nuttx/include/net/uip/uip-arch.h
patacongo 90b03e1746 Fix minimum MTU... must be at lest 576
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3674 42af7a65-404d-4744-a932-0658087f49c3
2011-06-06 15:06:08 +00:00

371 lines
12 KiB
C

/****************************************************************************
* uip-arch.h
* Defines architecture-specific device driver interfaces to uIP
*
* Copyright (C) 2007, 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Derived largely from portions of uIP with has a similar BSD-styple license:
*
* Copyright (c) 2001-2003, Adam Dunkels.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __UIP_ARCH_H
#define __UIP_ARCH_H
#include <nuttx/config.h>
#include <sys/ioctl.h>
#include <stdint.h>
#include <net/if.h>
#include <net/uip/uip.h>
#ifdef CONFIG_NET_IGMP
# include <net/uip/uip-igmp.h>
#endif
/****************************************************************************
* Included Files
****************************************************************************/
#include <net/uip/uipopt.h>
#include <net/ethernet.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Public Types
****************************************************************************/
/* This structure collects information that is specific to a specific network
* interface driver. If the hardware platform supports only a single instance
* of this structure.
*/
struct uip_driver_s
{
/* This link is used to maintain a single-linked list of ethernet drivers.
* Must be the first field in the structure due to blink type casting.
*/
#if CONFIG_NSOCKET_DESCRIPTORS > 0
FAR struct uip_driver_s *flink;
/* This is the name of network device assigned when netdev_register was called.
* This name is only used to support socket ioctl lookups by device name
* Examples: "eth0"
*/
char d_ifname[IFNAMSIZ];
#endif
/* Ethernet device identity */
#ifdef CONFIG_NET_ETHERNET
struct ether_addr d_mac; /* Device MAC address */
#endif
/* Network identity */
uip_ipaddr_t d_ipaddr; /* Host IP address assigned to the network interface */
uip_ipaddr_t d_draddr; /* Default router IP address */
uip_ipaddr_t d_netmask; /* Network subnet mask */
/* The d_buf array is used to hold incoming and outgoing packets. The device
* driver should place incoming data into this buffer. When sending data,
* the device driver should read the link level headers and the TCP/IP
* headers from this buffer. The size of the link level headers is
* configured by the UIP_LLH_LEN define.
*
* uIP will handle only a single buffer for both incoming and outgoing
* packets. However, the drive design may be concurrently send and
* filling separate, break-off buffers if CONFIG_NET_MULTIBUFFER is
* defined. That buffer management must be controlled by the driver.
*/
#ifdef CONFIG_NET_MULTIBUFFER
uint8_t *d_buf;
#else
uint8_t d_buf[CONFIG_NET_BUFSIZE + CONFIG_NET_GUARDSIZE];
#endif
/* d_appdata points to the location where application data can be read from
* or written into a packet.
*/
uint8_t *d_appdata;
/* This is a pointer into d_buf where a user application may append
* data to be sent.
*/
uint8_t *d_snddata;
#ifdef CONFIG_NET_TCPURGDATA
/* This pointer points to any urgent TCP data that has been received. Only
* present if compiled with support for urgent data (CONFIG_NET_TCPURGDATA).
*/
uint8_t *d_urgdata;
/* Length of the (received) urgent data */
uint16_t d_urglen;
#endif
/* The length of the packet in the d_buf buffer.
*
* Holds the length of the packet in the d_buf buffer.
*
* When the network device driver calls the uIP input function,
* d_len should be set to the length of the packet in the d_buf
* buffer.
*
* When sending packets, the device driver should use the contents of
* the d_len variable to determine the length of the outgoing
* packet.
*/
uint16_t d_len;
/* When d_buf contains outgoing xmit data, xmtlen is nonzero and represents
* the amount of appllcation data after d_snddata
*/
uint16_t d_sndlen;
/* IGMP group list */
#ifdef CONFIG_NET_IGMP
sq_queue_t grplist;
#endif
/* Driver callbacks */
int (*d_ifup)(struct uip_driver_s *dev);
int (*d_ifdown)(struct uip_driver_s *dev);
int (*d_txavail)(struct uip_driver_s *dev);
#ifdef CONFIG_NET_IGMP
int (*d_addmac)(struct uip_driver_s *dev, FAR const uint8_t *mac);
int (*d_rmmac)(struct uip_driver_s *dev, FAR const uint8_t *mac);
#endif
/* Drivers may attached device-specific, private information */
void *d_private;
};
/****************************************************************************
* Public Variables
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/* uIP device driver functions
*
* These functions are used by a network device driver for interacting
* with uIP.
*
* Process an incoming packet.
*
* This function should be called when the device driver has received
* a packet from the network. The packet from the device driver must
* be present in the d_buf buffer, and the length of the packet
* should be placed in the d_len field.
*
* When the function returns, there may be an outbound packet placed
* in the d_buf packet buffer. If so, the d_len field is set to
* the length of the packet. If no packet is to be sent out, the
* d_len field is set to 0.
