nuttx/configs/Kconfig
Gregory Nutt 61fd244fd3 Add support for the Maxim Integrated MAX32660-EVSYS board.
Squashed commit of the following:

    arch/arm/src/max326xx and configs/max32660-evsys/nsh/defconfig:  Work out some issues related to MAX326xx configuration.

    configs/max32660-evsys:  Add unverified board support framework.
2018-11-17 13:24:09 -06:00

2501 lines
81 KiB
Plaintext

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
choice
prompt "Select target board"
default ARCH_BOARD_CUSTOM
---help---
Select the board hosting the architecture. You must first select the
exact MCU part number, then the boards supporting that part will
be available for selection. Use ARCH_BOARD_CUSTOM to create a new
board configuration.
config ARCH_BOARD_AMBER
bool "Amber Web Server"
depends on ARCH_CHIP_ATMEGA128
---help---
This is placeholder for the SoC Robotics Amber Web Server that is based
on the Atmel AVR ATMega128 MCU. There is not much there yet and what is
there is untested due to tool-related issues.
config ARCH_BOARD_ARDUINO_MEGA2560
bool "Arduino Mega 2560"
depends on ARCH_CHIP_ATMEGA2560
---help---
This option selects the Arduino Mega 2560 board featuring the Atmel
Atmega2560 MCU running at 16 MHz.
config ARCH_BOARD_ARDUINO_DUE
bool "Arduino Due"
depends on ARCH_CHIP_ATSAM3X8E
select ARCH_HAVE_LEDS
---help---
This options selects the Arduino DUE board featuring the Atmel
ATSAM3X8E MCU running at 84 MHz.
config ARCH_BOARD_AVR32DEV1
bool "Atmel AVR32DEV1 board"
depends on ARCH_CHIP_AT32UC3B0256
select ARCH_HAVE_LEDS
# select ARCH_HAVE_BUTTONS
# select ARCH_HAVE_IRQBUTTONS
---help---
This is a port of NuttX to the Atmel AVR32DEV1 board. That board is
based on the Atmel AT32UC3B0256 MCU and uses a specially patched
version of the GNU toolchain: The patches provide support for the
AVR32 family. That patched GNU toolchain is available only from the
Atmel website. STATUS: This port is functional but very basic. There
are configurations for NSH and the OS test.
config ARCH_BOARD_C5471EVM
bool "Spectrum Digital C5471 evaluation board"
depends on ARCH_CHIP_C5471
select ARCH_HAVE_LEDS
---help---
This is a port to the Spectrum Digital C5471 evaluation board. The
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*.
This port is complete and verified.
config ARCH_BOARD_CLICKER2_STM32
bool "Mikroe Clicker2 STM32"
depends on ARCH_CHIP_STM32F407VG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Mikroe Clicker2 STM32 board based on the STMicro STM32F407VGT6 MCU.
config ARCH_BOARD_CLOUDCTRL
bool "Darcy's CloudController stm32f10x board"
depends on ARCH_CHIP_STM32F107VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Small network relay development board. Based on the Shenzhou IV development
board design.
config ARCH_BOARD_DEMOS92S12NEC64
bool "NXP/FreeScale DMO9S12NE64 board"
depends on ARCH_CHIP_MCS92S12NEC64
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
NXP/FreeScale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This
port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it
is code complete but has not yet been verified.
config ARCH_BOARD_DK_TM4C129X
bool "Tiva DK-TM4C129x Connected Development Kit"
depends on ARCH_CHIP_TM4C129XNC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Tiva DK-TM4C129x Connected Development Kit featuring the
TM4C129XNCZAD MCU.
config ARCH_BOARD_EA3131
bool "Embedded Artists EA3131 Development board"
depends on ARCH_CHIP_LPC3131
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Embedded Artists EA3131 Development board. This board is based on the
an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is complete and mature.
config ARCH_BOARD_EA3152
bool "Embedded Artists EA3152 Development board"
depends on ARCH_CHIP_LPC3152
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Embedded Artists EA3152 Development board. This board is based on the
an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*.
STATUS: This port is has not be exercised well, but since it is
a simple derivative of the ea3131, it should be fully functional.
config ARCH_BOARD_EAGLE100
bool "Micromint Eagle-100 Development board"
depends on ARCH_CHIP_LM3S6918
select ARCH_HAVE_LEDS
---help---
Micromint Eagle-100 Development board. This board is based on the
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
config ARCH_BOARD_EFM32G8XXSTK
bool "EFM32 Gecko Starter Kit"
depends on ARCH_CHIP_EFM32G890F128
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the EFM32 Gecko Starter Kit (EFM32-G8XX-STK).
config ARCH_BOARD_EFM32GG_STK3700
bool "EFM32 Giant Gecko Starter Kit"
depends on ARCH_CHIP_EFM32GG990F1024
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This option selects the EFM32 Giant Gecko Starter Kit (EFM32GG-STK3700).
config ARCH_BOARD_EKKLM3S9B96
bool "TI/Stellaris EKK-LM3S9B96"
depends on ARCH_CHIP_LM3S9B96
select ARCH_HAVE_LEDS
---help---
TI/Stellaris EKK-LM3S9B96 board. This board is based on the
an EKK-LM3S9B96 which is a Cortex-M3.
config ARCH_BOARD_ESP32CORE
bool "Expressif ESP32 Core board V2"
depends on ARCH_CHIP_ESP32
---help---
The ESP32 is a dual-core system from Expressif with two Harvard
architecture Xtensa LX6 CPUs. All embedded memory, external memory
and peripherals are located on the data bus and/or the instruction
bus of these CPUs. With some minor exceptions, the address mapping
of two CPUs is symmetric, meaning they use the same addresses to
access the same memory.
config ARCH_BOARD_EZ80F910200KITG
bool "ZiLOG ez80f910200kitg development kit"
depends on ARCH_CHIP_EZ80F91
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
ez80Acclaim! Microcontroller. This port use the Zilog ez80f910200kitg
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_EZ80F910200ZCO
bool "ZiLOG ez80f910200zco development kit"
depends on ARCH_CHIP_EZ80F91
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
ez80Acclaim! Microcontroller. This port use the Zilog ez80f910200zco
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_FIRE_STM32
bool "M3 Wildfire STM32 board"
depends on ARCH_CHIP_STM32F103VE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Support for the M3 Wildfire STM32 board. This board is based on the
STM32F103VET6 chip. See http://firestm32.taobao.com . Version 2
and 3 of the boards are supported but only version 2 has been
tested.
config ARCH_BOARD_FLIPNCLICK_PIC32MZ
bool "Mikroe Flip&Click PIC32MZ"
depends on ARCH_CHIP_PIC32MZ2048EFH
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects the Mikroe Flip&Click PIC32MZ board. This
board is an chipKit Arduino-compatible board (but can also be used
with the Mikroe bootloader). It has with four Mikroe Click bus
interfaces in addition to standard Arduino connectors. This board
features the Microchip PIC32MZ2048EFH100 MCU running at 200 MHz
(252Mhz capable).
config ARCH_BOARD_FLIPNCLICK_SAM3X
bool "Mikroe Flip&Click SAM3X"
depends on ARCH_CHIP_ATSAM3X8E
select ARCH_HAVE_LEDS
---help---
This options selects the Mikroe Flip&Click STM32X board. This board
is an Arduino-Due work-alike with four Mikroe Click bus interfaces.
Like the Arduino DUE, this board features the Atmel ATSAM3X8E MCU
running at 84 MHz.
config ARCH_BOARD_FREEDOM_K28F
bool "NXP Freedom-k28f development board"
depends on ARCH_CHIP_MK28FN2M0VMI15
select ARCH_HAVE_LEDS if !RGBLED
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select KINETIS_SDHC_PULLUP if KINETIS_SDHC # REVISIT
---help---
development board.
This port uses the NXP/FreeScale FREEDOM-K28F development board. This
board uses the Kinetis K28F MK28FN2M0VMI15 Cortex-M4 MCU.
config ARCH_BOARD_FREEDOM_K64F
bool "NXP Freedom-k64f development board"
depends on ARCH_CHIP_MK64FN1M0VLL12
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select KINETIS_SDHC_PULLUP if KINETIS_SDHC
---help---
development board.
This port uses the NXP/FreeScale FREEDOM-K64F development board. This
board uses the Kinetis K64 MK64FN1M0VLL12 Cortex-M4 MCU.
config ARCH_BOARD_FREEDOM_K66F
bool "NXP Freedom-k66f development board"
depends on ARCH_CHIP_MK66FN2M0VMD18
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select KINETIS_SDHC_PULLUP if KINETIS_SDHC
---help---
development board.
This port uses the NXP/FreeScale FREEDOM-K66F development board. This
board uses the Kinetis K66 MK66FN2M0VMD18 Cortex-M4 MCU.
config ARCH_BOARD_FREEDOM_KL25Z
bool "NXP/FreeScale Freedom KL25Z"
depends on ARCH_CHIP_MKL25Z128
select ARCH_HAVE_LEDS
---help---
This is the configuration for the NXP/FreeScale Freedom KL25Z board. This
board has the K25Z120LE3AN chip with a built-in SDA debugger.
config ARCH_BOARD_FREEDOM_KL26Z
bool "NXP/FreeScale Freedom KL26Z"
depends on ARCH_CHIP_MKL26Z128
select ARCH_HAVE_LEDS
---help---
This is the configuration for the NXP/FreeScale Freedom KL26Z board. This
board has the K26Z128VLH4 chip with a built-in SDA debugger.
config ARCH_BOARD_GAPUINO
bool "GWT gapuino board"
depends on ARCH_CHIP_GAP8
select UART_SERIALDRIVER
---help---
Nuttx port for gapuino, a GAP8 evaluation board.
config ARCH_BOARD_HYMINI_STM32V
bool "HY-Mini STM32v board"
depends on ARCH_CHIP_STM32F103VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the HY-Mini STM32v board. This board is based on the
STM32F103VCT6 chip.
config ARCH_BOARD_IMXRT1050_EVK
bool "NXP i.MX RT 1050 EVK"
depends on ARCH_CHIP_MIMXRT1052DVL6A
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the board configuration for the port of NuttX to the NXP i.MXRT
evaluation kit, MIMXRT1050-EVKB. This board features the MIMXRT1052DVL6A MCU.
config ARCH_BOARD_IMXRT1060_EVK
bool "NXP i.MX RT 1060 EVK"
depends on ARCH_CHIP_MIMXRT1062DVL6A
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the board configuration for the port of NuttX to the NXP i.MXRT
evaluation kit, MIMXRT1060-EVK. This board features the MIMXRT1062DVL6A MCU.
config ARCH_BOARD_LC823450_XGEVK
bool "ON Semiconductor LC823450-XGEVK development board"
depends on ARCH_CHIP_LC823450
select ARCH_HAVE_LEDS
---help---
This port uses the ON Semiconductor LC823450-XGEVK development board.
