303 lines
11 KiB
C
303 lines
11 KiB
C
/************************************************************************************
|
|
* configs/stm32l476-mdk/include/stm32l476-mdk-clocking.h
|
|
*
|
|
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
|
* Copyright (C) 2016 Motorola Mobility, LLC. All rights reserved.
|
|
* Author: dev@ziggurat29.com
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIGS_STM32L476_MDK_INCLUDE_STM32L476_MDK_CLOCKING_H
|
|
#define __CONFIGS_STM32L476_MDK_INCLUDE_STM32L476_MDK_CLOCKING_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
|
|
/* HSI - 16 MHz RC factory-trimmed
|
|
* LSI - 32 KHz RC
|
|
* HSE - not installed
|
|
* LSE - not installed
|
|
*/
|
|
|
|
#define STM32L4_HSI_FREQUENCY 16000000ul
|
|
#define STM32L4_LSI_FREQUENCY 32000
|
|
#define STM32L4_LSE_FREQUENCY 32768
|
|
|
|
#define BOARD_AHB_FREQUENCY 80000000ul
|
|
|
|
/* XXX there needs to be independent selections for the System Clock Mux and
|
|
* the PLL Source Mux; currently System Clock Mux always is PLL, and PLL
|
|
* Source Mux is chosen by the following define. This is probably OK in many
|
|
* cases, but should be separated to support other power configurations.
|
|
*/
|
|
|
|
#if 0
|
|
# define HSI_CLOCK_CONFIG /* HSI-16 clock configuration */
|
|
#else
|
|
# define MSI_CLOCK_CONFIG /* MSI @ 4 MHz autotrimmed via LSE */
|
|
#endif
|
|
|
|
#if defined(HSI_CLOCK_CONFIG)
|
|
|
|
#define STM32L4_BOARD_USEHSI 1
|
|
|
|
/* Prescaler common to all PLL inputs; will be 1 (XXX source is implicitly
|
|
as per comment above HSI) */
|
|
|
|
#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
|
|
|
|
/* 'main' PLL config; we use this to generate our system clock via the R
|
|
* output. We set it up as 16 MHz / 1 * 10 / 2 = 80 MHz
|
|
*
|
|
* XXX NOTE: currently the main PLL is implicitly turned on and is implicitly
|
|
* the system clock; this should be configurable since not all applications may
|
|
* want things done this way.
|
|
*/
|
|
|
|
#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(10)
|
|
#define STM32L4_PLLCFG_PLLP 0
|
|
#undef STM32L4_PLLCFG_PLLP_ENABLED
|
|
#define STM32L4_PLLCFG_PLLQ RCC_PLLCFG_PLLQ_2
|
|
#define STM32L4_PLLCFG_PLLQ_ENABLED
|
|
#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR_2
|
|
#define STM32L4_PLLCFG_PLLR_ENABLED
|
|
|
|
/* 'SAIPLL1' is used to generate the 48 MHz clock, since we can't
|
|
* do that with the main PLL's N value. We set N = 13, and enable
|
|
* the Q output (ultimately for CLK48) with /4. So,
|
|
* 16 MHz / 1 * 12 / 4 = 48 MHz
|
|
*
|
|
* XXX NOTE: currently the SAIPLL /must/ be explicitly selected in the
|
|
* menuconfig, or else all this is a moot point, and the various 48 MHz
|
|
* peripherals will not work (RNG at present). I would suggest removing
|
|
* that option from Kconfig altogether, and simply making it an option
|
|
* that is selected via a #define here, like all these other params.
|
|
*/
|
|
|
|
#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(12)
|
|
#define STM32L4_PLLSAI1CFG_PLLP 0
|
|
#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED
|
|
#define STM32L4_PLLSAI1CFG_PLLQ RCC_PLLSAI1CFG_PLLQ_4
|
|
#define STM32L4_PLLSAI1CFG_PLLQ_ENABLED
|
|
#define STM32L4_PLLSAI1CFG_PLLR 0
|
|
#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED
|
|
|
|
/* 'SAIPLL2' is not used in this application */
|
|
|
|
#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8)
|
|
#define STM32L4_PLLSAI2CFG_PLLP 0
|
|
#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED
|
|
#define STM32L4_PLLSAI2CFG_PLLR 0
|
|
#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED
|
|
|
|
#define STM32L4_SYSCLK_FREQUENCY 80000000ul
|
|
|
|
/* CLK48 will come from PLLSAI1 (implicitly Q) */
|
|
|
|
#define STM32L4_USE_CLK48 1
|
|
#define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLSAI1
|
|
|
|
/* Enable the LSE oscillator, used automatically trim the MSI, and for RTC */
|
|
|
|
#define STM32L4_USE_LSE 1
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (80MHz) */
|
|
|
|
#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
|
#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY
|
|
#define STM32L4_BOARD_HCLK STM32L4_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/1 (80MHz) */
|
|
|
|
#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */
|
|
#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY/1)
|
|
|
|
/* Timers driven from APB1 will be twice PCLK1 */
|
|
/* REVISIT : this can be configured */
|
|
|
|
#define STM32L4_APB1_TIM2_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM3_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM4_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM5_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM6_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM7_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
|
|
/* APB2 clock (PCLK2) is HCLK (80MHz) */
|
|
|
|
#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
|
|
#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY/1)
|
|
|
|
/* Timers driven from APB2 will be twice PCLK2 */
|
|
/* REVISIT : this can be configured */
|
|
|
|
#define STM32L4_APB2_TIM1_CLKIN (2*STM32L4_PCLK2_FREQUENCY)
|
|
#define STM32L4_APB2_TIM8_CLKIN (2*STM32L4_PCLK2_FREQUENCY)
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
|
* otherwise frequency is 2xAPBx.
