nuttx/net/tcp/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

menu "TCP/IP Networking"

config NET_TCP
	bool "TCP/IP Networking"
	default n
	select NET_READAHEAD if !NET_TCP_NO_STACK
	---help---
		Enable or disable TCP networking support.

config NET_TCP_NO_STACK
	bool "Disable TCP/IP Stack"
	default n
	select NET_TCP
	---help---
		Build without TCP/IP stack even if TCP networking support enabled.

if NET_TCP && !NET_TCP_NO_STACK

config NET_TCP_DELAYED_ACK
	bool "TCP/IP Delayed ACK"
	default n
	---help---
		RFC 1122:  A host that is receiving a stream of TCP data segments
		can increase efficiency in both the Internet and the hosts
		by sending fewer than one ACK (acknowledgment) segment per data
		segment received; this is known as a "delayed ACK".

		TCP should implement a delayed ACK, but an ACK should not be
		excessively delayed; in particular, the delay MUST be less than
		0.5 seconds, and in a stream of full-sized segments there should
		be an ACK for at least every second segments.

config NET_TCP_KEEPALIVE
	bool "TCP/IP Keep-alive support"
	default n
	select NET_TCPPROTO_OPTIONS
	---help---
		Enable support for the SO_KEEPALIVE socket option

config NET_TCPURGDATA
	bool "Urgent data"
	default n
	---help---
		Determines if support for TCP urgent data notification should be
		compiled in. Urgent data (out-of-band data) is a rarely used TCP feature
		that is very seldom would be required.

config NET_TCP_PREALLOC_CONNS
	int "Preallocated TCP/IP connections"
	default 8
	---help---
		Number of TCP/IP connections (all tasks).

		This number of connections will be pre-allocated during system boot.
		If dynamic connections allocation is enabled, more connections may
		be allocated at a later time, as the system needs them. Else this
		will be the maximum number of connections available to the system
		at all times.

		Set to 0 to disable (and rely only on dynamic allocations).

config NET_TCP_ALLOC_CONNS
	int "Dynamic TCP/IP connections allocation"
	default 0
	---help---
		Dynamic memory allocations for TCP/IP.

		When set to 0 all dynamic allocations are disabled.

		When set to 1 a new connection will be allocated every time,
		and it will be free'd when no longer needed.

		Setting this to 2 or more will allocate the connections in
		batches (with batch size equal to this config). When a
		connection is no longer needed, it will be returned to the
		free connections pool, and it will never be deallocated!

config NET_TCP_MAX_CONNS
	int "Maximum number of TCP/IP connections"
	default 0
	depends on NET_TCP_ALLOC_CONNS > 0
	---help---
		If dynamic connections allocation is selected (NET_TCP_ALLOC_CONNS > 0)
		this will limit the number of connections that can be allocated.

		This is useful in case the system is under very heavy load (or
		under attack), ensuring that the heap will not be exhausted.

config NET_TCP_NPOLLWAITERS
	int "Number of TCP poll waiters"
	default 1

config NET_TCP_RTO
	int "RTO of TCP/IP connections"
	default 3
	---help---
		RTO of TCP/IP connections (all tasks)

config NET_TCP_MAXRTX
	int "Maximum retransmitted number of TCP/IP data packet"
	default 8

config NET_TCP_MAXSYNRTX
	int "Maximum retransmitted number of TCP/IP SYN packet"
	default 5

config NET_TCP_WAIT_TIMEOUT
	int "TIME_WAIT Length of TCP/IP connections"
	default 120
	---help---
		TIME_WAIT Length of TCP/IP connections (all tasks).  In units
		of seconds.

config NET_MAX_LISTENPORTS
	int "Number of listening ports"
	default 20
	---help---
		Maximum number of listening TCP/IP ports (all tasks).  Default: 20

config NET_TCP_FAST_RETRANSMIT
	bool "Enable the Fast Retransmit algorithm"
	default y
	---help---
		RFC2001:
		3.  Fast Retransmit
			Modifications to the congestion avoidance algorithm were proposed in
			1990 [3].  Before describing the change, realize that TCP may
			generate an immediate acknowledgment (a duplicate ACK) when an out-
			of-order segment is received (Section 4.2.2.21 of [1], with a note
			that one reason for doing so was for the experimental fast-
			retransmit algorithm).  This duplicate ACK should not be delayed.
			The purpose of this duplicate ACK is to let the other end know that a
			segment was received out of order, and to tell it what sequence
			number is expected.

			Since TCP does not know whether a duplicate ACK is caused by a lost
			segment or just a reordering of segments, it waits for a small number
			of duplicate ACKs to be received.  It is assumed that if there is
			just a reordering of the segments, there will be only one or two
			duplicate ACKs before the reordered segment is processed, which will
			then generate a new ACK.  If three or more duplicate ACKs are
			received in a row, it is a strong indication that a segment has been
			lost.  TCP then performs a retransmission of what appears to be the
			missing segment, without waiting for a retransmission timer to
			expire.

config NET_TCP_CC_NEWRENO
	bool "Enable the NewReno Congestion Control algorithm"
	default n
	select NET_TCP_FAST_RETRANSMIT
	---help---
		RFC5681:
			The TCP Congestion Control defines four congestion control algorithms,
			slow start, congestion avoidance, fast retransmit, and fast recovery.

config NET_TCP_WINDOW_SCALE
	bool "Enable TCP/IP Window Scale Option"
	default n
	---help---
		RFC1323:
		2. TCP WINDOW SCALE OPTION
			The window scale extension expands the definition of the TCP
			window to 32 bits and then uses a scale factor to carry this 32-
			bit value in the 16-bit Window field of the TCP header (SEG.WND in
			RFC-793).