config ARCH_BOARD_LINCOLN60
bool "Micromint Lincoln 60 board"
depends on ARCH_CHIP_LPC1769
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Micromint Lincoln 60 board using the NXP LPC1769 MCU.
config ARCH_BOARD_KWIKSTIK_K40
bool "NXP/FreeScale KwikStik-K40 development board"
depends on ARCH_CHIP_MK40X256VLQ100
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Kinetis K40 Cortex-M4 MCU. This port uses the NXP/FreeScale KwikStik-K40
development board.
config ARCH_BOARD_LAUNCHXL_TMS57004
bool "TI LaunchXL-TMS57004"
depends on ARCH_CHIP_TMS570LS0432PZ
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
TI Hercules TMS570LS04x/03x LaunchPad Evaluation Kit (LAUNCHXL-
TMS57004) featuring the Hercules TMS570LS0432PZ chip.
config ARCH_BOARD_LM3S6432S2E
bool "Stellaris RDK-S2E Reference Design Kit"
depends on ARCH_CHIP_LM3S6432
select ARCH_HAVE_LEDS
---help---
Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to
Serial module.
config ARCH_BOARD_LM3S6965EK
bool "Stellaris LM3S6965 Evaluation Kit"
depends on ARCH_CHIP_LM3S6965
select ARCH_HAVE_LEDS
---help---
Stellaris LM3S6965 Evaluation Kit. This board is based on the
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
config ARCH_BOARD_LM3S8962EK
bool "Stellaris LMS38962 Evaluation Kit"
depends on ARCH_CHIP_LM3S8962
select ARCH_HAVE_LEDS
---help---
Stellaris LMS38962 Evaluation Kit.
config ARCH_BOARD_LM4F120_LAUNCHPAD
bool "Stellaris LM4F120 LaunchPad"
depends on ARCH_CHIP_LM4F120
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Stellaris LM4F120 LaunchPad.
config ARCH_BOARD_LPCXPRESSO_LPC1115
bool "NXP LPCXpresso LPC1115"
depends on ARCH_CHIP_LPC1115
select ARCH_HAVE_LEDS
---help---
The Embedded Artists LPCXpresso LPC1115 board featuring the NXP
LPC1115 MCU.
config ARCH_BOARD_LPCXPRESSO
bool "NXP LPCExpresso LPC1768"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
Embedded Artists base board with NXP LPCExpresso LPC1768. This board
is based on the NXP LPC1768. The Code Red toolchain is used by default.
config ARCH_BOARD_LPCXPRESSO_LPC54628
bool "NXP LPCXpresso LPC54628"
depends on ARCH_CHIP_LPC54628
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
LPCXpresso LPC54626 board featuring the NXP LPC54628 MCU.
config ARCH_BOARD_BAMBINO_200E
bool "Micromint Bambino 200E"
depends on ARCH_CHIP_LPC4330FBD144
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Micromint Bambino board. This board is based on the LPC4330FBD144.
config ARCH_BOARD_LPC4330_XPLORER
bool "NXG LPC4330-Xplorer"
depends on ARCH_CHIP_LPC4330FET100
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
NXG Technologies LPC4330 Xplorer board. This board is based on the
LPC4330FET100. The Code Red toolchain is used by default.
config ARCH_BOARD_LPC4337_WS
bool "WaveShare LPC4337-WS"
depends on ARCH_CHIP_LPC4337JBD144
---help---
The WaveShare LPC4337-ws board featuring the NXP LPC4337JBD144 MCU.
config ARCH_BOARD_LPC4357_EVB
bool "NXP LPC4357-EVB"
depends on ARCH_CHIP_LPC4357FET256
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
NXP Technologies LPC4357 EVB board. This board is based on the
LPC4357FET256.
config ARCH_BOARD_LPC4370_LINK2
bool "NXP LPC4370-Link2"
depends on ARCH_CHIP_LPC4370FET100
select ARCH_HAVE_LEDS
---help---
NXP LPC4370 Link2 board. This board is based on the
LPC4370FET100. The Code Red toolchain is used by default.
config ARCH_BOARD_MAX32660_EVSYS
bool "Maxim Integrated MAX32660-EVSYS"
depends on ARCH_CHIP_MAX32660
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This option enables support the Maxim Integrated MAX32660-EVSYS
board.
config ARCH_BOARD_MBED
bool "mbed LCP1768"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
This option enables support the mbed board (http://mbed.org)
that features the NXP LPC1768 microcontroller. This OS is also
built with the arm-nuttx-elf toolchain*. STATUS: Contributed.
config ARCH_BOARD_MCB1700
bool "Keil MCB1700"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
The configurations in this directory support the Keil MCB1700.
config ARCH_BOARD_MCU123_LPC214X
bool "mcu123.com LPC2148 Development Board"
depends on ARCH_CHIP_LPC214X
select ARCH_HAVE_LEDS
---help---
This port is for the NXP LPC2148 as provided on the mcu123.com
lpc214x development board. This OS is also built with the arm-nuttx-elf
toolchain*. The port supports serial, timer0, spi, and usb.
config ARCH_BOARD_METRO_M4
bool "Adafruit M4 Metro"
depends on ARCH_CHIP_SAMD51J19
select ARCH_HAVE_LEDS
---help---
---help---
This configuration is the port of NuttX to the Adafruit Metro M4.
The Metro M4 uses a Arduino form factor and and pinout. It's powered
with an ATSAMD51J19
config ARCH_BOARD_MICROPENDOUS3
bool "Opendous Micropendous 3 board"
depends on ARCH_CHIP_AT90USB646 || ARCH_CHIP_AT90USB647 || ARCH_CHIP_AT90USB1286 || ARCH_CHIP_AT90USB1287
---help---
This is a port to the Opendous Micropendous 3 board. This board may
be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU.
Support is configured for the AT90USB647.
config ARCH_BOARD_MISOC
bool "Qemu LM32 demo"
depends on ARCH_CHIP_LM32
---help---
This configuration is port to NuttX running on a Qemu LM32 system.
You can find the Qemu setup at https://bitbucket.org/key2/qemu
config ARCH_BOARD_MOTEINO_MEGA
bool "LowPowerLab MoteinoMEGA"
depends on ARCH_CHIP_ATMEGA1284P
select ARCH_HAVE_LEDS
---help---
This is placeholder for the LowPowerLab MoteinoMEGA that is based
on the Atmel AVR ATMega1284P MCU. There is not much there yet and what is
there is untested due to tool-related issues.
config ARCH_BOARD_NE64BADGE
bool "FEG NE64 /PoE Badge board"
depends on ARCH_CHIP_MCS92S12NEC64
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Future Electronics Group NE64 /PoE Badge board based on the
MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain.
STATUS: Under development. The port is code-complete but has
not yet been fully tested.
config ARCH_BOARD_NTOSD_DM320
bool "Neuros OSD v1.0 Dev Board"
depends on ARCH_CHIP_DM320
select ARCH_HAVE_LEDS
---help---
This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf
toolchain*: see
http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home
There are some differences between the Dev Board and the currently
available commercial v1.0 Boards. See
http://wiki.neurostechnology.com/index.php/OSD_Developer_Board_v1
NuttX operates on the ARM9EJS of this dual core processor.
STATUS: This port is code complete, verified, and included in the
NuttX 0.2.1 release.
config ARCH_BOARD_NRF52_PCA10040
bool "NRF52 PCA10040 eval board"
depends on ARCH_CHIP_NRF52
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
PCA10040 Evaluation board
config ARCH_BOARD_LPC1766STK
bool "Olimex LPC1766-STK board"
depends on ARCH_CHIP_LPC1766
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under
Linux or Cygwin. STATUS: Complete and mature.
config ARCH_BOARD_MAPLE
bool "maple board"
depends on ARCH_CHIP_STM32F103RB || ARCH_CHIP_STM32F103CB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the LeafLab's Maple and Maple Mini boards.
These boards are based on the STM32F103RBT6 chip for the standard
version and on the STM32F103CBT6 for the mini version
(See http://leaflabs.com/docs/hardware/maple.html)
config ARCH_BOARD_MIRTOO
bool "Mirtoo PIC32 Module from Dimitech"
depends on ARCH_CHIP_PIC32MX250F128D
select ARCH_HAVE_LEDS
---help---
This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip
PIC32MX250F128D. See http://www.dimitech.com/ for further information.
config ARCH_BOARD_MOXA
bool "Moxa board"
depends on ARCH_CHIP_MOXART
---help---
Moxa
config ARCH_BOARD_NUTINY_NUC120
bool "Nuvoton NuTiny NUC120"
depends on ARCH_CHIP_NUC120LE3AN
select ARCH_HAVE_LEDS
---help---
This is the port to the Nuvoton NuTiny EVB 120 board. This board uses a
Nuvoton NUC120 chip, specifically the NUC120LE3AN. See http://www.nuvoton.com/
for further information.
config ARCH_BOARD_OLIMEX_EFM32G880F128_STK
bool "Olimex EFM32G880F128 STK"
depends on ARCH_CHIP_EFM32G880F128
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects the Olimex EFM32G880F128 STK
config ARCH_BOARD_OLIMEXLPC2378
bool "Olimex-lpc2378 board"
depends on ARCH_CHIP_LPC2378
select ARCH_HAVE_LEDS
---help---
This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. STATUS: ostest and NSH configurations available.
This port for the NXP LPC2378 was contributed by Rommel Marcelo.
config ARCH_BOARD_OLIMEX_LPC_H3131
bool "Olimex LPC-H3131 Development board"
depends on ARCH_CHIP_LPC3131
select ARCH_HAVE_LEDS
---help---
Olimex LPC-H3131 development board. This board is based on the
NXP LPC3131 MCU.
config ARCH_BOARD_OLIMEX_STRP711
bool "Olimex STR-P711 board"
depends on ARCH_CHIP_STR71X
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for
further information. STATUS: Configurations for the basic OS test and NSH
are complete and verified.
config ARCH_BOARD_OLIMEX_STM32H405
bool "Olimex STM32 H405 board"
depends on ARCH_CHIP_STM32F405RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 H405 board and a GNU arm-nuttx-elf
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F405RGT6
MCU.
config ARCH_BOARD_OLIMEX_STM32H407
bool "Olimex STM32 H407 board"
depends on ARCH_CHIP_STM32F407ZG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 H407 board and a GNU arm-nuttx-elf
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F407ZGT6 (144pins).
config ARCH_BOARD_OLIMEX_STM32E407
bool "Olimex STM32 E407 board"
depends on ARCH_CHIP_STM32F407ZG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Olimex STM32 E407 board based on the STMicro STM32F407ZGT6 (144pins).
config ARCH_BOARD_OLIMEX_STM32P107
bool "Olimex STM32 P107 board"
depends on ARCH_CHIP_STM32F107VC
---help---
This port uses the Olimex STM32 P107 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.olimex.com for further information. This
board features the STMicro STM32F107VC MCU
config ARCH_BOARD_OLIMEX_STM32P207
bool "Olimex STM32 P207 board"
depends on ARCH_CHIP_STM32F207ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 P207 board and a GNU arm-nuttx-elf
toolchain under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F207ZE MCU
config ARCH_BOARD_OLIMEX_STM32P407
bool "Olimex STM32 P407 board"
depends on ARCH_CHIP_STM32F407ZG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 P407 board and a GNU arm-nuttx-elf
toolchain under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F407ZG MCU
config ARCH_BOARD_OLIMEXINO_STM32
bool "Olimexino STM32 board"
depends on ARCH_CHIP_STM32F103RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimexino STM32 board and a GNU arm-nuttx-elf
toolchain under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F103RBT6 MCU.
