62 lines
2.0 KiB
Plaintext
62 lines
2.0 KiB
Plaintext
README
|
|
======
|
|
|
|
The B-G431B-ESC Discovery kit board is based on the STM32G431CB microcontroller,
|
|
the L6387 driver and STL180N6F7 power MOSFETs.
|
|
|
|
UART/USART PINS
|
|
---------------
|
|
|
|
USART2 is accessible through J3 pads and ST LINK Virtual Console:
|
|
USART2_TX - PB3
|
|
USART2_RX - PB4
|
|
|
|
Configuration Sub-directories
|
|
-------------------------
|
|
|
|
nsh:
|
|
---
|
|
Configures the NuttShell (nsh) located at apps/examples/nsh. The
|
|
Configuration enables the serial interfaces on USART2.
|
|
|
|
foc_f32 and foc_b16:
|
|
---------------------
|
|
FOC examples based on hardware on board.
|
|
|
|
Pin configuration:
|
|
|
|
Board Function Chip Function Chip Pin Number
|
|
-------------- -------------- ---------------
|
|
Phase U high TIM1_CH1 PA8
|
|
Phase U low TIM1_CH1N PC13
|
|
Phase V high TIM1_CH2 PA9
|
|
Phase V low TIM1_CH2N PA12
|
|
Phase W high TIM1_CH3 PA10
|
|
Phase W low TIM1_CH3N PB15
|
|
Current U + OPAMP1_VINP PA1
|
|
Current U - OPAMP1_VINM PA3
|
|
Current V + OPAMP2_VINP PA7
|
|
Current V - OPAMP2_VINM PA5
|
|
Current W + OPAMP3_VINP PB0
|
|
Current W - OPAMP3_VINM PB2
|
|
Temperature PB14
|
|
VBUS ADC1_IN1 PA0
|
|
POT ADC1_IN11 PB12
|
|
LED GPIO_PC6 PC6
|
|
ENCO_A/HALL_H1 TIM4_CH1 PB6
|
|
ENCO_B/HALL_H2 TIM4_CH2 PB7
|
|
ENCO_Z/HALL_H3 TIM4_CH3 PB8
|
|
BUTTON GPIO_PC10 PC10
|
|
PWM PA15
|
|
|
|
Current shunt resistance = 0.003
|
|
PGA gain = 16
|
|
Current sense gain = -9.14 (inverted current)
|
|
Vbus sense gain = 18k/(18k+169k) = 0.0962
|
|
Vbus min = ?
|
|
Vbus max = 25V
|
|
Iout max = 40A peak
|
|
|
|
IPHASE_RATIO = 1/(R_shunt*gain) = -36.47
|
|
VBUS_RATIO = 1/VBUS_gain = 10.4
|