|
|
#define STM32F0_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
|
|
#define STM32F0_PCLK2_FREQUENCY STM32F0_HCLK_FREQUENCY
|
|
#define STM32F0_APB2_CLKIN (STM32F0_PCLK2_FREQUENCY)
|
|
|
|
/* APB1 timers 1-3, 6-7, and 14-17 will receive PCLK1 */
|
|
|
|
#define STM32F0_APB1_TIM1_CLKIN (STM32F0_PCLK1_FREQUENCY)
|
|
#define STM32F0_APB1_TIM2_CLKIN (STM32F0_PCLK1_FREQUENCY)
|
|
#define STM32F0_APB1_TIM3_CLKIN (STM32F0_PCLK1_FREQUENCY)
|
|
|
|
#define STM32F0_APB1_TIM6_CLKIN (STM32F0_PCLK1_FREQUENCY)
|
|
#define STM32F0_APB1_TIM7_CLKIN (STM32F0_PCLK1_FREQUENCY)
|
|
|
|
#define STM32F0_APB1_TIM14_CLKIN (STM32F0_PCLK1_FREQUENCY)
|
|
#define STM32F0_APB1_TIM15_CLKIN (STM32F0_PCLK1_FREQUENCY)
|
|
#define STM32F0_APB1_TIM16_CLKIN (STM32F0_PCLK1_FREQUENCY)
|
|
#define STM32F0_APB1_TIM17_CLKIN (STM32F0_PCLK1_FREQUENCY)
|
|
|
|
/* LED definitions ******************************************************************/
|
|
/* The STM32F0-Discovery board has four LEDs. Two of these are controlled by
|
|
* logic on the board and are not available for software control:
|
|
*
|
|
* LD1 COM: LD2 default status is red. LD2 turns to green to indicate that
|
|
* communications are in progress between the PC and the ST-LINK/V2.
|
|
* LD2 PWR: Red LED indicates that the board is powered.
|
|
*
|
|
* And two LEDs can be controlled by software:
|
|
*
|
|
* User LD3: Green LED is a user LED connected to the I/O PB7 of the STM32F051R8
|
|
* MCU.
|
|
* User LD4: Blue LED is a user LED connected to the I/O PB6 of the STM32F051R8
|
|
* MCU.
|
|
*
|
|
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
|
|
* way. The following definitions are used to access individual LEDs.
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0 /* User LD3 */
|
|
#define BOARD_LED2 1 /* User LD4 */
|
|
#define BOARD_NLEDS 2
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 8 LEDs on board the
|
|
* STM32F0-Discovery. The following definitions describe how NuttX controls the LEDs:
|
|
*
|
|
* SYMBOL Meaning LED state
|
|
* LED1 LED2
|
|
* ------------------- ----------------------- -------- --------
|
|
* LED_STARTED NuttX has been started OFF OFF
|
|
* LED_HEAPALLOCATE Heap has been allocated OFF OFF
|
|
* LED_IRQSENABLED Interrupts enabled OFF OFF
|
|
* LED_STACKCREATED Idle stack created ON OFF
|
|
* LED_INIRQ In an interrupt No change
|
|
* LED_SIGNAL In a signal handler No change
|
|
* LED_ASSERTION An assertion failed No change
|
|
* LED_PANIC The system has crashed OFF Blinking
|
|
* LED_IDLE STM32 is is sleep mode Not used
|
|
*/
|
|
|
|
#define LED_STARTED 0
|
|
#define LED_HEAPALLOCATE 0
|
|
#define LED_IRQSENABLED 0
|
|
#define LED_STACKCREATED 1
|
|
#define LED_INIRQ 2
|
|
#define LED_SIGNAL 2
|
|
#define LED_ASSERTION 2
|
|
#define LED_PANIC 3
|
|
|
|
/* Button definitions ***************************************************************/
|
|
/* The STM32F0-Discovery supports two buttons; only one button is controllable by
|
|
* software:
|
|
*
|
|
* B1 USER: user and wake-up button connected to the I/O PA0 of the STM32F051R8.
|
|
* B2 RESET: pushbutton connected to NRST is used to RESET the STM32F051R8.
|
|
*/
|
|
|
|
#define BUTTON_USER 0
|
|
#define NUM_BUTTONS 1
|
|
|
|
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
|
|
|
/* Alternate Pin Functions **********************************************************/
|
|
/* USART 1 */
|
|
|
|
#define GPIO_USART1_TX GPIO_USART1_TX_1
|
|
#define GPIO_USART1_RX GPIO_USART1_RX_1
|
|
|
|
/* I2C pins definition */
|
|
|
|
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1
|
|
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1
|
|
|
|
#endif /* __CONFIG_STM32F0DISCOVERY_INCLUDE_BOARD_H */
|