Contributed by David Sidrane.
config ARCH_BOARD_OPEN1788
bool "Wave Share Open1788"
depends on ARCH_CHIP_LPC1788
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Wave Share Open1788 board. See the
http://wvshare.com/product/Open1788-Standard.htm for further
information. This board features the NXP LPC1788 MCU
config ARCH_BOARD_OR1K
bool "OpenRISC generic board"
depends on ARCH_CHIP_MOR1KX
select ARCH_HAVE_LEDS
---help---
Generic OpenRISC board.
config ARCH_BOARD_P112
bool "P112 Z180-based platform"
depends on ARCH_CHIP_Z8018216FSG
---help---
The P112 is notable because it was the first of the hobbyist single board
computers to reach the production stage. The P112 hobbyist computers
were relatively widespread and inspired other hobbyist centered home brew
computing projects such as N8VEM home brew computing project. The P112
project still maintains many devoted enthusiasts and has an online
repository of software and other information.
The P112 computer originated as a commercial product of "D-X Designs Pty
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
boards was discussed. David Griffith decided to produce additional P112 kits
with Dave Brooks blessing and the assistance of others. In addition Terry
Gulczynski makes additional P112 derivative hobbyist home brew computers.
Hal Bower was very active in the mid 1990's on the P112 project and ported
the "Banked/Portable BIOS".
config ARCH_BOARD_PCDUINO_A10
bool "pcDuino A10"
depends on ARCH_CHIP_A10
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the port of NuttX to the Allwinner A10-based pcDuino v1
board. See http://www.pcduino.com/ for information about pcDuino Lite, v1,
and v2. I have not compared these boards in detail, but I believe that
the differences are cosmetic. This port was developed on the v1 board,
but the others may be compatible.
config ARCH_BOARD_PIC32MX_STARTERKIT
bool "Microchip PIC32MX Ethernet Starter Kit (DM320004)"
depends on ARCH_CHIP_PIC32MX795F512L
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the Microchip PIC32 Ethernet Starter Kit
(DM320004) with the Multimedia Expansion Board (MEB, DM320005).
See www.microchip.com for further information.
config ARCH_BOARD_PIC32MX7MMB
bool "Mikroelektronika PIC32MX7 MMB"
depends on ARCH_CHIP_PIC32MX795F512L
select ARCH_HAVE_LEDS
---help---
This is the port NuttX to the Mikroelektronika PIC32MX7 Multimedia Board
(MMB). See http://www.mikroe.com/ for further information.
config ARCH_BOARD_PIC32MZ_STARTERKIT
bool "Microchip PIC32MZ Ethernet Starter Kit ((DM320006)"
depends on ARCH_CHIP_PIC32MZ2048ECH || ARCH_CHIP_PIC32MZ2048ECM
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS if PIC32MZ_GPIOIRQ_PORTB
---help---
This is the port of NuttX to the Microchip PIC32MZ Embedded
Connectivity (EC) Starter Kit. There are two configurations of the
starter kit:
1) The PIC32MZ Embedded Connectivity Starter Kit based on the
PIC32MZ2048ECH144-I/PH chip (DM320006), and
2) The PIC32MZ Embedded Connectivity Starter Kit based on the
PIC32MZ2048ECM144-I/PH w/Crypto Engine (DM320006-C)
See www.microchip.com for further information.
config ARCH_BOARD_NR5M100_NEXYS4
bool "NEXT RISC-V NR5M100 on Nexys-4 board"
depends on ARCH_CHIP_NR5M100
select UART_SERIALDRIVER
---help---
This is the port NuttX to the NEXT RISC-V processor runnining on a Digilent
Nexys-4 (non DDR version) FPGA board.
config ARCH_BOARD_NUCLEO_144
bool "STMicro NUCLEO-144"
depends on ARCH_CHIP_STM32F722ZE || ARCH_CHIP_STM32F746ZG || ARCH_CHIP_STM32F767ZI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo-144 development board featuring STMicroelectronics
F2, F3, F4, F7 and L4 MCU families. The board is a "Hardware pattern"
that can be populated with the 144 pin package of the following MCUs:
Target STM32 Order code
STM32F207ZGT6 NUCLEO-F207ZG
STM32F303ZET6 NUCLEO-F303ZE
STM32F429ZIT6 NUCLEO-F429ZI
STM32F446ZET6 NUCLEO-F446ZE
STM32F722ZET6 NUCLEO-F722ZE
STM32F746ZGT6 NUCLEO-F746ZG
STM32F767ZIT6 NUCLEO-F767ZI
STM32L496ZGT6 NUCLEO-L496ZG
STM32L496ZGT6P NUCLEO-L496ZG-P
Supported in this configuration are:
NUCLEO-F722ZE - STM32F722ZET6 a 216MHz Cortex-M7, w/FPU -
512KiB Flash memory and 256KiB SRAM.
NUCLEO-F746ZG - STM32F746ZGT6 a 216MHz Cortex-M7, w/FPU -
1024KiB Flash memory and 320KiB SRAM.
NUCLEO-F767ZI - STM32F767ZIT6 a 216MHz Cortex-M7, w/DPFPU -
2048KiB Flash memory and 512KiB SRAM.
config ARCH_BOARD_NUCLEO_L496ZG
bool "STM32L496 Nucleo L496ZG"
depends on ARCH_CHIP_STM32L496ZG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo-144 development board featuring STMicroelectronics
F2, F3, F4, F7 and L4 MCU families. The board is a "Hardware pattern"
that can be populated with the 144 pin package of the following MCUs:
Target STM32 Order code
STM32F207ZGT6 NUCLEO-F207ZG
STM32F303ZET6 NUCLEO-F303ZE
STM32F429ZIT6 NUCLEO-F429ZI
STM32F446ZET6 NUCLEO-F446ZE
STM32F746ZGT6 NUCLEO-F746ZG
STM32F767ZIT6 NUCLEO-F767ZI
STM32L496ZGT6 NUCLEO-L496ZG
STM32L496ZGT6P NUCLEO-L496ZG-P
Supported in this configuration are:
NUCLEO-L496ZG - STM32L496ZGT6 a 80MHz Cortex-M4, w/FPU -
1024KiB Flash memory and 320KiB SRAM.
config ARCH_BOARD_NUCLEO_F072RB
bool "STM32F072 Nucleo F072RB"
depends on ARCH_CHIP_STM32F072RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F072RB board based on the STMicro STM32F072RBT6 MCU.
config ARCH_BOARD_NUCLEO_F091RC
bool "STM32F091 Nucleo F091RC"
depends on ARCH_CHIP_STM32F091RC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F091RC board based on the STMicro STM32F091RCT6 MCU.
config ARCH_BOARD_NUCLEO_F302R8
bool "STM32F303 Nucleo F302R8"
depends on ARCH_CHIP_STM32F302R8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F302R8 board based on the STMicro STM32F302R8T6 MCU.
config ARCH_BOARD_NUCLEO_F303RE
bool "STM32F303 Nucleo F303RE"
depends on ARCH_CHIP_STM32F303RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F303RE board based on the STMicro STM32F303RET6 MCU.
config ARCH_BOARD_NUCLEO_F303ZE
bool "STM32F303 Nucleo F303ZE"
depends on ARCH_CHIP_STM32F303ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F303ZE board based on the STMicro STM32F303ZET6 MCU.
config ARCH_BOARD_NUCLEO_F334R8
bool "STM32F334 Nucleo F334R8"
depends on ARCH_CHIP_STM32F334R8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo F334R8 board based on the STMicro STM32F334R8 MCU.
config ARCH_BOARD_NUCLEO_F401RE
bool "STM32F401 Nucleo F401RE"
depends on ARCH_CHIP_STM32F401RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F401RE in the NuttX source tree.
config ARCH_BOARD_NUCLEO_F410RB
bool "STM32F410 Nucleo F410RB"
depends on ARCH_CHIP_STM32F410RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F410RB in the NuttX source tree.
config ARCH_BOARD_NUCLEO_F411RE
bool "STM32F411 Nucleo F411RE"
depends on ARCH_CHIP_STM32F411RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
Nucleo F411RE in the NuttX source tree.
config ARCH_BOARD_NUCLEO_H743ZI
bool "STM32H743 Nucleo H743ZI"
depends on ARCH_CHIP_STM32H743ZI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
# TODO: select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo H743ZI board based on the STMicro STM32H743ZI MCU.
config ARCH_BOARD_NUCLEO_L432KC
bool "STM32L432 Nucleo-32 L432KC"
depends on ARCH_CHIP_STM32L432KC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo-32 L432KC board based on the STMicro STM32L432KCU6 MCU.
config ARCH_BOARD_NUCLEO_L452RE
bool "STM32L452 Nucleo L452RE"
depends on ARCH_CHIP_STM32L452RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo L452RE board based on the STMicro STM32L452RET6 MCU.
config ARCH_BOARD_NUCLEO_L476RG
bool "STM32L476 Nucleo L476RG"
depends on ARCH_CHIP_STM32L476RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo L476RG board based on the STMicro STM32L476RGT6 MCU.
config ARCH_BOARD_RASPBERRY_PIZERO
bool "Raspberry Pi Zero"
depends on ARCH_CHIP_BCM2835
---help---
This is the port of NuttX to the Raspberry Pi Zero. There are two
versions of the Raspberry Pi Zero: (1) This standard version and
(2) the Raspberry Pi Zero W with wireless support (selected with
CONFIG_ARCH_BOARD_RASPBERRY_PIZEROW.
config ARCH_BOARD_RASPBERRY_PIZEROW
bool "Raspberry Pi Zero W"
depends on ARCH_CHIP_BCM2835
---help---
This is the port of NuttX to the Raspberry Pi Zero W. There are two
versions of the Raspberry Pi Zero: (1) This standard version
(selected with CONFIG_ARCH_BOARD_RASPBERRY_PIZEROW) and (2) this
Raspberry Pi Zero W version with wireless support.
config ARCH_BOARD_QEMU_I486
bool "Qemu i486 Mode"
depends on ARCH_X86 || ARCH_I486
---help---
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
hardwared (Google the Bifferboard).
config ARCH_BOARD_SABRE_6QUAD
bool "NXP/Freescale i.MX6 Sabre-6Quad board"
depends on ARCH_CHIP_IMX6_6QUAD
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This options selects support for NuttX on the NXP/Freescale Sabre
board featuring the iMX 6Quad CPU.
config ARCH_BOARD_SAMA5D2_XULT
bool "Atmel SAMA5D2 Xplained Ultra development board"
depends on ARCH_CHIP_ATSAMA5D27
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAMA5D2-XULT development board
config ARCH_BOARD_SAMA5D3X_EK
bool "Atmel SAMA5D3x-EK development board"
depends on ARCH_CHIP_ATSAMA5D31 || ARCH_CHIP_ATSAMA5D33 || ARCH_CHIP_ATSAMA5D34 || ARCH_CHIP_ATSAMA5D35
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAMA5D3x-EK development board (where x=1,3,4, or 5).
config ARCH_BOARD_SAMA5D3_XPLAINED
bool "Atmel SAMA5D3 Xplained development board"
depends on ARCH_CHIP_ATSAMA5D36
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAMA5D3 Xplained development board.
config ARCH_BOARD_SAMA5D4_EK
bool "Atmel SAMA5D4-EK development board"
depends on ARCH_CHIP_ATSAMA5D44
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAMA5D4-EK development board
config ARCH_BOARD_SAMD20_XPLAINED
bool "Atmel SAMD20-Xplained Pro development board"
depends on ARCH_CHIP_SAMD20J18
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAMD20-Xplained Pro development board.
