sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ceb415204e
nuttx/drivers/ioexpander/pca9555.c

641 lines
18 KiB
C
Raw Blame History

/****************************************************************************
* drivers/ioexpander/pca9555.c
*
* Copyright (C) 2015, 2016 Gregory Nutt. All rights reserved.
* Author: Sebastien Lorquet <sebastien@lorquet.fr>
*
* References:
* "16-bit I2C-bus and SMBus I/O port with interrupt product datasheet",
* Rev. 08 - 22 October 2009, NXP
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/irq.h>
#include <nuttx/i2c/i2c_master.h>
#include <nuttx/kmalloc.h>
#include <nuttx/ioexpander/ioexpander.h>
#include "pca9555.h"
#if defined(CONFIG_IOEXPANDER_PCA9555)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef CONFIG_I2C
# warning I2C support is required (CONFIG_I2C)
#endif
#ifndef CONFIG_I2C_TRANSFER
# warning Support of the I2C transfer() method is required (CONFIG_I2C_TRANSFER)
#endif
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static inline int pca9555_write(FAR struct pca9555_dev_s *pca,
FAR const uint8_t *wbuffer, int wbuflen);
static inline int pca9555_writeread(FAR struct pca9555_dev_s *pca,
FAR const uint8_t *wbuffer, int wbuflen, FAR uint8_t *rbuffer,
int rbuflen);
static int pca9555_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin,
int dir);
static int pca9555_option(FAR struct ioexpander_dev_s *dev, uint8_t pin,
int opt, void *val);
static int pca9555_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin,
bool value);
static int pca9555_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin,
FAR bool *value);
static int pca9555_readbuf(FAR struct ioexpander_dev_s *dev, uint8_t pin,
FAR bool *value);
#ifdef CONFIG_IOEXPANDER_MULTIPIN
static int pca9555_multiwritepin(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values, int count);
static int pca9555_multireadpin(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values, int count);
static int pca9555_multireadbuf(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values, int count);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#ifndef CONFIG_PCA9555_MULTIPLE
/* If only a single PCA9555 device is supported, then the driver state
* structure may as well be pre-allocated.
*/
static struct pca9555_dev_s g_pca9555;
/* Otherwise, we will need to maintain allocated driver instances in a list */
#else
static struct pca9555_dev_s *g_pca9555list;
#endif
static const struct ioexpander_ops_s g_pca9555_ops =
{
pca9555_direction,
pca9555_option,
pca9555_writepin,
pca9555_readpin,
pca9555_readbuf,
#ifdef CONFIG_IOEXPANDER_MULTIPIN
pca9555_multiwritepin,
pca9555_multireadpin,
pca9555_multireadbuf,
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: pca9555_writeread
*
* Description:
* Write to then read from the I2C device.
*
****************************************************************************/
static inline int pca9555_write(FAR struct pca9555_dev_s *pca,
FAR const uint8_t *wbuffer, int wbuflen)
{
struct i2c_config_s config;
/* Set up the configuration and perform the write-read operation */
config.frequency = pca->config->frequency;
config.address = pca->config->address;
config.addrlen = 7;
return i2c_write(pca->i2c, &config, wbuffer, wbuflen);
}
/****************************************************************************
* Name: pca9555_writeread
*
* Description:
* Write to then read from the I2C device.
*
****************************************************************************/
static inline int pca9555_writeread(FAR struct pca9555_dev_s *pca,
FAR const uint8_t *wbuffer, int wbuflen,
FAR uint8_t *rbuffer, int rbuflen)
{
struct i2c_config_s config;
/* Set up the configuration and perform the write-read operation */
config.frequency = pca->config->frequency;
config.address = pca->config->address;
config.addrlen = 7;
return i2c_writeread(pca->i2c, &config, wbuffer, wbuflen, rbuffer, rbuflen);
}
/****************************************************************************
* Name: pca9555_setbit
*
* Description:
* Write a bit in a register pair
*
****************************************************************************/
static int pca9555_setbit(FAR struct ioexpander_dev_s *dev, uint8_t addr,
uint8_t pin, int bitval)
{
FAR struct pca9555_dev_s *pca = (FAR struct pca9555_dev_s *)dev;
uint8_t buf[2];
int ret;
if (pin > 15)
{
return -ENXIO;
}
else if (pin > 7)
{
addr++;
pin -= 8;
}
buf[0] = addr;
ret = pca9555_writeread(pca, &buf[0], 1, &buf[1], 1);
if (ret < 0)
{
return ret;
}
if (bitval)
{
buf[1] |= (1 << pin);
}
else
{
buf[1] &= ~(1 << pin);
}
return pca9555_write(pca, buf, 2);
}
/****************************************************************************
* Name: pca9555_getbit
*
* Description:
* Get a bit from a register pair
*
****************************************************************************/
static int pca9555_getbit(FAR struct ioexpander_dev_s *dev, uint8_t addr,
uint8_t pin, FAR bool *val)
{
FAR struct pca9555_dev_s *pca = (FAR struct pca9555_dev_s *)dev;
uint8_t buf;
int ret;
if (pin > 15)
{
return -ENXIO;
}
else if (pin > 7)
{
addr += 1;
pin -= 8;
}
ret = pca9555_writeread(pca, &addr, 1, &buf, 1);
if (ret < 0)
{
return ret;
}
