nuttx

a1x

Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS

2014-10-27 11:31:16 -06:00

arm

Update everything under nuttx/arch to use the corrected syslog interfaces

2014-10-08 12:48:47 -06:00

armv6-m

Update everything under nuttx/arch to use the corrected syslog interfaces

2014-10-08 12:48:47 -06:00

armv7-a

Update everything under nuttx/arch to use the corrected syslog interfaces

2014-10-08 12:48:47 -06:00

armv7-m

Fix compiler errors in up_itm_syslog.c. From Pierre-Noel Bouteville

2014-10-23 18:30:32 -06:00

c5471

There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.

2014-09-01 15:39:34 -06:00

calypso

There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.

2014-09-01 15:39:34 -06:00

common

Misc changes to get a clean build after all of the syslog changes. There are probably other things still broken

2014-10-08 16:23:48 -06:00

dm320

Update everything under nuttx/arch to use the corrected syslog interfaces

2014-10-08 12:48:47 -06:00

efm32

EFM32: Need to configure UART GPIOs as outputs

2014-10-28 14:50:15 -06:00

imx

Update everything under nuttx/arch to use the corrected syslog interfaces

2014-10-08 12:48:47 -06:00

kinetis

There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.

2014-09-01 15:39:34 -06:00

kl

Trivial, cosmetic typos in comments

2014-10-20 08:12:07 -06:00

lpc17xx

Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS

2014-10-27 11:31:16 -06:00

lpc31xx

Update everything under nuttx/arch to use the corrected syslog interfaces

2014-10-08 12:48:47 -06:00

lpc43xx

Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS

2014-10-27 11:31:16 -06:00

lpc214x

Update everything under nuttx/arch to use the corrected syslog interfaces

2014-10-08 12:48:47 -06:00

lpc2378

Update everything under nuttx/arch to use the corrected syslog interfaces

2014-10-08 12:48:47 -06:00

nuc1xx

Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS

2014-10-27 11:31:16 -06:00

sam34

SAM4E: Fix error TC header file

2014-10-28 09:22:37 -06:00

sama5

Dangle whitespace removal

2014-10-25 10:35:29 -06:00

samd

There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.

2014-09-01 15:39:34 -06:00

stm32

STM32 Serial: Don't compile up_earlyserialinit() if USE_EARLYSERIALINIT is not define. Otherwise, a macro definition clobbers the function definition

2014-10-28 06:58:37 -06:00

str71x

Update everything under nuttx/arch to use the corrected syslog interfaces

2014-10-08 12:48:47 -06:00

tiva

There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.

2014-09-01 15:39:34 -06:00

.gitignore

.dSYM only needs to be in the same .gitignore files as .exe

2013-05-30 15:02:04 -06:00

Makefile

The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object

2014-09-04 13:31:34 -06:00