0dc41ff4ba
arm: codestyle fixes 4
* arm: max326xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: moxart: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: nrf52: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: nuc1xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: xmc4: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: tms570: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: str71x: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
185 lines
6.5 KiB
C
185 lines
6.5 KiB
C
/****************************************************************************
|
|
* boards/arm/str71x/olimex-strp711/include/board.h
|
|
*
|
|
* Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Features:
|
|
*
|
|
* - MCU: STR711FR2T6 16/32 bit ARM7TDMI™ with 256K Bytes Program Flash,
|
|
* 64K Bytes RAM, USB 2.0, RTC, 12 bit ADC, 4x UARTs, 2x I2C,2x SPI,
|
|
* 5x 32bit TIMERS, 2x PWM, 2x CCR, WDT, up to 50MHz operation
|
|
* - Standard JTAG connector with ARM 2x10 pin layout for programming/
|
|
* debugging with ARM-JTAG
|
|
* - USB connector
|
|
* - Two channel RS232 interface and drivers
|
|
* - SD/MMC card connector
|
|
* - Two buttons
|
|
* - Trimpot connected to ADC
|
|
* - Two status LEDs
|
|
* - Buzzer
|
|
* - UEXT - 10 pin extension connector for Olimex addon peripherials like MP3,
|
|
* RF2.4Ghz, RFID etc. modules
|
|
* - 2x SPI connectors
|
|
* - I2C connector
|
|
* - On board voltage regulator 3.3V with up to 800mA current
|
|
* - Single power supply: 6V AC or DC required, USB port can power the board
|
|
* - Power supply LED
|
|
* - Power supply filtering capacitor
|
|
* - RESET circuit
|
|
* - RESET button
|
|
* - 4 Mhz crystal oscillator
|
|
* - 32768 Hz crystal and RTC
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __BOARDS_ARM_STR71X_OLIMEX_STRP711_INCLUDE_BOARD_H
|
|
#define __BOARDS_ARM_STR71X_OLIMEX_STRP711_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
#include "chip.h"
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* Main Oscillator Frequency = 4MHz */
|
|
|
|
#define STR71X_RCCU_MAIN_OSC (4000000)
|
|
|
|
/* RTC Oscillator Frequency = 32,768 Hz */
|
|
|
|
#define STR71X_RCCU_RTC_OSC (32768)
|
|
|
|
/* HCLK driving PLL2 */
|
|
|
|
#define STR71X_PCU_HCLK_OSC (4000000) /* ? */
|
|
|
|
/* PLL1 Setup:
|
|
*
|
|
* PLL1 input clock: CLK2 = Main OSC = 4MHz
|
|
* PLL1 output clock: PLL1OUT = 16 * CLK2 / 2 = 32MHz
|
|
* PLL1 output: CLK3 = PLL1OUT = 32MHz (hard coded selection)
|
|
* RCLK = CLK3 = 32MHz (hard coded selection)
|
|
* APB1 peripheral clock: PCLK1 = RCLK = 32MHz
|
|
* APB2 peripheral clock: PCLK2 = RCLK = 32MHz
|
|
* Main system clock: MCLK = RCLK = 32MHz
|
|
*/
|
|
|
|
#undef STR71X_PLL1IN_DIV2 /* Don't divide main OSC by two */
|
|
#define STR71X_PLL1OUT_MUL 16 /* PLL1OUT = 16 * CLK2 */
|
|
#define STR71X_PLL1OUT_DIV 2 /* PLL1OUT = CLK2 / 2 */
|
|
#define STR71X_APB1_DIV 1 /* PCLK1 = RCLK */
|
|
#define STR71X_APB2_DIV 1 /* PCLK2 = RCLK */
|
|
#define STR71X_MCLK_DIV 1 /* MCLK = RCLK */
|
|
|
|
/* PLL2 Setup -- only needed for HDLC or USB
|
|
*
|
|
* USB input: USB clock
|
|
* HCLK = 4MHz?
|
|
* USB clock = 12 * HCLK / 1 = 48 MHz
|
|
*/
|
|
|
|
#undef STR71X_USBIN_PLL2 /* USB input is USB clock */
|
|
#define STR71X_PLL2OUT_MUL 12 /* PLL2OUT = 12 * HCLK */
|
|
#define STR71X_PLL2OUT_DIV 1 /* PLL2OUT = HCLK / 1 */
|
|
|
|
/* LED definitions **********************************************************/
|
|
|
|
/* The Olimex board has only two LEDs, so following states are faked as
|
|
* follows
|
|
*
|
|
* SET CLEAR
|
|
* LED_STARTED (none) (n/a)
|
|
* LED_HEAPALLOCATE LED1 (n/a)
|
|
* LED_IRQSENABLED LED1 (n/a)
|
|
* LED_STACKCREATED LED1 (n/a)
|
|
* LED_INIRQ LED1+LED2 LED1
|
|
* LED_SIGNAL LED1+LED2 LED1
|
|
* LED_ASSERTION LED1+LED2 LED1
|
|
* LED_PANIC LED1+LED2* LED1
|
|
*
|
|
* *The previous state of LED2 will be retained
|
|
*/
|
|
|
|
#define LED_STARTED 0
|
|
#define LED_HEAPALLOCATE 1
|
|
#define LED_IRQSENABLED 2
|
|
#define LED_STACKCREATED 3
|
|
#define LED_INIRQ 4
|
|
#define LED_SIGNAL 5
|
|
#define LED_ASSERTION 6
|
|
#define LED_PANIC 7
|
|
|
|
/* Button definitions *******************************************************/
|
|
|
|
/* The Olimex board has two buttons,
|
|
* one labled "BUT" and the other "WAKEUP"
|
|
*/
|
|
|
|
#define BUT_BUTTON 1 /* Bit 0: BUT button is depressed */
|
|
#define WAKEUP_BUTTON 2 /* Bit 1: WAKEUP button is depressed */
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#ifdef __cplusplus
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
#undef EXTERN
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#endif /* __BOARDS_ARM_STR71X_OLIMEX_STRP711_INCLUDE_BOARD_H */
|