nuttx/boards/arm/am335x/beaglebone-black/src/beaglebone-black.h
Xiang Xiao b12f588140 Rename CONFIG_LIB_BOARDCTL to CONFIG_BOARDCTL
since boardctl isn't a libc feature

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-06 13:58:26 +02:00

151 lines
5.9 KiB
C

/****************************************************************************
* boards/arm/am335x/beaglebone-black/src/beaglebone-black.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_BEAGLEBONE_BLACK_SRC_BEAGLEBONE_BLACK_H
#define __BOARDS_ARM_BEAGLEBONE_BLACK_SRC_BEAGLEBONE_BLACK_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
#include <arch/irq.h>
#include <nuttx/irq.h>
#include "am335x_gpio.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* LCD **********************************************************************/
#define HAVE_LCD 1
#define HAVE_TDA19988 1
#if !defined(CONFIG_AM335X_LCDC) || !defined(CONFIG_VIDEO_EDID)
# undef HAVE_LCD
# undef HAVE_TDA19988
#elif !defined(CONFIG_LCD_TDA19988) || !defined(CONFIG_AM335X_I2C2)
# undef HAVE_TDA19988
# if !defined(CONFIG_BEAGLEBONE_VIDEOMODE)
# define CONFIG_BEAGLEBONE_VIDEOMODE "640x480x60"
# endif
#endif
#if defined(HAVE_LCD)
# define TDA19988_I2CBUS 2
# define TDA19988_HDMI_I2CADDR 0x70
# define TDA19988_CEC_I2CADDR 0x34
# define TDA19988_I2CFREQUENCY 400000
#endif
/* LEDs *********************************************************************/
/* The beaglebone black has four user LEDs; all four can be controlled from
* software.
* All are tied to ground and, hence, illuminated by driving the output pins
* to a high value:
*
* 1. LED0 GPMC_A5 GPMC_A5/GMII2_TXD0/RGMII2_TD0/RMII2_TXD0/GPMC_A21/
* PR1_MII1_RXD3/eQEP1B_IN/GPIO1_21
* 2. LED1 GPMC_A6 GPMC_A6/GMII2_TXCLK/RGMII2_TCLK/MMC2_DAT4/GPMC_A22/
* PR1_MII1_RXD2/eQEP1_INDEX/GPIO1_22
* 3. LED2 GPMC_A7 GPMC_A7/GMII2_RXCLK/RGMII2_RCLK/MMC2_DAT5/GPMC_A23/
* PR1_MII1_RXD1/eQEP1_STROBE/GPIO1_23
* 4. LED3 GPMC_A8 GPMC_A8/GMII2_RXD3/RGMII2_RD3/MMC2_DAT6/GPMC_A24/
* PR1_MII1_RXD0/MCASP0_ACLKX/GPIO1_24
*/
#define GPIO_LED0 (GPIO_OUTPUT | GPIO_OUTPUT_ZERO | GPIO_PORT1 | GPIO_PIN21)
#define GPIO_LED1 (GPIO_OUTPUT | GPIO_OUTPUT_ZERO | GPIO_PORT1 | GPIO_PIN22)
#define GPIO_LED2 (GPIO_OUTPUT | GPIO_OUTPUT_ZERO | GPIO_PORT1 | GPIO_PIN23)
#define GPIO_LED3 (GPIO_OUTPUT | GPIO_OUTPUT_ZERO | GPIO_PORT1 | GPIO_PIN24)
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
* defined. In that case, the usage by the board port is defined in
* include/board.h and src/am335x_leds.c.
* The LEDs are used to encode OS-related events as follows:
*
* SYMBOL Meaning LED state
* LED1 LED3 LED4
* ----------------- ----------------------- ---- ---- ---- ------------
* LED_STARTED NuttX has been started ON OFF OFF
* LED_HEAPALLOCATE Heap has been allocated OFF ON OFF
* LED_IRQSENABLED Interrupts enabled ON ON OFF
* LED_STACKCREATED Idle stack created ON ON OFF
* LED_INIRQ In an interrupt N/C N/C Soft glow
* LED_SIGNAL In a signal handler N/C N/C Soft glow
* LED_ASSERTION An assertion failed N/C N/C Soft glow
* LED_PANIC The system has crashed N/C N/C 2Hz Flashing
* LED_IDLE MCU is is sleep mode Not used
*
* After booting, LED1 and 3 are not longer used by the system and can be
* used for other purposes by the application (Of course, all LEDs are
* available to the application if CONFIG_ARCH_LEDS is not defined.
*/
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Functions Definitions
****************************************************************************/
/****************************************************************************
* Name: am335x_bringup
*
* Description:
* Perform architecture-specific initialization
*
* CONFIG_BOARD_LATE_INITIALIZE=y :
* Called from board_late_initialize().
*
* CONFIG_BOARD_LATE_INITIALIZE=n && CONFIG_BOARDCTL=y :
* Called from the NSH library
*
****************************************************************************/
int am335x_bringup(void);
/****************************************************************************
* Name: am335x_led_initialize
*
* Description:
* Configure LEDs. LEDs are left in the OFF state.
*
****************************************************************************/
void am335x_led_initialize(void);
#endif /* __ASSEMBLY__ */
#endif /* __BOARDS_ARM_BEAGLEBONE_BLACK_SRC_BEAGLEBONE_BLACK_H */