*val = (buf >> pin) & 1;
return OK;
}
/****************************************************************************
* Name: pca9555_direction
*
* Description:
* See include/nuttx/ioexpander/ioexpander.h
*
****************************************************************************/
static int pca9555_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin,
int direction)
{
return pca9555_setbit(dev, PCA9555_REG_CONFIG, pin,
(direction == IOEXPANDER_DIRECTION_IN));
}
/****************************************************************************
* Name: pca9555_option
*
* Description:
* See include/nuttx/ioexpander/ioexpander.h
*
****************************************************************************/
static int pca9555_option(FAR struct ioexpander_dev_s *dev, uint8_t pin,
int opt, FAR void *val)
{
int ival = (int)val;
if (opt == IOEXPANDER_OPTION_INVERT)
{
return pca9555_setbit(dev, PCA9555_REG_POLINV, pin, ival);
}
return -EINVAL;
}
/****************************************************************************
* Name: pca9555_writepin
*
* Description:
* See include/nuttx/ioexpander/ioexpander.h
*
****************************************************************************/
static int pca9555_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin,
bool value)
{
return pca9555_setbit(dev, PCA9555_REG_OUTPUT, pin, value);
}
/****************************************************************************
* Name: pca9555_readpin
*
* Description:
* See include/nuttx/ioexpander/ioexpander.h
*
****************************************************************************/
static int pca9555_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin,
FAR bool *value)
{
return pca9555_getbit(dev, PCA9555_REG_INPUT, pin, value);
}
/****************************************************************************
* Name: pca9555_readbuf
*
* Description:
* See include/nuttx/ioexpander/ioexpander.h
*
****************************************************************************/
static int pca9555_readbuf(FAR struct ioexpander_dev_s *dev, uint8_t pin,
FAR bool *value)
{
return pca9555_getbit(dev, PCA9555_REG_OUTPUT, pin, value);
}
#ifdef CONFIG_IOEXPANDER_MULTIPIN
/****************************************************************************
* Name: pca9555_getmultibits
*
* Description:
* Read multiple bits from PCA9555 registers.
*
****************************************************************************/
static int pca9555_getmultibits(FAR struct ioexpander_dev_s *dev, uint8_t addr,
FAR uint8_t *pins, FAR bool *values,
int count)
{
FAR struct pca9555_dev_s *pca = (FAR struct pca9555_dev_s *)dev;
uint8_t buf[2];
int ret = OK;
int i;
int index;
int pin;
ret = pca9555_writeread(pca, &addr, 1, buf, 2);
if (ret < 0)
{
return ret;
}
/* Read the requested bits */
for (i = 0; i < count; i++)
{
index = 0;
pin = pins[i];
if (pin > 15)
{
return -ENXIO;
}
else if(pin > 7)
{
index = 1;
pin -= 8;
}
values[i] = (buf[index] >> pin) & 1;
}
return OK;
}
/****************************************************************************
* Name: pca9555_multiwritepin
*
* Description:
* See include/nuttx/ioexpander/ioexpander.h
*
****************************************************************************/
static int pca9555_multiwritepin(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values,
int count)
{
FAR struct pca9555_dev_s *pca = (FAR struct pca9555_dev_s *)dev;
uint8_t addr = PCA9555_REG_OUTPUT;
uint8_t buf[3];
int ret;
int i;
int index;
int pin;
/* Start by reading both registers, whatever the pins to change. We could
* attempt to read one port only if all pins were on the same port, but
* this would not save much. */
ret = pca9555_writeread(pca, &addr, 1, &buf[1], 2);
if (ret < 0)
{
return ret;
}
/* Apply the user defined changes */
for (i = 0; i < count; i++)
{
index = 1;
pin = pins[i];
if (pin > 15)
{
return -ENXIO;
}
else if(pin > 7)
{
index = 2;
pin -= 8;
}
if (values[i])
{
buf[index] |= (1 << pin);
}
else
{
buf[index] &= ~(1 << pin);
}
}
/* Now write back the new pins states */
buf[0] = addr;
return pca9555_write(pca, buf, 3);
}
/****************************************************************************
* Name: pca9555_multireadpin
*
* Description:
* See include/nuttx/ioexpander/ioexpander.h
*
****************************************************************************/
static int pca9555_multireadpin(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values,
int count)
{
return pca9555_getmultibits(dev, PCA9555_REG_INPUT,
pins, values, count);
}
/****************************************************************************
* Name: pca9555_multireadbuf
*
* Description:
* See include/nuttx/ioexpander/ioexpander.h
*
****************************************************************************/
static int pca9555_multireadbuf(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values,
int count)
{
return pca9555_getmultibits(dev, PCA9555_REG_OUTPUT,
pins, values, count);
}
#endif
#ifdef CONFIG_PCA9555_INT_ENABLE
/****************************************************************************
* Name: pca9555_irqworker
*
* Description:
* Handle GPIO interrupt events (this function actually executes in the
* context of the worker thread).
