sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
d5d4006c6b
nuttx/drivers/contactless/pn532.c
chao an 664927c86e mm/alloc: remove all unnecessary cast for alloc 
Fix the minor style issue and remove unnecessary cast

Signed-off-by: chao an <anchao@xiaomi.com>
2023-08-30 14:34:20 +08:00

1146 lines
28 KiB
C
Raw Blame History

/****************************************************************************
* drivers/contactless/pn532.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <nuttx/kmalloc.h>
#include <nuttx/signal.h>
#include "pn532.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Bit order H/W feature must be enabled in order to support LSB first
* operation.
*/
#if !defined(CONFIG_SPI_HWFEATURES) || !defined(CONFIG_SPI_BITORDER)
# error CONFIG_SPI_HWFEATURES=y and CONFIG_SPI_BITORDER=y required by this driver
#endif
#ifndef CONFIG_ARCH_HAVE_SPI_BITORDER
# warning This platform does not support SPI LSB-bit order
#endif
#ifdef CONFIG_CL_PN532_DEBUG_TX
# define tracetx errdumpbuffer
#else
# define tracetx(x...)
#endif
#ifdef CONFIG_CL_PN532_DEBUG_RX
# define tracerx errdumpbuffer
#else
# define tracerx(x...)
#endif
#define FRAME_SIZE(f) (sizeof(struct pn532_frame) + f->len + 2)
#define FRAME_POSTAMBLE(f) (f->data[f->len + 1])
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static inline void pn532_configspi(FAR struct spi_dev_s *spi);
static void pn532_lock(FAR struct spi_dev_s *spi);
static void pn532_unlock(FAR struct spi_dev_s *spi);
/* Character driver methods */
static int _open(FAR struct file *filep);
static int _close(FAR struct file *filep);
static ssize_t _read(FAR struct file *filep,
FAR char *buffer, size_t buflen);
static ssize_t _write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int _ioctl(FAR struct file *filep, int cmd, unsigned long arg);
static uint8_t pn532_checksum(uint8_t value);
static uint8_t pn532_data_checksum(FAR uint8_t *data, int datalen);
int pn532_read(FAR struct pn532_dev_s *dev, FAR uint8_t *buff, uint8_t n);
#if 0 /* TODO */
/* IRQ Handling */
static int pn532_irqhandler(FAR int irq, FAR void *context, FAR void *dev);
static inline int pn532_attachirq(FAR struct pn532_dev_s *dev, xcpt_t isr);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations g_pn532fops =
{
_open, /* open */
_close, /* close */
_read, /* read */
_write, /* write */
NULL, /* seek */
_ioctl, /* ioctl */
};
static const uint8_t pn532ack[] =
{
0x00, 0x00, 0xff, 0x00, 0xff, 0x00
};
/****************************************************************************
* Private Functions
****************************************************************************/
static void pn532_lock(FAR struct spi_dev_s *spi)
{
int ret;
SPI_LOCK(spi, true);
SPI_SETMODE(spi, SPIDEV_MODE0);
SPI_SETBITS(spi, 8);
ret = SPI_HWFEATURES(spi, HWFEAT_LSBFIRST);
if (ret < 0)
{
ctlserr("ERROR: SPI_HWFEATURES failed to set bit order: %d\n", ret);
}
SPI_SETFREQUENCY(spi, CONFIG_PN532_SPI_FREQ);
}
static void pn532_unlock(FAR struct spi_dev_s *spi)
{
SPI_LOCK(spi, false);
}
static inline void pn532_configspi(FAR struct spi_dev_s *spi)
{
int ret;
/* Configure SPI for the PN532 module. */
SPI_SETMODE(spi, SPIDEV_MODE0);
SPI_SETBITS(spi, 8);
ret = SPI_HWFEATURES(spi, HWFEAT_LSBFIRST);
if (ret < 0)
{
ctlserr("ERROR: SPI_HWFEATURES failed to set bit order: %d\n", ret);
}
SPI_SETFREQUENCY(spi, CONFIG_PN532_SPI_FREQ);
}
static inline void pn532_select(FAR struct pn532_dev_s *dev)
{
if (dev->config->select)
{
dev->config->select(dev, true);