This board features the ATSAMD20J18A MCU (Cortex-M0+ with 256KB of FLASH
and 32KB of SRAM).
config ARCH_BOARD_SAMD21_XPLAINED
bool "Atmel SAMD21-Xplained Pro development board"
depends on ARCH_CHIP_SAMD21J18A
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAMD21-Xplained Pro development board.
This board features the ATSAMD21J18A MCU (Cortex-M0+ with 256KB of FLASH
and 32KB of SRAM).
config ARCH_BOARD_SAML21_XPLAINED
bool "Atmel SAML21-Xplained Pro development board"
depends on ARCH_CHIP_SAML21J18
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAML21-Xplained Pro development board.
This board features the ATSAML21J18A MCU (Cortex-M0+ with 256KB of FLASH
and 32KB of SRAM).
config ARCH_BOARD_SAM3UEK
bool "Atmel SAM3U-EK development board"
depends on ARCH_CHIP_ATSAM3U4E
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM3U-EK development board.
config ARCH_BOARD_SAM4CMP_DB
bool "Atmel SAM4CMP-DB development board"
depends on ARCH_CHIP_ATSAM4CMP16B
---help---
The port of NuttX to the Atmel SAM4CMP-DB development board.
config ARCH_BOARD_SAM4EEK
bool "Atmel SAM4E-EK development board"
depends on ARCH_CHIP_ATSAM4E16E
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAM4E-EK development board. This
board features the SAM4E16 MCU running at up to 120MHz.
config ARCH_BOARD_SAM4L_XPLAINED
bool "Atmel SAM4L-Xplained Pro development board"
depends on ARCH_CHIP_ATSAM4LC4C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM4L-Xplained Pro development board.
config ARCH_BOARD_SAM4S_XPLAINED
bool "Atmel SAM4S-Xplained development board"
depends on ARCH_CHIP_ATSAM4S16C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM4S-Xplained development board.
config ARCH_BOARD_SAM4S_XPLAINED_PRO
bool "Atmel SAM4S-Xplained Pro development board"
depends on ARCH_CHIP_ATSAM4SD32C
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The port of NuttX to the Atmel SAM4S-Xplained Pro development board.
config ARCH_BOARD_SAME70_XPLAINED
bool "Atmel SAME70 Xplained evaluation board"
depends on ARCH_CHIP_SAME70Q21
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAME70 Xplained evaluation board.
config ARCH_BOARD_SAMV71_XULT
bool "Atmel SAMV71 Xplained Ultra evaluation board"
depends on ARCH_CHIP_SAMV71Q21
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_PHY_INTERRUPT if NETDEVICES
---help---
The port of NuttX to the Atmel SAMV71 Xplained Ultra evaluation board.
config ARCH_BOARD_SHENZHOU
bool "Shenzhou STM32F107 board"
depends on ARCH_CHIP_STM32F107VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Shenzhou STM32 F107 board and a GNU arm-nuttx-elf toolchain* under
Linux or Cygwin. See the http://www.armjishu.com for further information. This
board features the STMicro STM32F107VC MCU
config ARCH_BOARD_SKP16C26
bool "Renesas SKP16C26 StarterKit"
depends on ARCH_CHIP_M30262F8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port
uses the GNU m32c toolchain. STATUS: The port is complete but untested
due to issues with compiler internal errors.
config ARCH_BOARD_PHOTON
bool "Photon wifi board"
depends on ARCH_CHIP_STM32F205RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the Photon from Particle Devices
(https://www.particle.io). This board features the STM32F205RGY6
MCU from STMicro.
config ARCH_BOARD_STM32_BUTTERFLY2
bool "Kamami STM32Butterfly2 development board"
depends on ARCH_CHIP_STM32F107VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
A configuration for the Kamami STM32Butterfly2 development board
based on STM32F107VC micro-controler chip with optional ETH
board. See
https://kamami.pl/zestawy-uruchomieniowe-stm32/178507-stm32butterfly2.html
config ARCH_BOARD_STM32_TINY
bool "STM32-Tiny board"
depends on ARCH_CHIP_STM32F103C8
select ARCH_HAVE_LEDS
---help---
A configuration for the STM32 Tiny board. This board is based on a
STM32F103C8T6 micro-controller chip, and is (always ?) bundled with
an nRF24L01+ wireless module.
config ARCH_BOARD_STM32F103_MINIMUM
bool "STM32F103C8T6 Minimum ARM Development Board"
depends on ARCH_CHIP_STM32F103C8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
A configuration for the STM32F103 Minimum board.
config ARCH_BOARD_STM3210E_EVAL
bool "STMicro STM3210E-EVAL development board"
depends on ARCH_CHIP_STM32F103ZE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6
microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3
toolchain.
config ARCH_BOARD_STM3220G_EVAL
bool "STMicro STM3220G-EVAL development board"
depends on ARCH_CHIP_STM32F207IG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG
microcontroller (ARM Cortex-M3).
config ARCH_BOARD_STM3240G_EVAL
bool "STMicro STM3240G-EVAL development board"
depends on ARCH_CHIP_STM32F407IG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6
microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4
toolchain (such as CodeSourcery).
config ARCH_BOARD_STM32F051_DISCOVERY
bool "STMicro STM32F051-Discovery board"
depends on ARCH_CHIP_STM32F051R8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F051-Discovery board based on the STMicro ARCH_CHIP_STM32F051R8 MCU.
config ARCH_BOARD_STM32F072_DISCOVERY
bool "STMicro STM32F072-Discovery board"
depends on ARCH_CHIP_STM32F072RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F072-Discovery board based on the STMicro ARCH_CHIP_STM32F072RB MCU.
config ARCH_BOARD_STM32F3_DISCOVERY
bool "STMicro STM32F3-Discovery board"
depends on ARCH_CHIP_STM32F303VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F3-Discovery board based on the STMicro STM32F303VCT6 MCU.
config ARCH_BOARD_STM32F334_DISCO
bool "STMicro STM32F334-Discovery board"
depends on ARCH_CHIP_STM32F334C8
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F334-Discovery board based on the STMicro STM32F334C8T6 MCU.
config ARCH_BOARD_STM32F4_DISCOVERY
bool "STMicro STM32F4-Discovery board"
depends on ARCH_CHIP_STM32F407VG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F4-Discovery board based on the STMicro STM32F407VGT6 MCU.
config ARCH_BOARD_STM32F411E_DISCO
bool "STMicro STM32F411E-Discovery board"
depends on ARCH_CHIP_STM32F411VE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is a minimal configuration that supports low-level test of the
STMicro STM32F411E-Discovery Board.
config ARCH_BOARD_STM32F429I_DISCO
bool "STMicro STM32F429I-Discovery board"
depends on ARCH_CHIP_STM32F429Z
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F429I-Discovery board based on the STMicro STM32F429ZIT6 MCU.
config ARCH_BOARD_STM32F746G_DISCO
bool "STMicro STM32F746G-Discovery board"
depends on ARCH_CHIP_STM32F746NG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F746G-DISCO development board featuring the STM32F746NGH6
MCU. The STM32F746NGH6 is a 216MHz Cortex-M7 operation with 1024Kb Flash
memory and 320Kb SRAM.
config ARCH_BOARD_STM32F769I_DISCO
bool "STMicro STM32F769I-Discovery board"
depends on ARCH_CHIP_STM32F769NI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32F769I-DISCO development board featuring the STM32F769NIH6
MCU. The STM32F769NIH6 is a 216MHz Cortex-M7 with 2048Kb Flash
memory and 512Kb SRAM.
config ARCH_BOARD_STM32F746_WS
bool "Waveshare STM32F746 board"
depends on ARCH_CHIP_STM32F746IG
---help---
Waveshare STM32F746 development board featuring the STM32F746IG MCU.
config ARCH_BOARD_B_L475E_IOT01A
bool "STMicro IoT Discovery kit"
depends on ARCH_CHIP_STM32L475VG
select ARCH_HAVE_LEDS
---help---
STMicro IoT development board featuring the STM32L475VG
MCU. The STM32L475VG is a Cortex-M4 optimised for low-power operation
at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM.
config ARCH_BOARD_STM32L476VG_DISCO
bool "STMicro STM32L476VG -Discovery board"
depends on ARCH_CHIP_STM32L476RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L476VG_DISCO development board featuring the STM32L476VG
MCU. The STM32L476VG is a Cortex-M4 optimised for low-power operation
at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM.
config ARCH_BOARD_STM32L4R9AI_DISCO
bool "STMicro STM32L4R9AI -Discovery board"
depends on ARCH_CHIP_STM32L4R9AI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L4R9AI_DISCO development board featuring the STM32L4R9AI
MCU. The STM32L4R9AI is a Cortex-M4 optimised for low-power operation
at up to 120MHz operation with 2048Kb Flash memory and 192+64+384Kb SRAM.
config ARCH_BOARD_STM32L476_MDK
bool "Motorola Mods Development Kit (MDK)"
depends on ARCH_CHIP_STM32L476RG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Motorola Mods Development Board (MDK) features STM32L476ME MCU.