|
|
* Note: TIM1,8 are on APB2, others on APB1
|
|
*/
|
|
|
|
#elif defined(MSI_CLOCK_CONFIG)
|
|
|
|
/* Use the MSI; frequ = 4 MHz; autotrim from LSE */
|
|
|
|
#define STM32L4_BOARD_USEMSI 1
|
|
#define STM32L4_BOARD_MSIRANGE RCC_CR_MSIRANGE_4M
|
|
|
|
/* Prescaler common to all PLL inputs */
|
|
|
|
#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1)
|
|
|
|
/* 'main' PLL config; we use this to generate our system clock */
|
|
|
|
#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(40)
|
|
#define STM32L4_PLLCFG_PLLP 0
|
|
#undef STM32L4_PLLCFG_PLLP_ENABLED
|
|
#define STM32L4_PLLCFG_PLLQ 0
|
|
#undef STM32L4_PLLCFG_PLLQ_ENABLED
|
|
#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR_2
|
|
#define STM32L4_PLLCFG_PLLR_ENABLED
|
|
|
|
/* 'SAIPLL1' is used to generate the 48 MHz clock */
|
|
|
|
#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(24)
|
|
#define STM32L4_PLLSAI1CFG_PLLP 0
|
|
#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED
|
|
#define STM32L4_PLLSAI1CFG_PLLQ RCC_PLLSAI1CFG_PLLQ_2
|
|
#define STM32L4_PLLSAI1CFG_PLLQ_ENABLED
|
|
#define STM32L4_PLLSAI1CFG_PLLR 0
|
|
#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED
|
|
|
|
/* 'SAIPLL2' is not used in this application */
|
|
|
|
#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8)
|
|
#define STM32L4_PLLSAI2CFG_PLLP 0
|
|
#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED
|
|
#define STM32L4_PLLSAI2CFG_PLLR 0
|
|
#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED
|
|
|
|
#define STM32L4_SYSCLK_FREQUENCY 80000000ul
|
|
|
|
/* Enable CLK48; get it from PLLSAI1 */
|
|
|
|
#define STM32L4_USE_CLK48
|
|
#define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLSAI1
|
|
|
|
/* Disable LSE (for the RTC) */
|
|
|
|
#undef STM32L4_USE_LSE
|
|
|
|
/* Configure the HCLK divisor (for the AHB bus, core, memory, and DMA */
|
|
|
|
#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
|
#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY
|
|
#define STM32L4_BOARD_HCLK STM32L4_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
|
|
|
|
/* Configure the APB1 prescaler */
|
|
|
|
#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */
|
|
#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY/1)
|
|
|
|
#define STM32L4_APB1_TIM2_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM3_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM4_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM5_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM6_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
#define STM32L4_APB1_TIM7_CLKIN (2*STM32L4_PCLK1_FREQUENCY)
|
|
|
|
/* Configure the APB2 prescaler */
|
|
|
|
#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
|
|
#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY/1)
|
|
|
|
#define STM32L4_APB2_TIM1_CLKIN (2*STM32L4_PCLK2_FREQUENCY)
|
|
#define STM32L4_APB2_TIM8_CLKIN (2*STM32L4_PCLK2_FREQUENCY)
|
|
|
|
#endif
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
|
* otherwise frequency is 2xAPBx.
|
|
* Note: TIM1,8,15,16,17 are on APB2, others on APB1
|
|
*/
|
|
|
|
#define BOARD_TIM1_FREQUENCY STM32L4_HCLK_FREQUENCY
|
|
#define BOARD_TIM2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM3_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM4_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM5_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM6_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM7_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2)
|
|
#define BOARD_TIM8_FREQUENCY STM32L4_HCLK_FREQUENCY
|
|
#define BOARD_TIM15_FREQUENCY STM32L4_HCLK_FREQUENCY
|
|
#define BOARD_TIM16_FREQUENCY STM32L4_HCLK_FREQUENCY
|
|
#define BOARD_TIM17_FREQUENCY STM32L4_HCLK_FREQUENCY
|
|
#define BOARD_LPTIM1_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2)
|
|
#define BOARD_LPTIM2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2)
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Public Function Prototypes
|
|
************************************************************************************/
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __CONFIGS_STM32L476_MDK_INCLUDE_STM32L476_MDK_CLOCKING_H */
|