807 lines
24 KiB
C
807 lines
24 KiB
C
/****************************************************************************
|
|
* arch/arm/src/cxd56xx/cxd56_pmic.h
|
|
*
|
|
* Copyright 2018 Sony Semiconductor Solutions Corporation
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name of Sony Semiconductor Solutions Corporation nor
|
|
* the names of its contributors may be used to endorse or promote
|
|
* products derived from this software without specific prior written
|
|
* permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __ARCH_ARM_SRC_CXD56XX_CXD56_PMIC_H
|
|
#define __ARCH_ARM_SRC_CXD56XX_CXD56_PMIC_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <sys/types.h>
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* PMIC Register Definitions */
|
|
|
|
#define PMIC_REG_DDC_ANA1 (0x26)
|
|
#define PMIC_REG_CNT_USB2 (0x81)
|
|
|
|
/* PMIC DDC_ANA1 Definitions */
|
|
|
|
#define PMIC_PM_HIZ (2u << 4)
|
|
#define PMIC_PM_DEF (0u << 4)
|
|
#define PMIC_IOST_DEF (2u << 2)
|
|
#define PMIC_IOMAX_DEF (2u << 0)
|
|
|
|
/* PMIC CNT_USB2 Definitions */
|
|
|
|
#define PMIC_SET_CHGOFF (1u << 2)
|
|
|
|
/* PMIC Interrupt Status Definitions */
|
|
|
|
#define PMIC_INT_ALARM (1u << 0)
|
|
#define PMIC_INT_WKUPS (1u << 1)
|
|
#define PMIC_INT_WKUPL (1u << 2)
|
|
#define PMIC_INT_VSYS (1u << 3)
|
|
|
|
/* PMIC GPO Channel Definitions */
|
|
|
|
#define PMIC_GPO0 (1u << 0)
|
|
#define PMIC_GPO1 (1u << 1)
|
|
#define PMIC_GPO2 (1u << 2)
|
|
#define PMIC_GPO3 (1u << 3)
|
|
#define PMIC_GPO4 (1u << 4)
|
|
#define PMIC_GPO5 (1u << 5)
|
|
#define PMIC_GPO6 (1u << 6)
|
|
#define PMIC_GPO7 (1u << 7)
|
|
|
|
/* PMIC LoadSwitch Channel Definitions */
|
|
|
|
#define PMIC_LOADSW2 (1u << 2)
|
|
#define PMIC_LOADSW3 (1u << 3)
|
|
#define PMIC_LOADSW4 (1u << 4)
|
|
|
|
/* PMIC DDC/LDO Channel Definitions */
|
|
|
|
#define PMIC_DDC_IO (1u << 0)
|
|
#define PMIC_LDO_EMMC (1u << 1)
|
|
#define PMIC_DDC_ANA (1u << 2)
|
|
#define PMIC_LDO_ANA (1u << 3)
|
|
#define PMIC_DDC_CORE (1u << 4)
|
|
#define PMIC_LDO_PERI (1u << 5)
|
|
|
|
/* Charge mode for both of low/high temperature */
|
|
|
|
#define PMIC_CHGMODE_ON 0x00
|
|
#define PMIC_CHGMODE_OFF 0x01
|
|
#define PMIC_CHGMODE_WEAK 0x02
|
|
|
|
/* Charge status */
|
|
|
|
#define PMIC_STAT_INIT_RST 0
|
|
#define PMIC_STAT_INIT_WAIT 1
|
|
#define PMIC_STAT_INIT_CHK 2
|
|
#define PMIC_STAT_DBP_START 3
|
|
#define PMIC_STAT_DB_INICHARGE 4
|
|
#define PMIC_STAT_DB_PRECHARGE 5
|
|
#define PMIC_STAT_DCON_WAIT 6
|
|
#define PMIC_STAT_PD_START 7
|
|
#define PMIC_STAT_DM_COMPARE 8
|
|
#define PMIC_STAT_PD_END 9
|
|
#define PMIC_STAT_BAT_WAIT 10
|
|
#define PMIC_STAT_CHG_STOP 11
|
|
#define PMIC_STAT_GB_PRECHARGE 12
|
|
#define PMIC_STAT_GB_QCKCHARGE 13
|
|
#define PMIC_STAT_GB_LOWCHARGE 14
|
|
#define PMIC_STAT_GB_HIGHCHARGE 15
|
|
#define PMIC_STAT_CHG_JUDGE 16
|
|
#define PMIC_STAT_CHG_COMPLETE 17
|
|
#define PMIC_STAT_GB_CONWAIT 18
|
|
#define PMIC_STAT_GB_CPTEMPWAIT1 19
|
|
#define PMIC_STAT_GB_CPTEMPWAIT2 20
|
|
#define PMIC_STAT_GB_TEMPWAIT 21
|
|
#define PMIC_STAT_DB_TEMPWAIT 22
|
|