The STM32L476ME is a Cortex-M4 optimised for low-power operation
at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM.
config ARCH_BOARD_STM32L_DISCOVERY
bool "STMicro STM32L-Discovery board"
depends on ARCH_CHIP_STM32L152RB || ARCH_CHIP_STM32L152RC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32L-Discovery board based on the STMicro STM32L152RBT6 or
STM32L1 MCUs.
config ARCH_BOARD_STM32VL_DISCOVERY
bool "STMicro STM32VL-Discovery board"
depends on ARCH_CHIP_STM32F100RB
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro STM32VL-Discovery board based on the STMicro STM32F100RB MCU.
config ARCH_BOARD_MIKROE_STM32F4
bool "MikroElektronika Mikromedia for STM32F4 board"
depends on ARCH_CHIP_STM32F407VG
---help---
This is the port NuttX to the Mikroelektronika Mikromedia for STM32F4 Multimedia Board
(MMB). See http://www.mikroe.com/ for further information.
config ARCH_BOARD_SUREPIC32MX
bool "Sure PIC32MX boards"
depends on ARCH_CHIP_PIC32MX440F512H
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure
Electronics (http://www.sureelectronics.net/). This board features
the MicroChip PIC32MX440F512H. See also
http://www.sureelectronics.net/goods.php?id=1168 for further
information about the Sure DB-DP11215 board.
config ARCH_BOARD_TEENSY_20
bool "PJRC Teensy++ 2.0 board"
depends on ARCH_CHIP_AT90USB1286
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
on an Atmel AT90USB1286 MCU.
config ARCH_BOARD_TEENSY_3X
bool "PJRC Teensy++ 3.1 board"
depends on ARCH_CHIP_MK20DX256VLH7 || ARCH_CHIP_MK20DX128VLH5
select ARCH_HAVE_LEDS
---help---
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
on an Atmel AT90USB1286 MCU.
This is the port of NuttX to the Teensy-3.1 from PJRC
(https://www.pjrc.com/). The Teensy-3.1 features the Freescale
MK30DX256VLH7 chip (now NXP). The MK30DX256VLH7 is a 64-pin Cortex-M4
running at 72MHz. It has 256KiB of program FLASH memory and 64KiB of
SRAM. For more information about the Teensy 3.1, see
https://www.pjrc.com/teensy/teensy31.html
https://www.pjrc.com/store/teensy31.html
This board configuration can also be used with the older Teensy-3.0. The
Teensy-3.0 has the same schematic (although some pins are not used on the
Teensy-3.0). the primary difference is that the Teensy 3.0 has a
MK20DX128VLH5 with slightly less capability.
config ARCH_BOARD_TEENSY_LC
bool "Teensy LC"
depends on ARCH_CHIP_MKL25Z64
select ARCH_HAVE_LEDS
---help---
This is the configuration for the Teensy LC board.
See https://www.pjrc.com/teensy/teensyLC.html. The
Teensy LC is based on the Freescale KL25Z.
config ARCH_BOARD_TM4C123G_LAUNCHPAD
bool "Tiva TM4C123G LaunchPad"
depends on ARCH_CHIP_TM4C123GH6PMI
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Tiva TM4C123G LaunchPad.
config ARCH_BOARD_TM4C1294_LAUNCHPAD
bool "Tiva EK-TM4C1294XL LaunchPad"
depends on ARCH_CHIP_TM4C1294NC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
Tiva EK-TM4C1294XL LaunchPad.
config ARCH_BOARD_TMS570LS31X_USB_KIT
bool "TI TMS570LS31X_USB_KIT"
depends on ARCH_CHIP_TMS570LS3137ZWT
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
TI Hercules TMS570LS31xx Evaluation Kit (TMDS570ls31xx USB Kit)
featuring the Hercules TMS570LS3137ZWT chip.
config ARCH_BOARD_TWR_K60N512
bool "FreeScale TWR-K60N512 development board"
depends on ARCH_CHIP_MK60N512VMD100
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512
development board.
config ARCH_BOARD_TWR_K64F120M
bool "Freescale TWR-K64F120M development board"
depends on ARCH_CHIP_MK64FN1M0VMD12
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Kinetis K64 Cortex-M4 MCU. This port uses the Freescale TWR-K64F120M
development board.
config ARCH_BOARD_U_BLOX_C027
bool "u-blox C027"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
u-blox GSM and GPS module evaluation board with NXP LPCExpresso
LPC1768. The GSM module is one of LISA-C200, LISA-U200 or SARA-G350.
The GPS module is one of MAX-M7 or MAX-M8.
config ARCH_BOARD_UBW32
bool "UBW32 v2.4 board from Sparkfun"
depends on ARCH_CHIP_PIC32MX460F512L
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the port to the Sparkfun UBW32 board. This port uses the original v2.4
board which is based on the MicroChip PIC32MX460F512L. See
http://www.sparkfun.com/products/8971. This older version has been replaced
with this board http://www.sparkfun.com/products/9713. See also
http://www.schmalzhaus.com/UBW32/.
config ARCH_BOARD_US7032EVB1
bool "Hitachi SH-1/US7032EVB1 board"
depends on ARCH_CHIP_SH7032
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
STATUS: Work has just began on this port.
config ARCH_BOARD_VIEWTOOL_STM32F107
bool "ViewTool STM32F103/F107"
depends on ARCH_CHIP_STM32F107VC || ARCH_CHIP_STM32F103VC
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
---help---
This port uses the ViewTool STM32F103/F107 V1.2 board. This
board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
See http://www.viewtool.com/ for further information.
config ARCH_BOARD_XMC4500RELAX
bool "Infineon XMC4500 Relax"
depends on ARCH_CHIP_XMC4500
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
Infineon XMC4000 Relax Lite v1
config ARCH_BOARD_Z16F2800100ZCOG
bool "Zilog Z16F2800100ZCOG Development Kit"
depends on ARCH_CHIP_Z16F2811
select ARCH_HAVE_LEDS
---help---
z16f Microcontroller. This port uses the ZiLOG z16f2800100zcog
development kit and the Zilog ZDS-II Windows command line tools. The
development environment is Cygwin under WinXP.
config ARCH_BOARD_Z80SIM
bool "Z80 Instruction Set Simulator"
depends on ARCH_CHIP_Z80
select UART_SERIALDRIVER
---help---
z80 Microcontroller. This port uses a Z80 instruction set simulator
called z80sim. This port also uses the SDCC toolchain
(http://sdcc.sourceforge.net/") (verified with version 2.6.0).
config ARCH_BOARD_Z8ENCORE000ZCO
bool "ZiLOG Z8ENCORE000ZCO Development Kit"
depends on ARCH_CHIP_Z8F6403
select ARCH_HAVE_LEDS
---help---
z8Encore! Microcontroller. This port use the ZiLOG Z8ENCORE000ZCO
development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_Z8F64200100KIT
bool "ZiLOG Z8F64200100KIT Development Kit"
depends on ARCH_CHIP_Z8F6423
select ARCH_HAVE_LEDS
---help---
z8Encore! Microcontroller. This port use the Zilog Z8F64200100KIT
development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
config ARCH_BOARD_ZP214XPA
bool "The0.net LPC2148 Development Board"
depends on ARCH_CHIP_LPC214X
---help---
This port is for the NXP LPC2148 as provided on the The0.net
ZPA213X/4XPA development board. Includes support for the
UG-2864AMBAG01 OLED also from The0.net
config ARCH_BOARD_ZKITARM
bool "Zilogic ZKit-ARM-1769 Development Kit"
depends on ARCH_CHIP_LPC1768
select ARCH_HAVE_LEDS
---help---
Zilogic System's ARM development Kit, ZKIT-ARM-1769. This board is based
on the NXP LPC1769. The Nuttx Buildroot toolchain is used by default.
config ARCH_BOARD_SIM
bool "User mode simulation"
depends on ARCH_SIM
---help---
A user-mode port of NuttX to the x86 Linux/Cygwin platform is available.
The purpose of this port is primarily to support OS feature development.
This port does not support interrupts or a real timer (and hence no
round robin scheduler) Otherwise, it is complete.
config ARCH_BOARD_CUSTOM
bool "Custom development board"
---help---
Select this option if there is no directory for the board under configs/.
Don't see the board you want? You must first select the exact MCU part
number, then the boards supporting that part will be available for selection.
endchoice
if ARCH_BOARD_CUSTOM
menu "Custom Board Configuration"
config ARCH_BOARD_CUSTOM_NAME
string "Custom board name"
default ""
---help---
This is a name for the board. It is not used except to return the
information via the NSH uname command.
config ARCH_BOARD_CUSTOM_DIR
string "Custom board directory"
default ""
---help---
If the custom board configuration is selected, then it is necessary
to also tell the build system where it can find the board directory
for the custom board.
In this case, the board directory is assume to lie outside the
NuttX directory. The provided path must then be a full, absolute
path to some location outside of the NuttX source tree (like
"~/projects/myboard").
config ARCH_BOARD_CUSTOM_DIR_RELPATH
bool "Relative custom board directory"
default y
---help---
Specifies that the board directory is relative to the NuttX directory.