}
else
{
SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS(0), true);
}
}
static inline void pn532_deselect(FAR struct pn532_dev_s *dev)
{
if (dev->config->select)
{
dev->config->select(dev, false);
}
else
{
SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS(0), false);
}
}
static void pn532_frame_init(FAR struct pn532_frame *frame, uint8_t cmd)
{
frame->preamble = PN532_PREAMBLE;
frame->start_code = PN532_SOF;
frame->tfi = PN532_HOSTTOPN532;
frame->data[0] = cmd;
frame->len = 2;
}
static void pn532_frame_finish(FAR struct pn532_frame *frame)
{
frame->lcs = pn532_checksum(frame->len);
frame->data[frame->len - 1] = pn532_data_checksum(&frame->tfi, frame->len);
frame->data[frame->len] = PN532_POSTAMBLE;
}
static inline uint8_t pn532_checksum(uint8_t value)
{
return ~value + 1;
}
static uint8_t pn532_data_checksum(FAR uint8_t *data, int datalen)
{
uint8_t sum = 0x00;
int i;
for (i = 0; i < datalen; i++)
{
sum += data[i];
}
return pn532_checksum(sum);
}
bool pn532_rx_frame_is_valid(FAR struct pn532_frame *f, bool check_data)
{
uint8_t chk;
if (f->start_code != PN532_SOF)
{
ctlserr("ERROR: Frame startcode 0x%X != 0x%X\n",
PN532_SOF, f->start_code);
return false;
}
if (f->tfi != PN532_PN532TOHOST)
{
return false;
}
chk = pn532_checksum(f->len);
if (chk != f->lcs)
{
ctlserr("ERROR: Frame data len checksum failed");
return false;
}
if (check_data)
{
chk = pn532_data_checksum(&f->tfi, f->len);
if (chk != f->data[f->len - 1])
{
ctlserr("ERROR: Frame data checksum failed: calc=0x%X != 0x%X",
chk, f->data[f->len - 1]);
return false;
}
}
return true;
}
static uint8_t pn532_status(FAR struct pn532_dev_s *dev)
{
int rs;
pn532_lock(dev->spi);
pn532_select(dev);
rs = SPI_SEND(dev->spi, PN532_SPI_STATREAD);
rs = SPI_SEND(dev->spi, PN532_SPI_STATREAD);
pn532_deselect(dev);
pn532_unlock(dev->spi);
return rs;
}
/****************************************************************************
* Name: pn532_wait_rx_ready
*
* Description:
* Blocks until Data frame available from chip.
*
* Input Parameters:
* dev
* timeout
*
* Returned Value:
* 0 for OK. -ETIMEDOUT if no data available
*
****************************************************************************/
static int pn532_wait_rx_ready(FAR struct pn532_dev_s *dev, int timeout)
{
int ret = OK;
#ifdef CONFIG_PN532_USE_IRQ_FLOW_CONTROL
nxsem_tickwait(dev->sem_rx, SEC2TICK(1));
#endif
/* TODO: Handle Exception bits 2, 3 */
while (pn532_status(dev) != PN532_SPI_READY)
{
if (--timeout == 0x00)
{
ctlserr("ERROR: wait RX timeout!\n");
return -ETIMEDOUT;
}
nxsig_usleep(1000);
}
dev->state = PN532_STATE_DATA_READY;
return ret;
}
/****************************************************************************
* Name: pn532_writecommand
*
* Description:
* Helper for debug/testing
*
* Input Parameters:
*
* Returned Value:
*
****************************************************************************/
#if 0
static void pn532_writecommand(FAR struct pn532_dev_s *dev, uint8_t cmd)
{
char cmd_buffer[16];
FAR struct pn532_frame *f = (FAR struct pn532_frame *)cmd_buffer;
pn532_frame_init(f, cmd);
pn532_frame_finish(f);
pn532_lock(dev->spi);
pn532_select(dev);
nxsig_usleep(10000);
SPI_SEND(dev->spi, PN532_SPI_DATAWRITE);
SPI_SNDBLOCK(dev->spi, f, FRAME_SIZE(f));
pn532_deselect(dev);
pn532_unlock(dev->spi);
tracetx("command sent", (uint8_t *) f, FRAME_SIZE(f));
}
#endif
/****************************************************************************
* Name: pn532_read
*
* Description:
* RAW Read data from chip.