#define PMIC_STAT_DB_CONWAIT 23
|
|
#define PMIC_STAT_BAT_UNUSUAL 24
|
|
#define PMIC_STAT_BAT_DISCON 25
|
|
|
|
/****************************************************************************
|
|
* Public Types
|
|
****************************************************************************/
|
|
|
|
struct pmic_gauge_s
|
|
{
|
|
int voltage;
|
|
int current;
|
|
int temp;
|
|
};
|
|
|
|
struct pmic_temp_table_s
|
|
{
|
|
int T60;
|
|
int T45;
|
|
int T10;
|
|
int T00;
|
|
};
|
|
|
|
struct pmic_mon_s
|
|
{
|
|
int on;
|
|
int interval;
|
|
int threshold_volt;
|
|
int threshold_current;
|
|
};
|
|
|
|
struct pmic_mon_status_s
|
|
{
|
|
int brun;
|
|
int index;
|
|
int latest;
|
|
int total_watt;
|
|
int total_time;
|
|
};
|
|
|
|
struct pmic_mon_set_s
|
|
{
|
|
int clearbuf;
|
|
int clearsum;
|
|
};
|
|
|
|
struct pmic_mon_rec_s
|
|
{
|
|
uint16_t index;
|
|
uint16_t timestamp;
|
|
uint16_t voltage;
|
|
int16_t current;
|
|
};
|
|
|
|
struct pmic_mon_log_s
|
|
{
|
|
FAR struct pmic_monitor_rec_s *rec;
|
|
int index;
|
|
int size;
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Public Data
|
|
****************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_get_interrupt_status
|
|
*
|
|
* Description:
|
|
* Get Raw Interrupt Status register. And furthermore, if status is set,
|
|
* then clear the interrupt. Register's description is below:
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* +---------------+-----+-----+-----+-----+
|
|
* | x x x x |VSYS |WKUPL|WKUPS|ALARM| target of status
|
|
* +---------------+-----+-----+-----+-----+
|
|
*
|
|
* Input Parameter:
|
|
* status - a pointer to the polled value of interrupt status
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
* status - return the value of interrupt status register
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_get_interrupt_status(FAR uint8_t *status);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_set_gpo_reg
|
|
*
|
|
* Description:
|
|
* Set GPO register. Register's description is below:
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* +---+---+---+---+---+---+---+---+
|
|
* |CH3|CH2|CH1|CH0|CH3|CH2|CH1|CH0| target of setbit0/clrbit0
|
|
* +---+---+---+---+---+---+---+---+
|
|
* +---+---+---+---+---+---+---+---+
|
|
* |CH7|CH6|CH5|CH4|CH7|CH6|CH5|CH4| target of setbit1/clrbit1
|
|
* +---+---+---+---+---+---+---+---+
|
|
* |<- 0: Hi-Z ->|<- 0: Low ->|
|
|
* |<- 1: Output ->|<- 1: High ->|
|
|
*
|
|
* Input Parameter:
|
|
* setbitX - set bit that 1 is set
|
|
* clrbitX - clear bit that 1 is set
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
* setbitX - return the current value of register
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_set_gpo_reg(FAR uint8_t *setbit0, FAR uint8_t *clrbit0,
|
|
FAR uint8_t *setbit1, FAR uint8_t *clrbit1);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_set_gpo
|
|
*
|
|
* Description:
|
|
* Set High/Low to the specified GPO channel(s)
|
|
*
|
|
* Input Parameter:
|
|
* chset - GPO Channel number(s)
|
|
* value - true if output high, false if output low.