config BOARD_CUSTOM_LEDS
bool "Custom board LEDs"
default n
select ARCH_HAVE_LEDS
config BOARD_CUSTOM_BUTTONS
bool "Custom board buttons"
default n
select ARCH_HAVE_BUTTONS
select ARCH_BUTTONS
config BOARD_CUSTOM_IRQBUTTONS
bool "Custom Board IRQ buttons"
default n
depends on BOARD_CUSTOM_BUTTONS
select ARCH_HAVE_IRQBUTTONS
select ARCH_IRQBUTTONS
config BOARD_CUSTOM_INTERRUPT
bool "Custom board PHY interrupts"
default n
depends on NETDEVICES
select ARCH_PHY_INTERRUPT if NETDEVICES
endmenu # Custom Board Configuration
endif #ARCH_BOARD_CUSTOM
config ARCH_BOARD
string
default "amber" if ARCH_BOARD_AMBER
default "arduino-mega2560" if ARCH_BOARD_ARDUINO_MEGA2560
default "arduino-due" if ARCH_BOARD_ARDUINO_DUE
default "avr32dev1" if ARCH_BOARD_AVR32DEV1
default "bambino-200e" if ARCH_BOARD_BAMBINO_200E
default "c5471evm" if ARCH_BOARD_C5471EVM
default "clicker2-stm32" if ARCH_BOARD_CLICKER2_STM32
default "cloudctrl" if ARCH_BOARD_CLOUDCTRL
default "demo9s12ne64" if ARCH_BOARD_DEMOS92S12NEC64
default "dk-tm4c129x" if ARCH_BOARD_DK_TM4C129X
default "ea3131" if ARCH_BOARD_EA3131
default "ea3152" if ARCH_BOARD_EA3152
default "eagle100" if ARCH_BOARD_EAGLE100
default "efm32-g8xx-stk" if ARCH_BOARD_EFM32G8XXSTK
default "efm32gg-stk3700" if ARCH_BOARD_EFM32GG_STK3700
default "ekk-lm3s9b96" if ARCH_BOARD_EKKLM3S9B96
default "esp32-core" if ARCH_BOARD_ESP32CORE
default "ez80f910200kitg" if ARCH_BOARD_EZ80F910200KITG
default "ez80f910200zco" if ARCH_BOARD_EZ80F910200ZCO
default "fire-stm32v2" if ARCH_BOARD_FIRE_STM32
default "flipnclick-pic32mz" if ARCH_BOARD_FLIPNCLICK_PIC32MZ
default "flipnclick-sam3x" if ARCH_BOARD_FLIPNCLICK_SAM3X
default "freedom-k28f" if ARCH_BOARD_FREEDOM_K28F
default "freedom-k64f" if ARCH_BOARD_FREEDOM_K64F
default "freedom-k66f" if ARCH_BOARD_FREEDOM_K66F
default "freedom-kl25z" if ARCH_BOARD_FREEDOM_KL25Z
default "freedom-kl26z" if ARCH_BOARD_FREEDOM_KL26Z
default "gapuino" if ARCH_BOARD_GAPUINO
default "hymini-stm32v" if ARCH_BOARD_HYMINI_STM32V
default "imxrt1050-evk" if ARCH_BOARD_IMXRT1050_EVK
default "imxrt1060-evk" if ARCH_BOARD_IMXRT1060_EVK
default "kwikstik-k40" if ARCH_BOARD_KWIKSTIK_K40
default "launchxl-tms57004" if ARCH_BOARD_LAUNCHXL_TMS57004
default "lc823450-xgevk" if ARCH_BOARD_LC823450_XGEVK
default "lincoln60" if ARCH_BOARD_LINCOLN60
default "lm3s6432-s2e" if ARCH_BOARD_LM3S6432S2E
default "lm3s6965-ek" if ARCH_BOARD_LM3S6965EK
default "lm3s8962-ek" if ARCH_BOARD_LM3S8962EK
default "lm4f120-launchpad" if ARCH_BOARD_LM4F120_LAUNCHPAD
default "lpc4330-xplorer" if ARCH_BOARD_LPC4330_XPLORER
default "lpc4337-ws" if ARCH_BOARD_LPC4337_WS
default "lpc4357-evb" if ARCH_BOARD_LPC4357_EVB
default "lpc4370-link2" if ARCH_BOARD_LPC4370_LINK2
default "lpcxpresso-lpc1115" if ARCH_BOARD_LPCXPRESSO_LPC1115
default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO
default "lpcxpresso-lpc54628" if ARCH_BOARD_LPCXPRESSO_LPC54628
default "maple" if ARCH_BOARD_MAPLE
default "max32660-evsys" if ARCH_BOARD_MAX32660_EVSYS
default "mbed" if ARCH_BOARD_MBED
default "mcb1700" if ARCH_BOARD_MCB1700
default "mcu123-lpc214x" if ARCH_BOARD_MCU123_LPC214X
default "metro-m4" if ARCH_BOARD_METRO_M4
default "micropendous3" if ARCH_BOARD_MICROPENDOUS3
default "mirtoo" if ARCH_BOARD_MIRTOO
default "misoc" if ARCH_BOARD_MISOC
default "moteino-mega" if ARCH_BOARD_MOTEINO_MEGA
default "ne64badge" if ARCH_BOARD_NE64BADGE
default "nrf52-pca10040" if ARCH_BOARD_NRF52_PCA10040
default "ntosd-dm320" if ARCH_BOARD_NTOSD_DM320
default "nucleo-144" if ARCH_BOARD_NUCLEO_144
default "nucleo-f072rb" if ARCH_BOARD_NUCLEO_F072RB
default "nucleo-f091rc" if ARCH_BOARD_NUCLEO_F091RC
default "nucleo-f302r8" if ARCH_BOARD_NUCLEO_F302R8
default "nucleo-f303re" if ARCH_BOARD_NUCLEO_F303RE
default "nucleo-f303ze" if ARCH_BOARD_NUCLEO_F303ZE
default "nucleo-f334r8" if ARCH_BOARD_NUCLEO_F334R8
default "nucleo-f4x1re" if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
default "nucleo-f410rb" if ARCH_BOARD_NUCLEO_F410RB
default "nucleo-h743zi" if ARCH_BOARD_NUCLEO_H743ZI
default "nucleo-l432kc" if ARCH_BOARD_NUCLEO_L432KC
default "nucleo-l452re" if ARCH_BOARD_NUCLEO_L452RE
default "nucleo-l476rg" if ARCH_BOARD_NUCLEO_L476RG
default "nucleo-l496zg" if ARCH_BOARD_NUCLEO_L496ZG
default "nutiny-nuc120" if ARCH_BOARD_NUTINY_NUC120
default "nr5m100-nexys4" if ARCH_BOARD_NR5M100_NEXYS4
default "olimex-efm32g880f128-stk" if ARCH_BOARD_OLIMEX_EFM32G880F128_STK
default "olimex-lpc1766stk" if ARCH_BOARD_LPC1766STK
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378
default "olimex-lpc-h3131" if ARCH_BOARD_OLIMEX_LPC_H3131
default "olimex-stm32-h405" if ARCH_BOARD_OLIMEX_STM32H405
default "olimex-stm32-h407" if ARCH_BOARD_OLIMEX_STM32H407
default "olimex-stm32-e407" if ARCH_BOARD_OLIMEX_STM32E407
default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107
default "olimex-stm32-p207" if ARCH_BOARD_OLIMEX_STM32P207
default "olimex-stm32-p407" if ARCH_BOARD_OLIMEX_STM32P407
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711
default "olimexino-stm32" if ARCH_BOARD_OLIMEXINO_STM32
default "open1788" if ARCH_BOARD_OPEN1788
default "or1k" if ARCH_BOARD_OR1K
default "p112" if ARCH_BOARD_P112
default "pcduino-a10" if ARCH_BOARD_PCDUINO_A10
default "pic32mx-starterkit" if ARCH_BOARD_PIC32MX_STARTERKIT
default "pic32mx7mmb" if ARCH_BOARD_PIC32MX7MMB
default "pic32mz-starterkit" if ARCH_BOARD_PIC32MZ_STARTERKIT
default "pizero" if ARCH_BOARD_RASPBERRY_PIZERO || ARCH_BOARD_RASPBERRY_PIZEROW
default "qemu-i486" if ARCH_BOARD_QEMU_I486
default "sabre-6quad" if ARCH_BOARD_SABRE_6QUAD
default "sama5d2-xult" if ARCH_BOARD_SAMA5D2_XULT
default "sama5d3x-ek" if ARCH_BOARD_SAMA5D3X_EK
default "sama5d3-xplained" if ARCH_BOARD_SAMA5D3_XPLAINED
default "sama5d4-ek" if ARCH_BOARD_SAMA5D4_EK
default "samd20-xplained" if ARCH_BOARD_SAMD20_XPLAINED
default "samd21-xplained" if ARCH_BOARD_SAMD21_XPLAINED
default "saml21-xplained" if ARCH_BOARD_SAML21_XPLAINED
default "sam3u-ek" if ARCH_BOARD_SAM3UEK
default "sam4cmp-db" if ARCH_BOARD_SAM4CMP_DB
default "sam4e-ek" if ARCH_BOARD_SAM4EEK
default "sam4l-xplained" if ARCH_BOARD_SAM4L_XPLAINED
default "sam4s-xplained" if ARCH_BOARD_SAM4S_XPLAINED
default "sam4s-xplained-pro" if ARCH_BOARD_SAM4S_XPLAINED_PRO
default "same70-xplained" if ARCH_BOARD_SAME70_XPLAINED
default "samv71-xult" if ARCH_BOARD_SAMV71_XULT
default "shenzhou" if ARCH_BOARD_SHENZHOU
default "skp16c26" if ARCH_BOARD_SKP16C26
default "photon" if ARCH_BOARD_PHOTON
default "stm32butterfly2" if ARCH_BOARD_STM32_BUTTERFLY2
default "stm32_tiny" if ARCH_BOARD_STM32_TINY
default "stm32f051-discovery" if ARCH_BOARD_STM32F051_DISCOVERY
default "stm32f072-discovery" if ARCH_BOARD_STM32F072_DISCOVERY
default "stm32f103-minimum" if ARCH_BOARD_STM32F103_MINIMUM
default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL
default "stm3220g-eval" if ARCH_BOARD_STM3220G_EVAL
default "stm3240g-eval" if ARCH_BOARD_STM3240G_EVAL
default "stm32f3discovery" if ARCH_BOARD_STM32F3_DISCOVERY
default "stm32f334-disco" if ARCH_BOARD_STM32F334_DISCO
default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY
default "stm32f411e-disco" if ARCH_BOARD_STM32F411E_DISCO
default "stm32f429i-disco" if ARCH_BOARD_STM32F429I_DISCO
default "stm32f746g-disco" if ARCH_BOARD_STM32F746G_DISCO
default "stm32f769i-disco" if ARCH_BOARD_STM32F769I_DISCO
default "stm32f746-ws" if ARCH_BOARD_STM32F746_WS
default "b-l475e-iot01a" if ARCH_BOARD_B_L475E_IOT01A
default "stm32l476vg-disco" if ARCH_BOARD_STM32L476VG_DISCO
default "stm32l476-mdk" if ARCH_BOARD_STM32L476_MDK
default "stm32l4r9ai-disco" if ARCH_BOARD_STM32L4R9AI_DISCO
default "stm32ldiscovery" if ARCH_BOARD_STM32L_DISCOVERY
default "stm32vldiscovery" if ARCH_BOARD_STM32VL_DISCOVERY
default "mikroe-stm32f4" if ARCH_BOARD_MIKROE_STM32F4
default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX
default "teensy-2.0" if ARCH_BOARD_TEENSY_20
default "teensy-3.x" if ARCH_BOARD_TEENSY_3X
default "teensy-lc" if ARCH_BOARD_TEENSY_LC
default "tm4c123g-launchpad" if ARCH_BOARD_TM4C123G_LAUNCHPAD
default "tm4c1294-launchpad" if ARCH_BOARD_TM4C1294_LAUNCHPAD
default "tms570ls31x-usb-kit" if ARCH_BOARD_TMS570LS31X_USB_KIT
default "twr-k60n512" if ARCH_BOARD_TWR_K60N512
default "twr-k64f120m" if ARCH_BOARD_TWR_K64F120M
default "u-blox-c027" if ARCH_BOARD_U_BLOX_C027
default "ubw32" if ARCH_BOARD_UBW32
default "us7032evb1" if ARCH_BOARD_US7032EVB1
default "viewtool-stm32f107" if ARCH_BOARD_VIEWTOOL_STM32F107
default "xmc4500-relax" if ARCH_BOARD_XMC4500RELAX
default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG
default "z80sim" if ARCH_BOARD_Z80SIM
default "z8encore000zco" if ARCH_BOARD_Z8ENCORE000ZCO
default "z8f64200100kit" if ARCH_BOARD_Z8F64200100KIT
default "zp214xpa" if ARCH_BOARD_ZP214XPA
default "zkit-arm-1769" if ARCH_BOARD_ZKITARM
default "sim" if ARCH_BOARD_SIM
default "moxa" if ARCH_BOARD_MOXA
comment "Common Board Options"
config ARCH_HAVE_LEDS
bool
config ARCH_LEDS
bool "Board LED Status support"
default y
depends on ARCH_HAVE_LEDS
---help---
Use board LEDs to show NuttX execution status state. Unique to boards that have LEDs
config ARCH_HAVE_BUTTONS
bool
config ARCH_BUTTONS
bool "Board button support"
default n
depends on ARCH_HAVE_BUTTONS
---help---
"Support interfaces to use buttons provided by the board."
