a2d986136d
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5439 42af7a65-404d-4744-a932-0658087f49c3
136 lines
7.2 KiB
Plaintext
136 lines
7.2 KiB
Plaintext
P112 README
|
|
===========
|
|
|
|
The P112 is notable because it was the first of the hobbyist single board
|
|
computers to reach the production stage. The P112 hobbyist computers
|
|
were relatively widespread and inspired other hobbyist centered home brew
|
|
computing projects such as N8VEM home brew computing project. The P112
|
|
project still maintains many devoted enthusiasts and has an online
|
|
repository of software and other information.
|
|
|
|
The P112 computer originated as a commercial product of "D-X Designs Pty
|
|
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
|
|
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
|
|
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
|
|
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
|
|
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
|
|
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
|
|
|
|
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
|
|
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
|
|
boards was discussed. David Griffith decided to produce additional P112 kits
|
|
with Dave Brooks blessing and the assistance of others. In addition Terry
|
|
Gulczynski makes additional P112 derivative hobbyist home brew computers.
|
|
Hal Bower was very active in the mid 1990's on the P112 project and ported
|
|
the "Banked/Portable BIOS".
|
|
|
|
Dave Brooks was successfully funded through Kickstarter for and another
|
|
run of P112 boards in November of 2012.
|
|
|
|
Pin Configuration
|
|
=================
|
|
|
|
The P112 is based on the 5V Z8018216FSG running at 16MHz. The Z8018216FSG
|
|
comes in a 100-pin QFP package:
|
|
|
|
PIN NAME
|
|
1 /INT0 INT0, pulled up, J1 DIN48 pin 13C
|
|
2 /INT1/PC6 FINTR, Floppy disk controller
|
|
3 /INT2/PC7 PINTR1, Floppy disk controller
|
|
4 ST ST, to AEN of Floppy disk controller
|
|
5 A0 A0-A12 Common memory bus
|
|
...
|
|
17 A12 " "
|
|
18 VSS ---
|
|
19 A13 A13-A17 Common memory bus
|
|
...
|
|
23 A17 " "
|
|
24 A18/TOUT A18 Common memory bus
|
|
25 VDD ---
|
|
26 A19 A19 Common memory bus
|
|
27 D0 D0-D4 Common memory bus
|
|
...
|
|
30 D3 " "
|
|
|
|
31 D4 D4-D7 Common memory bus
|
|
...
|
|
34 D7 " "
|
|
35 /RTS0/PB0 RTS0, 20-pin P14, pin 3
|
|
36 /CTS0/PB1 CTS0, pulled high (U16), 20-pin P14, pin 4
|
|
37 /DCD0/PB2 DCD0, pulled high (U16), 20-pin P14, pin 10
|
|
38 TXA0/PB3 TXA0, 20-pin P14, pin 8
|
|
39 RXA0/PB4 RXA0, pulled high (U17), 20-pin P14, pin 2
|
|
40 TXA1/PB5 TXA1, 20-pin P14, pin 1
|
|
41 RXA1/PB6 RXA1, pulled high (U17), 20-pin P14, pin 9
|
|
42 RXS//CTS1/PB7 CTS1, pulled high (U17), 20-pin P14, pin 7
|
|
43 CKA0//DREQ0 /DREQ0, DMA Request Select, 5-pin P2, pin 2
|
|
44 VSS ---
|
|
45 CKA1//TEND0 /TEND0, J1 DIN48 pin 14A
|
|
46 TXS//DTR//REQB//HINTR DTRB, 20-pin P14, pin 6
|
|
47 CKS//W//REQB//HTXRDY SIORQ, DMA Request Select, 5-pin P2, pin 5 (may be DREQ 0 or DREQ1)