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_set_gpo(uint8_t chset, bool value);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_set_gpo_hiz
|
|
*
|
|
* Description:
|
|
* Set Hi-Z to the specified GPO channel(s)
|
|
*
|
|
* Input Parameter:
|
|
* chset - GPO Channel number(s)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_set_gpo_hiz(uint8_t chset);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_get_gpo
|
|
*
|
|
* Description:
|
|
* Get the value from the specified GPO channel(s)
|
|
*
|
|
* Input Parameter:
|
|
* chset : GPO Channel number(s)
|
|
*
|
|
* Returned Value:
|
|
* Return true if all of the specified chset are high. Else, return false
|
|
*
|
|
****************************************************************************/
|
|
|
|
bool cxd56_pmic_get_gpo(uint8_t chset);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_set_loadswitch_reg
|
|
*
|
|
* Description:
|
|
* Set LoadSwitch register. Register's description is below:
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* +---+---+---+---+---+---+---+---+
|
|
* | - | - | - |CH4|CH3|CH2| 1 | 1 | target of setbit/clrbit
|
|
* +---+---+---+---+---+---+---+---+
|
|
* |<- 0: Off->|
|
|
* |<- 1: On ->|
|
|
*
|
|
* Input Parameter:
|
|
* setbit - set bit that 1 is set
|
|
* clrbit - clear bit that 1 is set
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
* setbit - return the current value of register
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_set_loadswitch_reg(FAR uint8_t *setbit, FAR uint8_t *clrbit);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_set_loadswitch
|
|
*
|
|
* Description:
|
|
* Set On/Off to the specified LoadSwitch channel(s)
|
|
*
|
|
* Input Parameter:
|
|
* chset - LoadSwitch Channel number(s)
|
|
* value - true if set on, false if set off.
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_set_loadswitch(uint8_t chset, bool value);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_get_loadswitch
|
|
*
|
|
* Description:
|
|
* Get the value from the specified LoadSwitch channel(s)
|
|
*
|
|
* Input Parameter:
|
|
* chset - LoadSwitch Channel number(s)
|
|
*
|
|
* Returned Value:
|
|
* Return true if all of the specified chset are on. Otherwise, return false
|
|
*
|
|
****************************************************************************/
|
|
|
|
bool cxd56_pmic_get_loadswitch(uint8_t chset);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_set_ddc_ldo_reg
|
|
*
|
|
* Description:
|
|
* Set DDC/LDO register. Register's description is below:
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* +----+----+----+----+----+----+----+----+
|
|
* | | |LDO |DDC |LDO |DDC |LDO |DDC | target of setbit/clrbit
|
|
* | - | - |PERI|CORE|ANA |ANA |EMMC|IO |
|
|
* +----+----+----+----+----+----+----+----+
|
|
* |<- 0: Off ->|
|
|
* |<- 1: On ->|
|
|
*
|
|
* Input Parameter:
|
|
* setbit - set bit that 1 is set
|
|
* clrbit - clear bit that 1 is set
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
* setbit - return the current value of register
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_set_ddc_ldo_reg(FAR uint8_t *setbit, FAR uint8_t *clrbit);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_set_ddc_ldo
|
|
*
|
|
* Description:
|
|
* Set On/Off to the specified DDC/LDO channel(s)
|
|
*
|
|
* Input Parameter:
|
|
* chset - DDC/LO Channel number(s)
|
|
* value - true if set on, false if set off.