config ARCH_HAVE_IRQBUTTONS
bool
config ARCH_IRQBUTTONS
bool "Button interrupt support"
default n
depends on ARCH_BUTTONS && ARCH_HAVE_IRQBUTTONS
---help---
"Support interrupts on button presses and releases."
comment "Board-Specific Options"
if ARCH_BOARD_AMBER
source "configs/amber/Kconfig"
endif
if ARCH_BOARD_ARDUINO_MEGA2560
source "configs/arduino-mega2560/Kconfig"
endif
if ARCH_BOARD_ARDUINO_DUE
source "configs/arduino-due/Kconfig"
endif
if ARCH_BOARD_AVR32DEV1
source "configs/avr32dev1/Kconfig"
endif
if ARCH_BOARD_BAMBINO_200E
source "configs/bambino-200e/Kconfig"
endif
if ARCH_BOARD_C5471EVM
source "configs/c5471evm/Kconfig"
endif
if ARCH_BOARD_CLICKER2_STM32
source "configs/clicker2-stm32/Kconfig"
endif
if ARCH_BOARD_CLOUDCTRL
source "configs/cloudctrl/Kconfig"
endif
if ARCH_BOARD_DEMOS92S12NEC64
source "configs/demo9s12ne64/Kconfig"
endif
if ARCH_BOARD_DK_TM4C129X
source "configs/dk-tm4c129x/Kconfig"
endif
if ARCH_BOARD_EA3131
source "configs/ea3131/Kconfig"
endif
if ARCH_BOARD_EA3152
source "configs/ea3152/Kconfig"
endif
if ARCH_BOARD_EAGLE100
source "configs/eagle100/Kconfig"
endif
if ARCH_BOARD_EFM32G8XXSTK
source "configs/efm32-g8xx-stk/Kconfig"
endif
if ARCH_BOARD_EFM32GG_STK3700
source "configs/efm32gg-stk3700/Kconfig"
endif
if ARCH_BOARD_EKKLM3S9B96
source "configs/ekk-lm3s9b96/Kconfig"
endif
if ARCH_BOARD_ESP32CORE
source "configs/esp32-core/Kconfig"
endif
if ARCH_BOARD_EZ80F910200KITG
source "configs/ez80f910200kitg/Kconfig"
endif
if ARCH_BOARD_EZ80F910200ZCO
source "configs/ez80f910200zco/Kconfig"
endif
if ARCH_BOARD_FIRE_STM32
source "configs/fire-stm32v2/Kconfig"
endif
if ARCH_BOARD_FLIPNCLICK_PIC32MZ
source "configs/flipnclick-pic32mz/Kconfig"
endif
if ARCH_BOARD_FLIPNCLICK_SAM3X
source "configs/flipnclick-sam3x/Kconfig"
endif
if ARCH_BOARD_FREEDOM_K28F
source "configs/freedom-k28f/Kconfig"
endif
if ARCH_BOARD_FREEDOM_K64F
source "configs/freedom-k64f/Kconfig"
endif
if ARCH_BOARD_FREEDOM_K66F
source "configs/freedom-k66f/Kconfig"
endif
if ARCH_BOARD_FREEDOM_KL25Z
source "configs/freedom-kl25z/Kconfig"
endif
if ARCH_BOARD_FREEDOM_KL26Z
source "configs/freedom-kl26z/Kconfig"
endif
if ARCH_BOARD_GAPUINO
source "configs/gapuino/Kconfig"
endif
if ARCH_BOARD_HYMINI_STM32V
source "configs/hymini-stm32v/Kconfig"
endif
if ARCH_BOARD_IMXRT1050_EVK
source "configs/imxrt1050-evk/Kconfig"
endif
if ARCH_BOARD_IMXRT1060_EVK
source "configs/imxrt1060-evk/Kconfig"
endif
if ARCH_BOARD_KWIKSTIK_K40
source "configs/kwikstik-k40/Kconfig"
endif
if ARCH_BOARD_LAUNCHXL_TMS57004
source "configs/launchxl-tms57004/Kconfig"
endif
if ARCH_BOARD_LC823450_XGEVK
source "configs/lc823450-xgevk/Kconfig"
endif
if ARCH_BOARD_LINCOLN60
source "configs/lincoln60/Kconfig"
endif
if ARCH_BOARD_LM3S6432S2E
source "configs/lm3s6432-s2e/Kconfig"
endif
if ARCH_BOARD_LM3S6965EK
source "configs/lm3s6965-ek/Kconfig"
endif
if ARCH_BOARD_LM3S8962EK
source "configs/lm3s8962-ek/Kconfig"
endif
if ARCH_BOARD_LM3S8962EK
source "configs/lm4f120-launchpad/Kconfig"
endif
if ARCH_BOARD_LPC4330_XPLORER
source "configs/lpc4330-xplorer/Kconfig"
endif
if ARCH_BOARD_LPC4337_WS
source "configs/lpc4337-ws/Kconfig"
endif
if ARCH_BOARD_LPC4357_EVB
source "configs/lpc4357-evb/Kconfig"
endif
if ARCH_BOARD_LPC4370_LINK2
source "configs/lpc4370-link2/Kconfig"
endif
if ARCH_BOARD_LPCXPRESSO
source "configs/lpcxpresso-lpc1768/Kconfig"
endif
if ARCH_BOARD_LPCXPRESSO_LPC54628
source "configs/lpcxpresso-lpc54628/Kconfig"
endif
if ARCH_BOARD_MAPLE
source "configs/maple/Kconfig"
endif
if ARCH_BOARD_MAX32660_EVSYS
source "configs/max32660-evsys/Kconfig"
endif
if ARCH_BOARD_MBED
source "configs/mbed/Kconfig"
endif
if ARCH_BOARD_MCB1700
source "configs/mcb1700/Kconfig"
endif
if ARCH_BOARD_MCU123_LPC214X
source "configs/mcu123-lpc214x/Kconfig"
endif
if ARCH_BOARD_METRO_M4
source "configs/metro-m4/Kconfig"
endif
if ARCH_BOARD_MICROPENDOUS3
source "configs/micropendous3/Kconfig"
endif
if ARCH_BOARD_MIKROE_STM32F4
source "configs/mikroe-stm32f4/Kconfig"
endif
if ARCH_BOARD_MIRTOO
source "configs/mirtoo/Kconfig"
endif
if ARCH_BOARD_MISOC
source "configs/misoc/Kconfig"
endif
if ARCH_BOARD_MOTEINO_MEGA
source "configs/moteino-mega/Kconfig"
endif
if ARCH_BOARD_MOXA
source "configs/moxa/Kconfig"
endif
if ARCH_BOARD_NE64BADGE
source "configs/ne64badge/Kconfig"
endif
if ARCH_BOARD_NRF52_PCA10040
source "configs/nrf52-pca10040/Kconfig"
endif
if ARCH_BOARD_NTOSD_DM320
source "configs/ntosd-dm320/Kconfig"
endif
if ARCH_BOARD_NUCLEO_144
source "configs/nucleo-144/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F072RB
source "configs/nucleo-f072rb/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F091RC
source "configs/nucleo-f091rc/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F303RE
source "configs/nucleo-f303re/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F303ZE
source "configs/nucleo-f303ze/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F334R8
source "configs/nucleo-f334r8/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
source "configs/nucleo-f4x1re/Kconfig"
endif
if ARCH_BOARD_NUCLEO_F410RB
source "configs/nucleo-f410rb/Kconfig"
endif
if ARCH_BOARD_NUCLEO_H743ZI
source "configs/nucleo-h743zi/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L432KC
source "configs/nucleo-l432kc/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L452RE
source "configs/nucleo-l452re/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L476RG
source "configs/nucleo-l476rg/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L496ZG
source "configs/nucleo-l496zg/Kconfig"
endif
if ARCH_BOARD_NUTINY_NUC120
source "configs/nutiny-nuc120/Kconfig"
endif
if ARCH_BOARD_OLIMEX_EFM32G880F128_STK
source "configs/olimex-efm32g880f128-stk/Kconfig"
endif
if ARCH_BOARD_LPC1766STK
source "configs/olimex-lpc1766stk/Kconfig"
endif
if ARCH_BOARD_OLIMEXLPC2378
source "configs/olimex-lpc2378/Kconfig"
endif
if ARCH_BOARD_OLIMEX_LPC_H3131
source "configs/olimex-lpc-h3131/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32H405
source "configs/olimex-stm32-h405/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32H407
source "configs/olimex-stm32-h407/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32E407
source "configs/olimex-stm32-e407/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32P107
source "configs/olimex-stm32-p107/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32P207
source "configs/olimex-stm32-p207/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STM32P407
source "configs/olimex-stm32-p407/Kconfig"
endif
if ARCH_BOARD_OLIMEX_STRP711
source "configs/olimex-strp711/Kconfig"
endif
if ARCH_BOARD_OLIMEXINO_STM32
source "configs/olimexino-stm32/Kconfig"
endif
if ARCH_BOARD_OPEN1788
source "configs/open1788/Kconfig"
endif
if ARCH_BOARD_OR1K
source "configs/or1k/Kconfig"
endif
if ARCH_BOARD_PCDUINO_A10
source "configs/pcduino-a10/Kconfig"
endif
if ARCH_BOARD_PIC32MX_STARTERKIT
source "configs/pic32mx-starterkit/Kconfig"
endif
if ARCH_BOARD_PIC32MX7MMB
source "configs/pic32mx7mmb/Kconfig"
endif
if ARCH_BOARD_PIC32MZ_STARTERKIT
source "configs/pic32mz-starterkit/Kconfig"
endif
if ARCH_BOARD_RASPBERRY_PIZERO || ARCH_BOARD_RASPBERRY_PIZEROW
source "configs/pizero/Kconfig"
endif
if ARCH_BOARD_QEMU_I486
source "configs/qemu-i486/Kconfig"
endif
if ARCH_BOARD_SABRE_6QUAD
source "configs/sabre-6quad/Kconfig"
endif
if ARCH_BOARD_SAMA5D2_XULT
source "configs/sama5d2-xult/Kconfig"
endif
if ARCH_BOARD_SAMA5D3X_EK
source "configs/sama5d3x-ek/Kconfig"
endif
if ARCH_BOARD_SAMA5D3_XPLAINED
source "configs/sama5d3-xplained/Kconfig"
endif
if ARCH_BOARD_SAMA5D4_EK
source "configs/sama5d4-ek/Kconfig"
endif
if ARCH_BOARD_SAMD20_XPLAINED
source "configs/samd20-xplained/Kconfig"
endif
if ARCH_BOARD_SAMD21_XPLAINED
source "configs/samd21-xplained/Kconfig"
endif
if ARCH_BOARD_SAML21_XPLAINED
source "configs/saml21-xplained/Kconfig"
endif
if ARCH_BOARD_SAM3UEK
source "configs/sam3u-ek/Kconfig"
endif
if ARCH_BOARD_SAM4CMP_DB
