224 lines
8.6 KiB
C
224 lines
8.6 KiB
C
/************************************************************************************
|
||
* configs/sama5d4-ek/include/board_384mhz.h
|
||
*
|
||
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
*
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in
|
||
* the documentation and/or other materials provided with the
|
||
* distribution.
|
||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
* used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
* POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
************************************************************************************/
|
||
|
||
#ifndef __CONFIGS_SAMA5D4_EK_INCLUDE_BOARD_384MHZ_H
|
||
#define __CONFIGS_SAMA5D4_EK_INCLUDE_BOARD_384MHZ_H
|
||
|
||
/************************************************************************************
|
||
* Included Files
|
||
************************************************************************************/
|
||
|
||
#include <nuttx/config.h>
|
||
|
||
/************************************************************************************
|
||
* Pre-processor Definitions
|
||
************************************************************************************/
|
||
|
||
/* Clocking *************************************************************************/
|
||
/* After power-on reset, the SAMA5 device is running on a 12MHz internal RC. These
|
||
* definitions will configure operational clocking.
|
||
*
|
||
* This is an alternative slower configuration that will produce a 48MHz USB clock
|
||
* with the required accuracy. When used with OHCI, an additional requirement is
|
||
* the PLLACK be a multiple of 48MHz. This setup results in a CPU clock of 384MHz.
|
||
*
|
||
* MAINOSC: Frequency = 12MHz (crystal)
|
||
* PLLA: PLL Multiplier = 64 to generate PLLACK = 768MHz
|
||
* Master Clock (MCK): Source = PLLACK/2, Prescalar = 1, MDIV = 3 to generate
|
||
* MCK = 128MHz
|
||
* CPU clock = 384MHz
|
||
*/
|
||
|
||
/* Main oscillator register settings.
|
||
*
|
||
* The start up time should be should be:
|
||
* Start Up Time = 8 * MOSCXTST / SLCK = 56 Slow Clock Cycles.
|
||
*/
|
||
|
||
#define BOARD_CKGR_MOR_MOSCXTST (62 << PMC_CKGR_MOR_MOSCXTST_SHIFT) /* Start-up Time */
|
||
|
||
/* PLLA configuration.
|
||
*
|
||
* Multipler = 64: PLLACK = 64 * 12MHz = 768MHz
|
||
*/
|
||
|
||
#define BOARD_CKGR_PLLAR_COUNT (63 << PMC_CKGR_PLLAR_COUNT_SHIFT)
|
||
#define BOARD_CKGR_PLLAR_OUT (0)
|
||
#define BOARD_CKGR_PLLAR_MUL (63 << PMC_CKGR_PLLAR_MUL_SHIFT)
|
||
|
||
/* PMC master clock register settings.
|
||
*
|
||
* Master/Processor Clock Source Selection = PLLA
|
||
* Master/Processor Clock Prescaler = 1
|
||
* PLLA Divider = 2
|
||
* Master Clock Division (MDIV) = 3
|
||
*
|
||
* NOTE: Bit PLLADIV2 must always be set to 1 when MDIV is set to 3.
|
||
*
|
||
* Prescaler input = 768MHz / 2 = 384MHz
|
||
* Prescaler output = 384MHz / 1 = 384MHz
|
||
* Processor Clock (PCK) = 384MHz
|
||
* Master clock (MCK) = 396MHz / 3 = 128MHz
|
||
*/
|
||
|
||
#define BOARD_PMC_MCKR_CSS PMC_MCKR_CSS_PLLA
|
||
#define BOARD_PMC_MCKR_PRES PMC_MCKR_PRES_DIV1
|
||
#define BOARD_PMC_MCKR_PLLADIV PMC_MCKR_PLLADIV2
|
||
#define BOARD_PMC_MCKR_MDIV PMC_MCKR_MDIV_PCKDIV3
|
||
|
||
#if defined(CONFIG_SAMA5_EHCI) || defined(CONFIG_SAMA5_OHCI) || \
|
||
defined(CONFIG_SAMA5_UDPHS)
|
||
|
||
/* For OHCI Full-speed operations, the user has to perform the following:
|
||
*
|
||
* 1) Enable UHP peripheral clock, bit (1 << AT91C_ID_UHPHS) in PMC_PCER
|
||
* register.
|
||
* 2) Select PLLACK as Input clock of OHCI part, USBS bit in PMC_USB
|
||
* register.
|
||
* 3) Program the OHCI clocks (UHP48M and UHP12M) with USBDIV field in
|
||
* PMC_USB register. USBDIV value is calculated regarding the PLLACK
|
||
* value and USB Full-speed accuracy.
|
||
* 4) Enable the OHCI clocks, UHP bit in PMC_SCER register.
|
||
*
|
||
* "The USB Host controller requires 48 MHz and 12 MHz clocks for OHCI
|
||
* full-speed operations. These clocks must be generated by a PLL with a
|
||
* correct accuracy of <20> 0.25% thanks to USBDIV field.
|
||
*
|
||
* "Thus the USB Host peripheral receives three clocks from the Power
|
||
* Management Controller (PMC): the Peripheral Clock (MCK domain), the
|
||
* UHP48M and the UHP12M (built-in UHP48M divided by four) used by the
|
||
* OHCI to interface with the bus USB signals (Recovered 12 MHz domain)
|
||
* in Full-speed operations"
|
||
*
|
||
* USB Clock = PLLACK / (USBDIV + 1) = 48MHz
|
||
* USBDIV = PLLACK / 48MHz - 1
|
||
* = 15
|
||
*
|
||
* The maximum value of USBDIV is 15 corresponding to a divisor of 16.