* NOTE: This WON'T wait if data is available!
*
* Input Parameters:
*
* Returned Value:
*
****************************************************************************/
int pn532_read(FAR struct pn532_dev_s *dev, FAR uint8_t *buff, uint8_t n)
{
pn532_lock(dev->spi);
pn532_select(dev);
SPI_SEND(dev->spi, PN532_SPI_DATAREAD);
SPI_RECVBLOCK(dev->spi, buff, n);
pn532_deselect(dev);
pn532_unlock(dev->spi);
tracerx("read", buff, n);
return n;
}
int pn532_read_more(FAR struct pn532_dev_s *dev,
FAR uint8_t *buff, uint8_t n)
{
pn532_lock(dev->spi);
pn532_select(dev);
SPI_RECVBLOCK(dev->spi, buff, n);
pn532_deselect(dev);
pn532_unlock(dev->spi);
tracerx("read_more", buff, n);
return n;
}
/****************************************************************************
* Name: pn532_read_ack
*
* Description:
* Read Ack response from device
*
* Input Parameters:
* dev
*
* Returned Value:
* 0 = NOK, 1 = OK
*
****************************************************************************/
int pn532_read_ack(FAR struct pn532_dev_s *dev)
{
int res = 0;
uint8_t ack[6];
pn532_read(dev, (uint8_t *) &ack, 6);
if (memcmp(&ack, &pn532ack, 6) == 0x00)
{
res = 1;
}
else
{
ctlsinfo("ACK NOK");
res = 0;
}
return res;
}
/****************************************************************************
* Name: pn532_write_frame
*
* Description:
* Write frame to chip. Also waits and reads ACK frame from chip.
*
* Construct frame with
* pn532_frame_init(), pn532_frame_finish()
*
* Input Parameters:
* dev - Device instance
* f - Pointer to start frame
*
* Returned Value:
* 0 for OK, negative for error
*
****************************************************************************/
int pn532_write_frame(FAR struct pn532_dev_s *dev, FAR struct pn532_frame *f)
{
int res = OK;
pn532_lock(dev->spi);
pn532_select(dev);
nxsig_usleep(2000);
SPI_SEND(dev->spi, PN532_SPI_DATAWRITE);
SPI_SNDBLOCK(dev->spi, f, FRAME_SIZE(f));
pn532_deselect(dev);
pn532_unlock(dev->spi);
tracetx("WriteFrame", (uint8_t *) f, FRAME_SIZE(f));
/* Wait ACK frame */
res = pn532_wait_rx_ready(dev, 30);
if (res == OK)
{
if (!pn532_read_ack(dev))
{
ctlserr("ERROR: command FAILED\n");
res = -EIO;
}
}
return res;
}
int pn532_read_frame(FAR struct pn532_dev_s *dev, FAR struct pn532_frame *f,
int max_size)
{
int res = -EIO;
/* Wait for frame available */
if ((res = pn532_wait_rx_ready(dev, 100)) == OK)
{
/* Read header */
pn532_read(dev, (uint8_t *) f, sizeof(struct pn532_frame));
if (pn532_rx_frame_is_valid(f, false))
{
if (max_size < f->len)
{
return -EINVAL;
}
pn532_read_more(dev, &f->data[0], f->len);
/* TODO: optimize frame integrity check...