if NET_TCP_WINDOW_SCALE

config NET_TCP_WINDOW_SCALE_FACTOR
	int "TCP/IP Window Scale Factor"
	default 0
	---help---
		This is the default value for window scale factor.

endif # NET_TCP_WINDOW_SCALE

config NET_TCP_OUT_OF_ORDER
	bool "Enable TCP/IP Out Of Order segments"
	default n
	---help---
		TCP will queue segments that arrive out of order.

if NET_TCP_OUT_OF_ORDER

config NET_TCP_OUT_OF_ORDER_BUFSIZE
	int "TCP/IP Out Of Order buffer size"
	default 16384
	---help---
		This is the default value for out-of-order buffer size.

endif # NET_TCP_OUT_OF_ORDER

config NET_TCP_SELECTIVE_ACK
	bool "Enable TCP/IP Selective Acknowledgment Options"
	default n
	select NET_TCP_OUT_OF_ORDER
	---help---
		Enable RFC2018(TCP Selective Acknowledgment Options):
			Selective Acknowledgment (SACK) is a strategy which corrects this
			behavior in the face of multiple dropped segments.  With selective
			acknowledgments, the data receiver can inform the sender about all
			segments that have arrived successfully, so the sender need
			retransmit only the segments that have actually been lost.

config NET_TCP_NOTIFIER
	bool "Support TCP notifications"
	default n
	depends on SCHED_WORKQUEUE
	select WQUEUE_NOTIFIER
	---help---
		Enable building of TCP notifier logic that will execute a worker
		function on the low priority work queue when read-ahead data
		is available or when a TCP connection is lost.  This is is a general
		purpose notifier, but was developed specifically to support poll()
		logic where the poll must wait for these events.

config NET_TCP_WRITE_BUFFERS
	bool "Enable TCP/IP write buffering"
	default n
	select NET_WRITE_BUFFERS
	---help---
		Write buffers allows buffering of ongoing TCP/IP packets, providing
		for higher performance, streamed output.

		You might want to disable TCP/IP write buffering on a highly memory
		memory constrained system where there are no performance issues.

if NET_TCP_WRITE_BUFFERS

config NET_TCP_NWRBCHAINS
	int "Number of pre-allocated I/O buffer chain heads"
	default 8
	---help---
		These tiny nodes are used as "containers" to support queuing of
		TCP write buffers.  This setting will limit the number of TCP write
		operations that can be "in-flight" at any give time.  So a good
		choice for this value would be the same as the maximum number of
		TCP connections.

config NET_TCP_WRBUFFER_DEBUG
	bool "Force write buffer debug"
	default n
	depends on DEBUG_FEATURES
	select IOB_DEBUG
	---help---
		This option will force debug output from TCP write buffer logic,
		even without network debug output.  This is not normally something
		that would want to do but is convenient if you are debugging the
		write buffer logic and do not want to get overloaded with other
		network-related debug output.

config NET_TCP_WRBUFFER_DUMP
	bool "Force write buffer dump"
	default n
	depends on DEBUG_NET || NET_TCP_WRBUFFER_DEBUG
	select IOB_DEBUG
	---help---
		Dump the contents of the write buffers.  You do not want to do this
		unless you really want to analyze the write buffer transfers in
		detail.

endif # NET_TCP_WRITE_BUFFERS

config NET_TCP_RECV_PACK
	bool "Enable TCP/IP receive data in a continuous poll"
	default y
	---help---
		This option will enable TCP/IP receive data into a continuous iob chain.
		Fragmentation of network data will intensify iob consumption, if
		the device receives a message storm of fragmented packets, the iob
		cache will not be effectively used, this is not allowed on iot devices
		since the resources of such devices are limited. Of course, this
		also takes some disadvantages: data needs to be copied.
		This option will brings some balance on resource-constrained devices,
		enable this config to reduce the consumption of iob, the received iob
		buffers will be merged into the contiguous iob chain.

config NET_TCPBACKLOG
	bool "TCP/IP backlog support"
	default n
	---help---
		Incoming connections pend in a backlog until accept() is called.
		The size of the backlog is selected when listen() is called.

if NET_TCPBACKLOG

config NET_TCPBACKLOG_CONNS
	int "TCP backlog conns threshold"
	default 8
	---help---
		Maximum number of TCP backlog connections (all tasks).

endif # NET_TCPBACKLOG

config NET_SENDFILE
	bool "Optimized network sendfile()"
	default n
	---help---
		Support larger, higher performance sendfile() for transferring
		files out a TCP connection.

endif # NET_TCP && !NET_TCP_NO_STACK

if NET_STATISTICS

config NET_TCP_DEBUG_DROP_RECV
	bool "TCP/IP debug feature to drop receive packet"
	default n
	---help---
		This is the debug feature to drop TCP/IP received packet

if NET_TCP_DEBUG_DROP_RECV

config NET_TCP_DEBUG_DROP_RECV_PROBABILITY
	int "TCP/IP drop probability of received packet"
	range 50 10000
	default 50
	---help---
		This is the drop probability of received packet, Default: 1/50

endif # NET_TCP_DEBUG_DROP_RECV

config NET_TCP_DEBUG_DROP_SEND
	bool "TCP/IP debug feature to drop send packet"
	default n
	---help---
		This is the debug feature to drop TCP/IP send packet

if NET_TCP_DEBUG_DROP_SEND

config NET_TCP_DEBUG_DROP_SEND_PROBABILITY
	int "TCP/IP drop probability of send packet"
	range 50 10000
	default 50
	---help---
		This is the drop probability of send packet, Default: 1/50

endif # NET_TCP_DEBUG_DROP_SEND

endif # NET_STATISTICS

endmenu # TCP/IP Networking