nuttx/boards/arm/sama5/jupiter-nano/configs/nsh/defconfig
Xiang Xiao b183114d43 arch/arm: Change the default value to ARCH_TRUSTZONE_NONSECURE
since nuttx normally run inside the non secure execution environment

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-08-13 08:43:01 +02:00

79 lines
2.1 KiB
Plaintext

#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_AUDIO_FORMAT_MP3 is not set
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_SAMA5_UART0 is not set
# CONFIG_SAMA5_UHPHS_RHPORT1 is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="sama5d2-xult"
CONFIG_ARCH_BOARD_SAMA5D2_XULT=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP="sama5"
CONFIG_ARCH_CHIP_ATSAMA5D27=y
CONFIG_ARCH_CHIP_SAMA5=y
CONFIG_ARCH_CHIP_SAMA5D2=y
CONFIG_ARCH_INTERRUPTSTACK=2048
CONFIG_ARCH_IRQBUTTONS=y
CONFIG_ARCH_LOWVECTORS=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARCH_TRUSTZONE_SECURE=y
CONFIG_AUDIO=y
CONFIG_AUDIO_NUM_BUFFERS=8
CONFIG_BOARD_LOOPSPERMSEC=65775
CONFIG_BOOT_RUNFROMSDRAM=y
CONFIG_BUILTIN=y
CONFIG_DEV_ZERO=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FS_FAT=y
CONFIG_FS_PROCFS=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_HIDKBD_POLLUSEC=80000
CONFIG_I2S=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_NXPLAYER_DEFAULT_MEDIADIR="/mnt/sdcard"
CONFIG_NXPLAYER_INCLUDE_SYSTEM_RESET=y
CONFIG_NXPLAYER_RECURSIVE_MEDIA_SEARCH=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAMLOG=y
CONFIG_RAMLOG_BUFSIZE=16384
CONFIG_RAMLOG_SYSLOG=y
CONFIG_RAM_SIZE=268435456
CONFIG_RAM_START=0x20000000
CONFIG_RAM_VSTART=0x20000000
CONFIG_RR_INTERVAL=200
CONFIG_SAMA5D2XULT_498MHZ=y
CONFIG_SAMA5_BOOT_SDRAM=y
CONFIG_SAMA5_DDRCS_HEAP_END=0x2fa00000
CONFIG_SAMA5_DDRCS_RESERVE=y
CONFIG_SAMA5_EHCI=y
CONFIG_SAMA5_OHCI=y
CONFIG_SAMA5_PIO_IRQ=y
CONFIG_SAMA5_RTC=y
CONFIG_SAMA5_TRNG=y
CONFIG_SAMA5_UART1=y
CONFIG_SAMA5_UHPHS=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=192
CONFIG_SCHED_WAITPID=y
CONFIG_SYMTAB_ORDEREDBYNAME=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_NXPLAYER=y
CONFIG_UART1_SERIAL_CONSOLE=y
CONFIG_UBOOT_UIMAGE=y
CONFIG_UIMAGE_ENTRY_POINT=0x20008040
CONFIG_UIMAGE_LOAD_ADDRESS=0x20008000
CONFIG_USBHOST_HIDKBD=y
CONFIG_USBHOST_MSC=y