* pn532_data_checksum(&f.tfi, f->len);
* errdumpbuffer("RX Frame:", f, f->len+6);
*/
if (pn532_rx_frame_is_valid(f, true))
{
res = OK;
}
}
}
return res;
}
bool pn532_set_config(FAR struct pn532_dev_s *dev, uint8_t flags)
{
char cmd_buffer[2 + 7];
FAR struct pn532_frame *f = (FAR struct pn532_frame *)cmd_buffer;
pn532_frame_init(f, PN532_COMMAND_SETPARAMETERS);
f->data[1] = flags;
f->len += 1;
pn532_frame_finish(f);
uint8_t resp[9];
bool res = false;
if (pn532_write_frame(dev, f) == OK)
{
pn532_read(dev, (uint8_t *) &resp, 9);
tracerx("set config response", resp, 9);
res = true;
}
return res;
}
int pn532_sam_config(FAR struct pn532_dev_s *dev,
FAR struct pn_sam_settings_s *settings)
{
char cmd_buffer[4 + 7];
FAR struct pn532_frame *f = (FAR struct pn532_frame *) cmd_buffer;
int res;
pn532_frame_init(f, PN532_COMMAND_SAMCONFIGURATION);
f->data[1] = PN532_SAM_NORMAL_MODE;
f->data[2] = 0x14; /* Timeout LSB=50ms 0x14*50ms = 1sec */
f->data[3] = 0x01; /* P-70, IRQ enabled */
if (settings)
{
/* TODO: !!! */
}
f->len += 3;
pn532_frame_finish(f);
res = -EIO;
if (pn532_write_frame(dev, f) == OK)
{
if (pn532_read_frame(dev, f, 4) == OK)
{
tracerx("sam config response", (uint8_t *) f->data, 3);
if (f->data[0] == PN532_COMMAND_SAMCONFIGURATION + 1)
{
res = OK;
}
}
}
return res;
}
int pn532_get_fw_version(FAR struct pn532_dev_s *dev,
FAR struct pn_firmware_version *fv)
{
uint8_t cmd_buffer[4 + 8 + 1];
FAR struct pn532_frame *f = (FAR struct pn532_frame *) cmd_buffer;
struct pn_firmware_version *fw;
int res = -EIO;
pn532_frame_init(f, PN532_COMMAND_GETFIRMWAREVERSION);
pn532_frame_finish(f);
if (pn532_write_frame(dev, f) == OK)
{
if (pn532_read_frame(dev, f, 6) == OK)
{
if (f->data[0] == PN532_COMMAND_GETFIRMWAREVERSION + 1)
{
fw = (FAR struct pn_firmware_version *) &f->data[1];
ctlsinfo("FW: %d.%d on IC:0x%X (Features: 0x%X)\n",
fw->ver, fw->rev, fw->ic, fw->support);
if (fv)
{
memcpy(fv, fw, sizeof(struct pn_firmware_version));
}
res = OK;
}
}
}
return res;
}
int pn532_write_gpio(FAR struct pn532_dev_s *dev, uint8_t p3, uint8_t p7)
{
uint8_t cmd_buffer[3 + 7];
FAR struct pn532_frame *f = (FAR struct pn532_frame *) cmd_buffer;
int res = -EIO;
pn532_frame_init(f, PN532_COMMAND_WRITEGPIO);
f->data[1] = p3;
f->data[2] = p7;
f->len += 2;
pn532_frame_finish(f);
if (pn532_write_frame(dev, f))
{
pn532_read(dev, cmd_buffer, 10);
tracetx("Resp:", cmd_buffer, 10);
ctlsinfo("TFI=%x, data0=%X", f->tfi, f->data[0]);
if ((f->tfi == PN532_PN532TOHOST) &&
(f->data[0] == PN532_COMMAND_WRITEGPIO + 1))
{
res = OK;
}
}
return res;
}
uint32_t pn532_write_passive_data(FAR struct pn532_dev_s *dev,
uint8_t address, FAR uint8_t *data,
uint8_t len)
{
uint8_t cmd_buffer[8 + 7];
FAR struct pn532_frame *f = (FAR struct pn532_frame *) cmd_buffer;
uint8_t resp[20];
uint32_t res = -EIO;
pn532_frame_init(f, PN532_COMMAND_INDATAEXCHANGE);
f->data[1] = 1; /* max n cards at once */
f->data[2] = 0xa2; /* command WRITE */
f->data[3] = address; /* ADDRESS, 0 = serial */
memcpy(&f->data[4], data, len);
f->len += 7;
pn532_frame_finish(f);
if (pn532_write_frame(dev, f) == OK)
{
if (dev->state == PN532_STATE_DATA_READY)
