sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
cf884b7460
nuttx/boards/arm/stm32/emw3162/include/board.h
Alexander Lunev fd46d7a74f boards: added support for EMW3162 Wi-Fi board
2021-06-11 21:05:24 -05:00

207 lines
7.4 KiB
C
Raw Blame History

/****************************************************************************
* boards/arm/stm32/emw3162/include/board.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_STM32_EMW3162_INCLUDE_BOARD_H
#define __BOARDS_ARM_STM32_EMW3162_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdbool.h>
#endif
#include "stm32_rcc.h"
#include "stm32.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* The EMW3162 board features a single 26MHz crystal.
*
* This is the canonical configuration:
* System Clock source : PLL (HSE)
* SYSCLK(Hz) : 120000000 Determined by PLL
* configuration
* HCLK(Hz) : 120000000 (STM32_RCC_CFGR_HPRE)
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
* HSE Frequency(Hz) : 26000000 (STM32_BOARD_XTAL)
* PLLM : 26 (STM32_PLLCFG_PLLM)
* PLLN : 240 (STM32_PLLCFG_PLLN)
* PLLP : 2 (STM32_PLLCFG_PLLP)
* PLLQ : 5 (STM32_PLLCFG_PLLQ)
* Main regulator output voltage : Scale1 mode Needed for high speed
* SYSCLK
* Flash Latency(WS) : 3
* Prefetch Buffer : OFF
* Instruction cache : ON
* Data cache : ON
* Require 48MHz for USB OTG HS : Enabled
* SDIO and RNG clock
*/
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC
* HSE - On-board crystal frequency is 26MHz
* LSE - 32.768 kHz
*/
#define STM32_BOARD_XTAL 26000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* = (26,000,000 / 26) * 240
* = 240,000,000
* SYSCLK = PLL_VCO / PLLP
* = 240,000,000 / 2 = 120,000,000
* USB OTG FS, SDIO and RNG Clock
* = PLL_VCO / PLLQ
* = 48,000,000
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(26)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(240)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5)
#define STM32_SYSCLK_FREQUENCY 120000000ul
/* AHB clock (HCLK) is SYSCLK (120MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
/* APB1 clock (PCLK1) is HCLK/4 (30MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
/* APB2 clock (PCLK2) is HCLK/2 (60MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* LED definitions **********************************************************/
/* LED index values for use with board_userled() */
#define BOARD_LED1 0
#define BOARD_NLEDS 1
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
* defined. In that case, the usage by the board port is defined in
* include/board.h and src/sam_autoleds.c. The LEDs are used to encode
* OS-related events as follows:
*
* ------------------- ---------------------------- ------
* SYMBOL Meaning LED
* ------------------- ---------------------------- ------
*/
#define LED_STARTED 0 /* NuttX has been started OFF */
#define LED_HEAPALLOCATE 0 /* Heap has been allocated OFF */
#define LED_IRQSENABLED 0 /* Interrupts enabled OFF */
#define LED_STACKCREATED 1 /* Idle stack created ON */
#define LED_INIRQ 2 /* In an interrupt N/C */
#define LED_SIGNAL 2 /* In a signal handler N/C */
#define LED_ASSERTION 2 /* An assertion failed N/C */
#define LED_PANIC 3 /* The system has crashed FLASH */
#undef LED_IDLE /* MCU is is sleep mode Not used */
/* Thus if LED is statically on, NuttX has successfully booted and is,
* apparently, running normally. If LED is flashing at approximately
* 2Hz, then a fatal error has been detected and the system has halted.
*/
/* Alternate function pin selections ****************************************/
/* UART1 */
#ifdef CONFIG_STM32_USART1
# define GPIO_USART1_RX GPIO_USART1_RX_1
# define GPIO_USART1_TX GPIO_USART1_TX_1
#endif
/* SDIO definitions *********************************************************/
/* Note that slower clocking is required when DMA is disabled in order
* to avoid RX overrun/TX underrun errors due to delayed responses
* to service FIFOs in interrupt driven mode.
*
* These values have not been tuned!!!
*
* SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
*/
#define SDIO_INIT_CLKDIV (118 << SDIO_CLKCR_CLKDIV_SHIFT)
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_SDXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* DMA Channel/Stream Selections ********************************************/
/* Stream selections are arbitrary for now but might become important in the
* future if we set aside more DMA channels/streams.
*
* SDIO DMA
* DMAMAP_SDIO_1 = Channel 4, Stream 3
* DMAMAP_SDIO_2 = Channel 4, Stream 6
*/
#define DMAMAP_SDIO DMAMAP_SDIO_1
#endif /* __BOARDS_ARM_STM32_EMW3162_INCLUDE_BOARD_H */
Reference in New Issue View Git Blame Copy Permalink