nuttx

History

Xiang Xiao d32e9c38df boards: Move the C/C++ search path to the common place so all boards support uClibc++/libc++ automatically Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: Ibe6fafbec57f7acb26ea6188a3e9923ea82295c5		2020-07-13 15:11:12 -03:00
..
configs/usbnsh	boards: Remove the unused CONFIG_xxx_CXXINITIALIZE=y	2020-07-01 10:41:37 -06:00
include	Refine the preprocessor conditional guard style (#190 )	2020-01-31 19:07:39 +01:00
scripts	boards: Move the C/C++ search path to the common place	2020-07-13 15:11:12 -03:00
src	Fix nxstyle issue	2020-06-07 19:28:10 +01:00
Kconfig	Merged in alinjerpelea/nuttx (pull request #967 )	2019-08-07 20:49:39 +00:00
README.txt	Merged in alinjerpelea/nuttx (pull request #967 )	2019-08-07 20:49:39 +00:00

README.txt

README
======

The NuttX configuration for the Olimex STM32-H405 is based on the configuration
Olimex STM32-P207.

It was tested with the NuttX EABI "buildroot" Toolchain.

Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.

Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults
to '/dev/console' which makes problems with the shell over USB.

The following peripherals are enabled in this configuration.
 - LED:        Shows the system status

 - Button:     Built in app 'buttons' works.

 - ADC:        ADC1 samples ADC_IN1. Built in app 'adc' works.

 - USB-FS-OTG: The console is running on the virtual serial port. Note that you
               have to press enter three times until NSH appears.

 - CAN:        Built in app 'can' is enabled but not tested, since no CAN transceiver
               is on board.