|
||
* REVISIT: However, using the divisor of (15+1) yields a frame rate
|
||
* of 500 frames per second. A divisor of (7+1) gives the correct 1MS
|
||
* frame rate. I cannot explain the factor of 2 difference.
|
||
*/
|
||
|
||
# undef BOARD_USE_UPLL /* Use PLLA as source clock */
|
||
# define BOARD_OHCI_INPUT PMC_USB_USBS_PLLA /* Input is PLLACK */
|
||
# if 1 /* REVISIT */
|
||
# define BOARD_OHCI_DIVIDER (7) /* Divided by 8 */
|
||
# else
|
||
# define BOARD_OHCI_DIVIDER (15) /* Divided by 16 */
|
||
# endif
|
||
#endif
|
||
|
||
/* ADC Configuration
|
||
*
|
||
* ADCClock = MCK / ((PRESCAL+1) * 2)
|
||
*
|
||
* Given:
|
||
* MCK = 128MHz
|
||
* ADCClock = 8MHz
|
||
* Then:
|
||
* PRESCAL = 7
|
||
*/
|
||
|
||
#define BOARD_ADC_PRESCAL (7)
|
||
#define BOARD_TSD_STARTUP (40) /* 40 nanoseconds */
|
||
#define BOARD_TSD_TRACKTIM (2000) /* Min 1<>s at 8MHz */
|
||
#define BOARD_TSD_DEBOUNCE (10000000) /* 10 milliseconds (units nanoseconds) */
|
||
|
||
/* Resulting frequencies */
|
||
|
||
#define BOARD_MAINCK_FREQUENCY BOARD_MAINOSC_FREQUENCY
|
||
#define BOARD_PLLA_FREQUENCY (768000000) /* PLLACK: 64 * 12Mhz / 1 */
|
||
#define BOARD_PCK_FREQUENCY (384000000) /* CPU: PLLACK / 2 / 1 */
|
||
#define BOARD_MCK_FREQUENCY (128000000) /* MCK: PLLACK / 2 / 1 / 3 */
|
||
#define BOARD_ADCCLK_FREQUENCY (8000000) /* ADCCLK: MCK / ((7+1)*2) */
|
||
|
||
/* Clocking to certain peripherals may be MCK/2.
|
||
*
|
||
* REVISIT: I am not sure why this is. Perhaps because of H32MXDIV?
|
||
*/
|
||
|
||
#define BOARD_PIT_FREQUENCY (BOARD_MCK_FREQUENCY >> 1)
|
||
#define BOARD_USART_FREQUENCY (BOARD_MCK_FREQUENCY >> 1)
|
||
|
||
/* HSMCI clocking
|
||
*
|
||
* Multimedia Card Interface clock (MCCK or MCI_CK) is Master Clock (MCK)
|
||
* divided by (2*(CLKDIV) + CLOCKODD + 2).
|
||
*
|
||
* MCI_SPEED = MCK / (2*CLKDIV + CLOCKODD + 2)
|
||
*
|
||
* Where CLKDIV has a range of 0-255.
|
||
*/
|
||
|
||
/* MCK = 128MHz, CLKDIV = 159, MCI_SPEED = 128MHz / (2*159 + 0 + 2) = 400 KHz */
|
||
|
||
#define HSMCI_INIT_CLKDIV (159 << HSMCI_MR_CLKDIV_SHIFT)
|
||
|
||
/* MCK = 128MHz, CLKDIV = 2 w/CLOCKODD, MCI_SPEED = 128MHz /(2*2 + 1 + 2) = 18.3 MHz */
|
||
|
||
#define HSMCI_MMCXFR_CLKDIV ((2 << HSMCI_MR_CLKDIV_SHIFT) | HSMCI_MR_CLKODD)
|
||
|
||
/* MCK = 128MHz, CLKDIV = 2, MCI_SPEED = 128MHz /(2*2 + 0 + 2) = 21.3 MHz */
|
||
|
||
#define HSMCI_SDXFR_CLKDIV (2 << HSMCI_MR_CLKDIV_SHIFT)
|
||
#define HSMCI_SDWIDEXFR_CLKDIV HSMCI_SDXFR_CLKDIV
|
||
|
||
/************************************************************************************
|
||
* Public Data
|
||
************************************************************************************/
|
||
|
||
#ifndef __ASSEMBLY__
|
||
|
||
#undef EXTERN
|
||
#if defined(__cplusplus)
|
||
#define EXTERN extern "C"
|
||
extern "C" {
|
||
#else
|
||
#define EXTERN extern
|
||
#endif
|
||
|
||
/************************************************************************************
|
||
* Public Function Prototypes
|
||
************************************************************************************/
|
||
|
||
#undef EXTERN
|
||
#if defined(__cplusplus)
|
||
}
|
||
#endif
|
||
|
||
#endif /* !__ASSEMBLY__ */
|
||
#endif /* __CONFIGS_SAMA5D4_EK_INCLUDE_BOARD_384MHZ_H */
|