*
* The usual way of calling the function is presented by the source
* code below.
*
* dev->d_len = devicedriver_poll();
* if(dev->d_len > 0) {
* uip_input(dev);
* if(dev->d_len > 0) {
* devicedriver_send();
* }
* }
*
* Note: If you are writing a uIP device driver that needs ARP
* (Address Resolution Protocol), e.g., when running uIP over
* Ethernet, you will need to call the uIP ARP code before calling
* this function:
*
* #define BUF ((struct uip_eth_hdr *)&dev->d_buf[0])
* dev->d_len = ethernet_devicedrver_poll();
* if(dev->d_len > 0) {
* if(BUF->type == HTONS(UIP_ETHTYPE_IP)) {
* uip_arp_ipin();
* uip_input(dev);
* if(dev->d_len > 0) {
* uip_arp_out();
* devicedriver_send();
* }
* } else if(BUF->type == HTONS(UIP_ETHTYPE_ARP)) {
* uip_arp_arpin();
* if(dev->d_len > 0) {
* devicedriver_send();
* }
* }
*/
extern void uip_input(struct uip_driver_s *dev);
/* Polling of connections
*
* These functions will traverse each active uIP connection structure and
* perform appropriate operatios: uip_timer() will perform TCP timer
* operations (and UDP polling operations); uip_poll() will perform TCP
* and UDP polling operations. The CAN driver MUST implement logic to
* periodically call uip_timer(); uip_poll() may be called asychronously
* from the network driver can accept another outgoing packet.
*
* In both cases, these functions will call the provided callback function
* for every active connection. Polling will continue until all connections
* have been polled or until the user-suplied function returns a non-zero
* value (which it should do only if it cannot accept further write data).
*
* When the callback function is called, there may be an outbound packet
* waiting for service in the uIP packet buffer, and if so the d_len field
* is set to a value larger than zero. The device driver should then send
* out the packet.
*
* Example:
* int driver_callback(struct uip_driver_dev *dev)
* {
* if (dev->d_len > 0)
* {
* devicedriver_send();
* return 1; <-- Terminates polling if necessary
* }
* return 0;
* }
*
* ...
* uip_poll(dev, driver_callback);
*
* Note: If you are writing a uIP device driver that needs ARP (Address
* Resolution Protocol), e.g., when running uIP over Ethernet, you will
* need to call the uip_arp_out() function in the callback function
* before sending the packet:
*
* int driver_callback(struct uip_driver_dev *dev)
* {
* if (dev->d_len > 0)
* {
* uip_arp_out();
* devicedriver_send();
* return 1; <-- Terminates polling if necessary
* }
* return 0;
* }
*/
typedef int (*uip_poll_callback_t)(struct uip_driver_s *dev);
extern int uip_poll(struct uip_driver_s *dev, uip_poll_callback_t callback);
extern int uip_timer(struct uip_driver_s *dev, uip_poll_callback_t callback, int hsec);
/* By defining UIP_ARCH_CHKSUM, the architecture can replace up_incr32
* with hardware assisted solutions.
*/
/* Carry out a 32-bit addition.
*
* op32 - A pointer to a 4-byte array representing a 32-bit
* integer in network byte order (big endian). This value may not
* be word aligned. The value pointed to by op32 is modified in place
*
* op16 - A 16-bit integer in host byte order.
*/
extern void uip_incr32(uint8_t *op32, uint16_t op16);
/* Calculate the Internet checksum over a buffer.
*
* The Internet checksum is the one's complement of the one's
* complement sum of all 16-bit words in the buffer.
*
* See RFC1071.
*
* Note: This function is not called in the current version of uIP,
* but future versions might make use of it.
*
* buf A pointer to the buffer over which the checksum is to be
* computed.
*
* len The length of the buffer over which the checksum is to
* be computed.
*
* Return: The Internet checksum of the buffer.
*/
extern uint16_t uip_chksum(uint16_t *buf, uint16_t len);
/* Calculate the IP header checksum of the packet header in d_buf.
*
* The IP header checksum is the Internet checksum of the 20 bytes of
* the IP header.
*
* Return: The IP header checksum of the IP header in the d_buf
* buffer.
*/
extern uint16_t uip_ipchksum(struct uip_driver_s *dev);
/* Calculate the TCP checksum of the packet in d_buf and d_appdata.
*
* The TCP checksum is the Internet checksum of data contents of the
* TCP segment, and a pseudo-header as defined in RFC793.
*
* Note: The d_appdata pointer that points to the packet data may
* point anywhere in memory, so it is not possible to simply calculate
* the Internet checksum of the contents of the d_buf buffer.
*
* Return: The TCP checksum of the TCP segment in d_buf and pointed
* to by d_appdata.
*/
extern uint16_t uip_tcpchksum(struct uip_driver_s *dev);
extern uint16_t uip_udpchksum(struct uip_driver_s *dev);
extern uint16_t uip_icmpchksum(struct uip_driver_s *dev, int len);
#endif /* __UIP_ARCH_H */