*
****************************************************************************/
static void pca9555_irqworker(void *arg)
{
uint8_t addr = PCA9555_REG_INPUT;
uint8_t buf[2];
int ret, bits;
FAR struct pca9555_dev_s *pca = (FAR struct pca9555_dev_s *)arg;
/* Read inputs */
ret = pca9555_writeread(pca, &addr, 1, buf, 2);
if (ret != OK)
{
return;
}
bits = (buf[0] << 8) | buf[1];
/* If signal PID is registered, enqueue signal. */
if (pca->dev.sigpid)
{
#ifdef CONFIG_CAN_PASS_STRUCTS
union sigval value;
value.sival_int = bits;
ret = sigqueue(pca->dev.sigpid, pca->dev.sigval, value);
#else
ret = sigqueue(pca->dev.sigpid, pca->dev.sigval, (FAR void *)bits);
#endif
dbg("pca signal %04X (sig %d to pid %d)\n",
bits, pca->dev.sigval, pca->dev.sigpid);
}
else
{
dbg("no handler registered\n");
}
/* Re-enable */
pca->config->enable(pca->config, TRUE);
}
/****************************************************************************
* Name: pca9555_interrupt
*
* Description:
* Handle GPIO interrupt events (this function executes in the
* context of the interrupt).
*
****************************************************************************/
static int pca9555_interrupt(int irq, FAR void *context)
{
#ifdef CONFIG_PCA9555_MULTIPLE
/* To support multiple devices,
* retrieve the priv structure using the irq number.
*/
# warning Missing logic
#else
register FAR struct pca9555_dev_s *pca = &g_pca9555;
#endif
/* In complex environments, we cannot do I2C transfers from the interrupt
* handler because semaphores are probably used to lock the I2C bus. In
* this case, we will defer processing to the worker thread. This is also
* much kinder in the use of system resources and is, therefore, probably
* a good thing to do in any event.
*/
DEBUGASSERT(work_available(&pca->dev.work));
/* Notice that further GPIO interrupts are disabled until the work is
* actually performed. This is to prevent overrun of the worker thread.
* Interrupts are re-enabled in pca9555_irqworker() when the work is completed.
*/
pca->config->enable(pca->config, FALSE);
return work_queue(HPWORK, &pca->dev.work, pca9555_irqworker, (FAR void *)pca, 0);
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: pca9555_initialize
*
* Description:
* Initialize a PCA9555 I2C device.
*
* TODO: Actually support more than one device.
*
****************************************************************************/
FAR struct ioexpander_dev_s *pca9555_initialize(FAR struct i2c_dev_s *i2cdev,
FAR struct pca9555_config_s *config)
{
FAR struct pca9555_dev_s *pcadev;
DEBUGASSERT(i2cdev != NULL && config != NULL);
#ifdef CONFIG_PCA9555_MULTIPLE
/* Allocate the device state structure */
pcadev = (FAR struct pca9555_dev_s *)kmm_zalloc(sizeof(struct pca9555_dev_s));
if (!pcadev)
{
return NULL;
}
/* And save the device structure in the list of PCA9555 so that we can
* find it later.
*/
pcadev->flink = g_pca9555list;
g_pca9555list = pcadev;
#else
/* Use the one-and-only PCA9555 driver instance */
pcadev = &g_pca9555;
#endif
/* Initialize the device state structure */
pcadev->i2c = i2cdev;
pcadev->dev.ops = &g_pca9555_ops;
pcadev->config = config;
/* Set the I2C address and frequency. REVISIT: This logic would be
* insufficient if we share the I2C bus with any other devices that also
* modify the address and frequency.
*/
I2C_SETADDRESS(i2cdev, config->address, 7);
I2C_SETFREQUENCY(i2cdev, config->frequency);
#ifdef CONFIG_PCA9555_INT_ENABLE
pcadev->config->attach(pcadev->config, pca9555_interrupt);
pcadev->config->enable(pcadev->config, TRUE);
#endif
return &pcadev->dev;
}
#endif /* CONFIG_IOEXPANDER_PCA9555 */
Reference in New Issue View Git Blame Copy Permalink