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_set_ddc_ldo(uint8_t chset, bool value);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_get_ddc_ldo
|
|
*
|
|
* Description:
|
|
* Get the value from the specified DDC/LDO channel(s)
|
|
*
|
|
* Input Parameter:
|
|
* chset - DDC/LDO Channel number(s)
|
|
*
|
|
* Returned Value:
|
|
* Return true if all of the specified chset are on. Otherwise, return false
|
|
*
|
|
****************************************************************************/
|
|
|
|
bool cxd56_pmic_get_ddc_ldo(uint8_t chset);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_get_gauge
|
|
*
|
|
* Description:
|
|
* Get the set of values (gauge, voltage, current and temperature) from
|
|
* PMIC.
|
|
*
|
|
* Input Parameter:
|
|
* gauge - Set of gauge values
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_get_gauge(FAR struct pmic_gauge_s *gauge);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_getlowervol
|
|
*
|
|
* Description:
|
|
* Get lower limit of voltage for system to be running.
|
|
*
|
|
* Input Parameter:
|
|
* voltage - Lower limit voltage (mV)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_getlowervol(FAR int *voltage);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_setlowervol
|
|
*
|
|
* Description:
|
|
* Set lower limit of voltage for system to be running.
|
|
*
|
|
* Input Parameter:
|
|
* voltage - Lower limit voltage (mV)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_setlowervol(int voltage);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_getnotifyvol
|
|
*
|
|
* Description:
|
|
* Get voltage for the low battery notification
|
|
*
|
|
* Input Parameter:
|
|
* voltage - Low battery voltage (mV)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_getnotifyvol(FAR int *voltage);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_setnotifyvol
|
|
*
|
|
* Description:
|
|
* Set voltage for the low battery notification
|
|
*
|
|
* Input Parameter:
|
|
* voltage - Low battery voltage (mV)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_setnotifyvol(int voltage);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_getchargevol
|
|
*
|
|
* Description:
|
|
* Get charge voltage
|
|
*
|
|
* Input Parameter:
|
|
* voltage - Possible values are every 50 between 4000 to 4400 (mV)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_getchargevol(FAR int *voltage);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_setchargevol
|
|
*
|
|
* Description:
|
|
* Set charge voltage
|
|
*
|
|
* Input Parameter:
|
|
* voltage - Available values are every 50 between 4000 to 4400 (mV)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_setchargevol(int voltage);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_getchargecurrent
|
|
*
|
|
* Description:
|
|
* Get charge current value
|
|
*
|
|
* Input Parameter:
|
|
* current - Possible values are 2, 100 and 500 (mA). However,
|
|
* 2 means 2.5 mA actually.
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_getchargecurrent(FAR int *current);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_setchargecurrent
|
|
*
|
|
* Description:
|
|
* Set charge current value
|
|
*
|
|
* Input Parameter:
|
|
* current - Available values are 2, 100 and 500 (mA). However, 2 means
|
|
* 2.5 mA actually.
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_setchargecurrent(int current);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_getporttype
|
|
*
|
|
* Description:
|
|
* Get USB port type
|
|
*
|
|
* Input Parameter:
|
|
* porttype - PMIC_PORTTYPE_SDP or PMIC_PORTTYPE_DCPCDP
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_getporttype(FAR int *porttype);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_getchargestate
|
|
*
|
|
* Description:
|
|
* Read charging status
|
|
*
|
|
* Input Parameter:
|
|
* state - Charging status (see PMIC_STAT_* definitions)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_getchargestate(FAR uint8_t *state);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_setrechargevol
|
|
*
|
|
* Description:
|
|
* Set threshold voltage against full charge for automatic restart charging.
|
|
*
|
|
* Input Parameter:
|
|
* mV - Available values are -400, -350, -300 and -250 (mV)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_setrechargevol(int mv);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_getrechargevol
|
|
*
|
|
* Description:
|
|
* Get threshold voltage against full charge for automatic restart charging.
|
|
*
|
|
* Input Parameter:
|
|
* mV - Possible values are -400, -350, -300 and -250 (mV)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_getrechargevol(FAR int *mv);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_setchargecompcurrent
|
|
*
|
|
* Description:
|
|
* Set current value setting for determine fully charged.
|
|
*
|
|
* Input Parameter:
|
|
* current - Possible values are 50, 40, 30, 20 and 10 (mA)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_setchargecompcurrent(int current);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_getchargecompcurrent
|
|
*
|
|
* Description:
|
|
* Get current value setting for determine fully charged.