source "configs/sam4cmp-db/Kconfig"
endif
if ARCH_BOARD_SAM4EEK
source "configs/sam4e-ek/Kconfig"
endif
if ARCH_BOARD_SAM4L_XPLAINED
source "configs/sam4l-xplained/Kconfig"
endif
if ARCH_BOARD_SAM4S_XPLAINED
source "configs/sam4s-xplained/Kconfig"
endif
if ARCH_BOARD_SAM4S_XPLAINED_PRO
source "configs/sam4s-xplained-pro/Kconfig"
endif
if ARCH_BOARD_SAME70_XPLAINED
source "configs/same70-xplained/Kconfig"
endif
if ARCH_BOARD_SAMV71_XULT
source "configs/samv71-xult/Kconfig"
endif
if ARCH_BOARD_SHENZHOU
source "configs/shenzhou/Kconfig"
endif
if ARCH_BOARD_SKP16C26
source "configs/skp16c26/Kconfig"
endif
if ARCH_BOARD_PHOTON
source "configs/photon/Kconfig"
endif
if ARCH_BOARD_STM32_BUTTERFLY2
source "configs/stm32butterfly2/Kconfig"
endif
if ARCH_BOARD_STM32_TINY
source "configs/stm32_tiny/Kconfig"
endif
if ARCH_BOARD_STM32F051_DISCOVERY
source "configs/stm32f051-discovery/Kconfig"
endif
if ARCH_BOARD_STM32F072_DISCOVERY
source "configs/stm32f072-discovery/Kconfig"
endif
if ARCH_BOARD_STM32F103_MINIMUM
source "configs/stm32f103-minimum/Kconfig"
endif
if ARCH_BOARD_STM3210E_EVAL
source "configs/stm3210e-eval/Kconfig"
endif
if ARCH_BOARD_STM3220G_EVAL
source "configs/stm3220g-eval/Kconfig"
endif
if ARCH_BOARD_STM3240G_EVAL
source "configs/stm3240g-eval/Kconfig"
endif
if ARCH_BOARD_STM32F334_DISCO
source "configs/stm32f334-disco/Kconfig"
endif
if ARCH_BOARD_STM32F4_DISCOVERY
source "configs/stm32f4discovery/Kconfig"
endif
if ARCH_BOARD_STM32F411E_DISCO
source "configs/stm32f411e-disco/Kconfig"
endif
if ARCH_BOARD_STM32F429I_DISCO
source "configs/stm32f429i-disco/Kconfig"
endif
if ARCH_BOARD_STM32F746G_DISCO
source "configs/stm32f746g-disco/Kconfig"
endif
if ARCH_BOARD_STM32F769I_DISCO
source "configs/stm32f769i-disco/Kconfig"
endif
if ARCH_BOARD_B_L475E_IOT01A
source "configs/b-l475e-iot01a/Kconfig"
endif
if ARCH_BOARD_STM32F746_WS
source "configs/stm32f746-ws/Kconfig"
endif
if ARCH_BOARD_STM32L476VG_DISCO
source "configs/stm32l476vg-disco/Kconfig"
endif
if ARCH_BOARD_STM32L476_MDK
source "configs/stm32l476-mdk/Kconfig"
endif
if ARCH_BOARD_STM32L_DISCOVERY
source "configs/stm32ldiscovery/Kconfig"
endif
if ARCH_BOARD_STM32VL_DISCOVERY
source "configs/stm32vldiscovery/Kconfig"
endif
if ARCH_BOARD_SUREPIC32MX
source "configs/sure-pic32mx/Kconfig"
endif
if ARCH_BOARD_TEENSY_20
source "configs/teensy-2.0/Kconfig"
endif
if ARCH_BOARD_TEENSY_3X
source "configs/teensy-3.x/Kconfig"
endif
if ARCH_BOARD_TEENSY_LC
source "configs/teensy-lc/Kconfig"
endif
if ARCH_BOARD_TM4C123G_LAUNCHPAD
source "configs/tm4c123g-launchpad/Kconfig"
endif
if ARCH_BOARD_TM4C1294_LAUNCHPAD
source "configs/tm4c1294-launchpad/Kconfig"
endif
if ARCH_BOARD_TMS570LS31X_USB_KIT
source "configs/tms570ls31x-usb-kit/Kconfig"
endif
if ARCH_BOARD_TWR_K60N512
source "configs/twr-k60n512/Kconfig"
endif
if ARCH_BOARD_TWR_K64F120M
source "configs/twr-k64f120m/Kconfig"
endif
if ARCH_BOARD_U_BLOX_C027
source "configs/u-blox-c027/Kconfig"
endif
if ARCH_BOARD_UBW32
source "configs/ubw32/Kconfig"
endif
if ARCH_BOARD_US7032EVB1
source "configs/us7032evb1/Kconfig"
endif
if ARCH_BOARD_VIEWTOOL_STM32F107
source "configs/viewtool-stm32f107/Kconfig"
endif
if ARCH_BOARD_XMC4500RELAX
source "configs/xmc4500-relax/Kconfig"
endif
if ARCH_BOARD_Z16F2800100ZCOG
source "configs/z16f2800100zcog/Kconfig"
endif
if ARCH_BOARD_Z80SIM
source "configs/z80sim/Kconfig"
endif
if ARCH_BOARD_Z8ENCORE000ZCO
source "configs/z8encore000zco/Kconfig"
endif
if ARCH_BOARD_Z8F64200100KIT
source "configs/z8f64200100kit/Kconfig"
endif
if ARCH_BOARD_ZP214XPA
source "configs/zp214xpa/Kconfig"
endif
if ARCH_BOARD_ZKITARM
source "configs/zkit-arm-1769/Kconfig"
endif
if ARCH_BOARD_SIM
source "configs/sim/Kconfig"
endif
if ARCH_BOARD_CUSTOM
source "configs/dummy/Kconfig"
endif
config BOARD_CRASHDUMP
bool "Enable Board level logging of crash dumps"
default n
---help---
If selected up_assert will call out to board_crashdump, in the case
of an assertion failure, prior to calling exit. Or in the
case of a hardfault prior to looping indefinitely. board_crashdump
then has a chance to save the state of the machine.
The purpose of board_crashdump is to save as much information as it can
about the cause of the fault and then most likely reset the system.
N.B. There is limited system resources that can be used, who knows
what memory is trashed? So all we can expect to do is save the
"machine state" in a place where on the next reset can write it
to more sophisticated storage in a sane operating environment.
config BOARD_ENTROPY_POOL
bool "Enable Board level storing of entropy pool structure"
default n
depends on CRYPTO_RANDOM_POOL
---help---
Entropy pool structure can be provided by board source.
Use for this is, for example, to allocate entropy pool
from special area of RAM which content is kept over
system reset.
config BOARD_INITRNGSEED
bool "Enable Board level initial seeding of entropy pool RNG"
default n
depends on CRYPTO_RANDOM_POOL
---help---
If enabled, entropy pool random number generator will call
board_init_rndseed() upon initialization. This function
can then provide early entropy seed to the pool through
entropy injection APIs provided at 'nuttx/random.h'.
#endif
config LIB_BOARDCTL
bool "Enable boardctl() interface"
default n
---help---
Enables support for the boardctl() interface. Architecture
specific logic must provide board_app_initialize() interface.
if LIB_BOARDCTL
config BOARDCTL_FINALINIT
bool "Enable board app final init"
default n
---help---
Enables support for the BOARDIOC_FINALINIT boardctl() command.
Architecture specific logic must provide board_app_finalinitialize()
interface.
config BOARDCTL_POWEROFF
bool "Enable power off interfaces"
default n
depends on ARCH_HAVE_POWEROFF
---help---
Enables support for the BOARDIOC_POWEROFF boardctl() command.
Architecture specific logic must provide the board_power_off()
interface.
config BOARDCTL_RESET
bool "Enable reset interfaces"
default n
depends on ARCH_HAVE_RESET
---help---
Enables support for the BOARDIOC_RESET boardctl() command.
Architecture specific logic must provide the board_reset()
interface.
config BOARD_RESET_ON_ASSERT
int "Enable Board Reset after assert"
default 0
depends on BOARDCTL_RESET
---help---
== 0 up_assert never reset the machine
>= 1 up_assert from interrupt handler or IDLE thread will reset the
machine
>= 2 up_assert from user or kernel thread will reset the machine.
The default behavior is just to kill the asserting thread.
config BOARD_ASSERT_RESET_VALUE
int "Board reset argument"
default 0
depends on BOARDCTL_RESET
---help---
Parameter that will be passed to board_reset() by when an
assertion occurs. This may be used by board_reset()
implementations to handle the reset differently for the
case of a crash.
config BOARDCTL_UNIQUEID
bool "Return board unique ID"
default n
---help---
Enables support for the BOARDIOC_UNIQUEID boardctl() command.
Architecture specific logic must provide the board_uniqueid()
interface.
config BOARDCTL_UNIQUEID_SIZE
int "Size of the board unique ID (bytes)"
default 16
depends on BOARDCTL_UNIQUEID
---help---
Provides the size of the memory buffer that must be provided by the
caller of board_uniqueid() in which to receive the board unique ID.
config BOARDCTL_APP_SYMTAB
bool "Enable application symbol table interfaces"
default n
---help---
Enables support for the BOARDIOC_APP_SYMTAB boardctl() command.
config BOARDCTL_OS_SYMTAB
bool "Enable kernel module symbol table interfaces"
default n
depends on MODULE
---help---
Enables support for the BOARDIOC_OS_SYMTAB boardctl() command.
config BOARDCTL_USBDEVCTRL
bool "Enable USB device controls"
default n
depends on USBDEV
---help---
Enables support for the BOARDIOC_USBDEV_CONTROL boardctl() command.
config BOARDCTL_IOCTL
bool "Board-specific boardctl() commands"
default n
---help---
Enables support for the BOARDIOC_POWEROFF boardctl() command.
Architecture specific logic must provide board_ioctl() interface.
endif # LIB_BOARDCTL