4ed48c33e9
Currently only Port UART0 is supported for Allwinner A64. This PR adds support for all UART Ports: UART1 to UART4. (Except R-UART, which is a special low-power UART) This is required for the upcoming LTE Modem Driver (Quectel EG25-G) for PINE64 PinePhone, which uses UART3. [(Details here)](https://lupyuen.github.io/articles/lte2) The code was adapted from the NuttX UART Driver for Allwinner A1X: [`a1x_serial.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_serial.c) `arch/arm64/src/a64/a64_serial.c`: Added ports UART1 to UART4, based on [`a1x_serial.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_serial.c) `arch/arm64/src/a64/a64_serial.h`: Added IRQs for UART1 to UART4. Moved UART Base Addresses to `a64_memorymap.h` `arch/arm64/src/a64/hardware/a64_memorymap.h`: Added UART Base Addresses for UART0 to UART4 `arch/arm64/src/a64/Kconfig`: Added UART1 to UART4 to Allwinner A64 Peripheral Selection menu `boards/arm64/a64/pinephone/configs/lcd/defconfig`, `lvgl/defconfig`, `nsh/defconfig`, `sensor/defconfig`: Fixed `UART1_SERIAL_CONSOLE` to `UART0_SERIAL_CONSOLE`
75 lines
1.8 KiB
Plaintext
75 lines
1.8 KiB
Plaintext
#
|
|
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
|
#
|
|
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
|
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
|
# modifications.
|
|
#
|
|
CONFIG_A64_RSB=y
|
|
CONFIG_A64_TWI1=y
|
|
CONFIG_A64_UART=y
|
|
CONFIG_ARCH="arm64"
|
|
CONFIG_ARCH_ARM64=y
|
|
CONFIG_ARCH_BOARD="pinephone"
|
|
CONFIG_ARCH_BOARD_PINEPHONE=y
|
|
CONFIG_ARCH_CHIP="a64"
|
|
CONFIG_ARCH_CHIP_A64=y
|
|
CONFIG_ARCH_INTERRUPTSTACK=4096
|
|
CONFIG_BOARDCTL_RESET=y
|
|
CONFIG_BOARD_LOOPSPERMSEC=116524
|
|
CONFIG_BUILTIN=y
|
|
CONFIG_DEBUG_ASSERTIONS=y
|
|
CONFIG_DEBUG_ERROR=y
|
|
CONFIG_DEBUG_FEATURES=y
|
|
CONFIG_DEBUG_FULLOPT=y
|
|
CONFIG_DEBUG_INFO=y
|
|
CONFIG_DEBUG_SCHED=y
|
|
CONFIG_DEBUG_SCHED_ERROR=y
|
|
CONFIG_DEBUG_SCHED_WARN=y
|
|
CONFIG_DEBUG_SYMBOLS=y
|
|
CONFIG_DEBUG_WARN=y
|
|
CONFIG_DEFAULT_TASK_STACKSIZE=8192
|
|
CONFIG_DEV_ZERO=y
|
|
CONFIG_EXAMPLES_HELLO=y
|
|
CONFIG_EXAMPLES_LEDS=y
|
|
CONFIG_EXPERIMENTAL=y
|
|
CONFIG_FS_PROCFS=y
|
|
CONFIG_FS_ROMFS=y
|
|
CONFIG_HAVE_CXX=y
|
|
CONFIG_HAVE_CXXINITIALIZE=y
|
|
CONFIG_IDLETHREAD_STACKSIZE=8192
|
|
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
|
CONFIG_INTELHEX_BINARY=y
|
|
CONFIG_MPU60X0_I2C=y
|
|
CONFIG_NSH_ARCHINIT=y
|
|
CONFIG_NSH_BUILTIN_APPS=y
|
|
CONFIG_NSH_FILEIOSIZE=512
|
|
CONFIG_NSH_READLINE=y
|
|
CONFIG_NSH_ROMFSETC=y
|
|
CONFIG_PREALLOC_TIMERS=4
|
|
CONFIG_PTHREAD_STACK_MIN=8192
|
|
CONFIG_RAMLOG=y
|
|
CONFIG_RAM_SIZE=134217728
|
|
CONFIG_RAM_START=0x40000000
|
|
CONFIG_RAW_BINARY=y
|
|
CONFIG_READLINE_CMD_HISTORY=y
|
|
CONFIG_RR_INTERVAL=200
|
|
CONFIG_SCHED_HPWORK=y
|
|
CONFIG_SCHED_HPWORKPRIORITY=192
|
|
CONFIG_SENSORS=y
|
|
CONFIG_SENSORS_MPU60X0=y
|
|
CONFIG_SPINLOCK=y
|
|
CONFIG_STACK_COLORATION=y
|
|
CONFIG_START_MONTH=11
|
|
CONFIG_START_YEAR=2022
|
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
|
CONFIG_SYSTEM_NSH=y
|
|
CONFIG_SYSTEM_SYSTEM=y
|
|
CONFIG_SYSTEM_TIME64=y
|
|
CONFIG_TESTING_GETPRIME=y
|
|
CONFIG_TESTING_OSTEST=y
|
|
CONFIG_UART0_SERIAL_CONSOLE=y
|
|
CONFIG_USEC_PER_TICK=1000
|
|
CONFIG_USERLED=y
|
|
CONFIG_USERLED_LOWER=y
|