|
|
48 /DREQ1 /DREQ1, DMA Request Select, 5-pin P2, pin 4
|
|
49 VDD ---
|
|
50 /TEND1//RTSB//HRXRDY NB /TEND1 = RTSB, 20-pin P14, pin 5; J1 DIN48 pin 14B
|
|
|
|
51 /RAMCS /RAMCS, Chip select logic (U11B); also J1 DIN48 pin 9B
|
|
52 /ROMCS /ROMCS, Chip select logic (P2); also J1 DIN48 pin 12B
|
|
53 EV1 Grounded
|
|
54 EV2 Grounded
|
|
55 PA0/HD0 IO, U6 DS1202 Serial Timekeeping chip
|
|
56 PA1/HD1 CLK, U6 DS1202 Serial Timekeeping chip
|
|
57 PA2/HD2 /RST, U6 DS1202 Serial Timekeeping chip
|
|
58 PA3/HD3 N/C
|
|
59 PA4/HD4 N/C
|
|
60 PA5/HD5 U12 NMF0512S, Isolated 1W regulated single output DC/DC converter
|
|
61 PA6/HD6 DSR, U7 LT1133, Advanced Low Power 5V RS232 Driver/Receiver
|
|
62 PA7/HD7 RTS, U7 LT1133, Advanced Low Power 5V RS232 Driver/Receiver
|
|
63 /W//REQA/PC5 WREQA, N/C
|
|
64 /DTR//REQA/PC3 DTRA, U7 LT1133, Advanced Low Power 5V RS232 Driver/Receiver
|
|
65 /MWR/PC2//RTSA /MWR, Common memory bus signal
|
|
66 /CTSA/PC1 CTSA, U7 LT1133, Advanced Low Power 5V RS232 Driver/Receiver
|
|
67 /DCDA/PC0 DCDA, U7 LT1133, Advanced Low Power 5V RS232 Driver/Receiver
|
|
68 /SYNCA/PC4 SYNCA, U7 LT1133, Advanced Low Power 5V RS232 Driver/Receiver
|
|
69 /RTXCA ?
|
|
70 VSS ---
|
|
71 /IOCS/IEO /IOCS, Logic circuit with M1, generates LIVE which conditions inputs
|
|
to the floppy disk controller
|
|
72 IEI IEI, J1 DIN48 pin 14C
|
|
73 VDD ---
|
|
74 RXDA RXDA, U7 LT1133, Advanced Low Power 5V RS232 Driver/Receiver
|
|
75 /TRXCA ?
|
|
76 TXDA TXDA, U7 LT1133, Advanced Low Power 5V RS232 Driver/Receiver
|
|
77 /DCDB//HRD DCDB, pulled high (U16), 20-pin P14, pin 12
|
|
78 /CTSB//HWR DCDB, pulled high (U17), 20-pin P14, pin 11
|
|
79 TXDB//HDDIS TXDB, 20-pin P14, pin 14
|
|
80 /TRXCB/HA0 TRXCB, pulled high (U17), 20-pin P14, pin 15
|
|
|
|
81 RXDB/HA1 RXDB, pulled high (U16), 20-pin P14, pin 16
|
|
82 /RTXCB/HA2 RTXCB, pulled high (U17), 20-pin P14, pin 17
|
|
83 /SYNCB//HCS SYNCB, pulled high (U16), 20-pin P14, pin 18
|
|
84 /HALT ?
|
|
85 /RFSH ?
|
|
86 /IORQ /IORQ, J1 DIN48 pin 12A
|
|
87 /MRD//MREQ /MRD, Common memory bus signal
|
|
88 E E, Conditions inputs to floppy disk controller; also J1 DIN48 pin 13B
|
|
89 /M1 /M1, Logic circuit with /IOCS, generates LIVE which conditions inputs
|
|
to the floppy disk controller; also J1 DIN48 pin 11A
|
|
90 /WR /WR, Common memory bus; Conditions inputs to floppy disk controller;
|
|
also J1 DIN48 pin 12C
|
|
91 /RD /RD, J1 DIN48 pin 11C
|
|
92 PHI PHI, J1 DIN48 pin 15B
|
|
93 VSS ---
|
|
94 XTAL 16 MHz XTAL
|
|
95 EXTAL 16 MHz XTAL
|
|
96 /WAIT /WAIT, J1 DIN48 pin 11B
|
|
97 /BUSACK ?
|
|
98 /BUSREQ /BUSREQ, Pulled high
|
|
99 /RESET /RST (to lots of places)
|
|
100 /NMI /NMI, Pulled high
|
|
|
|
P112 Serial Console
|
|
===================
|
|
|
|
The UARTs are not used on the P112 board (the UART signals are avaiable off-board through P14).
|
|
The serial console is provided by U7 LT1133, Advanced Low Power 5V RS232 Driver/Receiver
|
|
that connects to the P112 via the Z85230 ESCC channel A.
|