nuttx/boards/arm/lpc31xx/ea3152/include/board.h
Alin Jerpelea 40cd67eee6 boards: arm: Author Gregory Nutt: update licenses to Apache
Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-18 22:58:27 -07:00

102 lines
4.4 KiB
C

/****************************************************************************
* boards/arm/lpc31xx/ea3152/include/board.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_LPC31XX_EA3152_INCLUDE_BOARD_H
#define __BOARDS_ARM_LPC31XX_EA3152_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
# include "lpc31_cgudrvr.h"
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* Frequency of the FFAST input */
#define BOARD_FREQIN_FFAST (12000000) /* ffast (12 MHz crystal) */
/* HPLL0 configuration */
#define BOARD_HPLL0_FINSEL CGU_HPFINSEL_FFAST /* Frequency input selection */
#define BOARD_HPLL0_NDEC 131 /* PLL N-divider value */
#define BOARD_HPLL0_MDEC 29784 /* PLL M-divider value */
#define BOARD_HPLL0_PDEC 7 /* PLL P-divider value */
#define BOARD_HPLL0_SELR 0 /* SELR bandwidth selection */
#define BOARD_HPLL0_SELI 8 /* SELI bandwidth selection */
#define BOARD_HPLL0_SELP 31 /* SELP bandwidth selection */
#define BOARD_HPLL0_MODE 0 /* PLL mode */
#define BOARD_HPLL0_FREQ 406425600 /* Frequency of the PLL in MHz */
/* HPLL1 configuration */
#define BOARD_HPLL1_FINSEL CGU_HPFINSEL_FFAST /* Frequency input selection */
#define BOARD_HPLL1_NDEC 770 /* PLL N-divider value */
#define BOARD_HPLL1_MDEC 8191 /* PLL M-divider value */
#define BOARD_HPLL1_PDEC 98 /* PLL P-divider value */
#define BOARD_HPLL1_SELR 0 /* SELR bandwidth selection */
#define BOARD_HPLL1_SELI 16 /* SELI bandwidth selection */
#define BOARD_HPLL1_SELP 8 /* SELP bandwidth selection */
#define BOARD_HPLL1_MODE 0 /* PLL mode */
#define BOARD_HPLL1_FREQ 180000000 /* Frequency of the PLL in MHz */
/* The following 3 bitsets determine which clocks will be enabled at
* initialization time.
*/
#define BOARD_CLKS_0_31 \
(_RBIT(CLKID_APB0CLK,0)|_RBIT(CLKID_APB1CLK,0)|_RBIT(CLKID_APB2CLK,0)|\
_RBIT(CLKID_APB3CLK,0)|_RBIT(CLKID_APB4CLK,0)|_RBIT(CLKID_AHB2INTCCLK,0)|\
_RBIT(CLKID_AHB0CLK,0)|_RBIT(CLKID_ARM926CORECLK,0)|_RBIT(CLKID_ARM926BUSIFCLK,0)|\
_RBIT(CLKID_ARM926RETIMECLK,0)|_RBIT(CLKID_ISRAM0CLK,0)|_RBIT(CLKID_ISRAM1CLK,0)|\
_RBIT(CLKID_ISROMCLK,0)|_RBIT(CLKID_INTCCLK,0)|_RBIT(CLKID_AHB2APB0PCLK,0)|\
_RBIT(CLKID_EVENTROUTERPCLK,0)|_RBIT(CLKID_CLOCKOUT,0))
#define BOARD_CLKS_32_63 \
(_RBIT(CLKID_IOCONFPCLK,32)|_RBIT(CLKID_CGUPCLK,32)|_RBIT(CLKID_SYSCREGPCLK,32)|\
_RBIT(CLKID_OTPPCLK,32)|_RBIT(CLKID_AHB2APB1PCLK,32)|_RBIT(CLKID_AHB2APB2PCLK,32)|\
_RBIT(CLKID_AHB2APB3PCLK,32)|_RBIT(CLKID_EDGEDETPCLK,32))
#define BOARD_CLKS_64_92 \
(0)
/* LED definitions **********************************************************/
#define LED_STARTED 0
#define LED_HEAPALLOCATE 1
#define LED_IRQSENABLED 2
#define LED_STACKCREATED 3
#define LED_INIRQ 4
#define LED_SIGNAL 5
#define LED_ASSERTION 6
#define LED_PANIC 7
/* Button definitions *******************************************************/
#endif /* __BOARDS_ARM_LPC31XX_EA3152_INCLUDE__BOARD_H */