|
|
*
|
|
* Input Parameter:
|
|
* current - Available values are 50, 40, 30, 20 and 10 (mA)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_getchargecompcurrent(FAR int *current);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_gettemptable
|
|
*
|
|
* Description:
|
|
* Get temperature detect resistance table
|
|
*
|
|
* Input Parameter:
|
|
* table - Settings values for temperature detecting (see CXD5247GF
|
|
* specification for more detail)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_gettemptable(FAR struct pmic_temp_table_s *table);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_settemptable
|
|
*
|
|
* Description:
|
|
* Set temperature detect resistance table
|
|
*
|
|
* Input Parameter:
|
|
* table - Settings values for temperature detecting (see CXD5247GF
|
|
* specification for more detail)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_settemptable(FAR struct pmic_temp_table_s *table);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_setchargemode
|
|
*
|
|
* Description:
|
|
* Set charging mode in each low/high temperatures.
|
|
* In lower than 10 degrees Celsius, charging mode will be changed on/off
|
|
* and weak (half of charge current) according to setting.
|
|
* In higher than 45 degrees Celsius, charging mode will be charged on/off
|
|
* and weak (-0.15V from charge voltage) according to setting.
|
|
*
|
|
* Input Parameter:
|
|
* low - Charging mode in low temperature (see PMIC_CHGMODE_*)
|
|
* high - Charging mode in high temperature (see PMIC_CHGMODE_*)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_setchargemode(int low, int high);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_getchargemode
|
|
*
|
|
* Description:
|
|
* Get charging mode in each low/high temperatures.
|
|
* In lower than 10 degrees Celsius, charging mode will be changed on/off
|
|
* and weak (half of charge current) according to setting.
|
|
* In higher than 45 degrees Celsius, charging mode will be charged on/off
|
|
* and weak (-0.15V from charge voltage) according to setting.
|
|
*
|
|
* Input Parameter:
|
|
* low - Charging mode in low temperature (see PMIC_CHG_*)
|
|
* high - Charging mode in high temperature (see PMIC_CHG_*)
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_getchargemode(FAR int *low, FAR int *high);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_read
|
|
*
|
|
* Description:
|
|
* Read the value from the specified sub address
|
|
*
|
|
* Input Parameter:
|
|
* addr - sub address
|
|
* buf - pointer to read buffer
|
|
* size - byte count of read
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_read(uint8_t addr, FAR void *buf, uint32_t size);
|
|
|
|
/****************************************************************************
|
|
* Name: cxd56_pmic_write
|
|
*
|
|
* Description:
|
|
* Write the value to the specified sub address
|
|
*
|
|
* Input Parameter:
|
|
* addr - sub address
|
|
* buf - pointer to write buffer
|
|
* size - byte count of write
|
|
*
|
|
* Returned Value:
|
|
* Return 0 on success. Otherwise, return a negated errno.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int cxd56_pmic_write(uint8_t addr, FAR void *buf, uint32_t size);
|
|
|
|
/****************************************************************************
|
|
* Battery monitor for debug
|
|
****************************************************************************/
|
|
|
|
#ifdef CONFIG_CXD56_PMIC_BATMONITOR
|
|
int cxd56_pmic_monitor_enable(FAR struct pmic_mon_s *ptr);
|
|
int cxd56_pmic_monitor_status(FAR struct pmic_mon_status_s *ptr);
|
|
int cxd56_pmic_monitor_set(FAR struct pmic_mon_set_s *ptr);
|
|
int cxd56_pmic_monitor_get(FAR struct pmic_mon_log_s *ptr);
|
|
#else
|
|
#define cxd56_pmic_monitor_enable(ptr)
|
|
#define cxd56_pmic_monitor_status(ptr)
|
|
#define cxd56_pmic_monitor_set(ptr)
|
|
#define cxd56_pmic_monitor_get(ptr)
|
|
#endif
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __ARCH_ARM_SRC_CXD56XX_CXD56_PMIC_H */
|