{
if (pn532_read_frame(dev, (FAR struct pn532_frame *) resp, 15)
== OK)
{
dev->state = PN532_STATE_IDLE;
f = (FAR struct pn532_frame *) resp;
tracerx("passive target id resp:", (FAR uint8_t *)f,
f->len + 6);
if (f->data[0] == PN532_COMMAND_INDATAEXCHANGE + 1)
{
res = f->data[1];
}
}
}
}
return res;
}
uint32_t pn532_read_passive_data(FAR struct pn532_dev_s *dev,
uint8_t address, FAR uint8_t *data,
uint8_t len)
{
uint8_t cmd_buffer[4 + 7];
FAR struct pn532_frame *f = (FAR struct pn532_frame *) cmd_buffer;
uint8_t resp[30];
uint32_t res = -1;
pn532_frame_init(f, PN532_COMMAND_INDATAEXCHANGE);
f->data[1] = 1; /* max n cards at once */
f->data[2] = 0x30; /* command READ */
f->data[3] = address; /* ADDRESS, 0 = serial */
f->len += 3;
pn532_frame_finish(f);
if (pn532_write_frame(dev, f) == OK)
{
if (dev->state == PN532_STATE_DATA_READY)
{
if (pn532_read_frame(dev,
(FAR struct pn532_frame *)resp, 25) == OK)
{
dev->state = PN532_STATE_IDLE;
f = (FAR struct pn532_frame *) resp;
tracerx("passive target id resp:", (FAR uint8_t *)f,
f->len + 6);
if (f->data[0] == PN532_COMMAND_INDATAEXCHANGE + 1)
{
if (f->data[1] == 0 && data && len)
{
memcpy(data, &f->data[2], len);
}
res = f->data[1];
}
}
}
}
return res;
}
uint32_t pn532_read_passive_target_id(FAR struct pn532_dev_s *dev,
uint8_t baudrate)
{
uint8_t cmd_buffer[4 + 7];
FAR struct pn532_frame *f = (FAR struct pn532_frame *) cmd_buffer;
uint8_t resp[20];
uint32_t res = -EAGAIN;
int i;
if (dev->state == PN532_STATE_DATA_READY)
{
res = -EIO;
if (pn532_read_frame(dev, (FAR struct pn532_frame *) resp, 15) == OK)
{
FAR struct pn_poll_response *r;
dev->state = PN532_STATE_IDLE;
f = (FAR struct pn532_frame *) resp;
r = (FAR struct pn_poll_response *) &f->data[1];
tracerx("passive target id resp:", (FAR uint8_t *)f, f->len + 6);
if (f->data[0] == PN532_COMMAND_INLISTPASSIVETARGET + 1)
{
uint32_t cid = 0;
if (r->nbtg == 1)
{
FAR struct pn_target_type_a *t =
(FAR struct pn_target_type_a *)&r->target_data;
ctlsinfo("Found %d card(s)\n", r->nbtg);
/* now supports only type_a cards
* if (poll_mode == PN532_POLL_MOD_106KBPS_A)
*/
ctlsinfo("sens:0x%x sel:0x%x", t->sens_res, t->sel_res);
ctlsinfo("idlen:0x%x ", t->nfcid_len);
/* generate 32bit cid from id (could be longer)
* HACK: Using only top 4 bytes.
*/
for (i = 0; i < 4 /* t->nfcid_len */; i++)
{
cid <<= 8;
cid |= t->nfcid_data[i];
}
}
res = cid;
}
}
}
return res;
}
static int pn532_read_passive_target(FAR struct pn532_dev_s *dev,
uint8_t baudrate)
{
uint8_t cmd_buffer[4 + 7];
FAR struct pn532_frame *f = (FAR struct pn532_frame *) cmd_buffer;
pn532_frame_init(f, PN532_COMMAND_INLISTPASSIVETARGET);
f->data[1] = 1;
f->data[2] = baudrate;
f->len += 2;
pn532_frame_finish(f);
return pn532_write_frame(dev, f);
}
bool pn532_set_rf_config(struct pn532_dev_s * dev,
struct pn_rf_config_s * conf)
{
bool res = false;
uint8_t cmd_buffer[15 + 7];
FAR struct pn532_frame *f = (FAR struct pn532_frame *) cmd_buffer;
pn532_frame_init(f, PN532_COMMAND_RFCONFIGURATION);
f->data[1] = conf->cfg_item;
memcpy(&f->data[2], conf->config, conf->data_size);
f->len += conf->data_size + 1;
pn532_frame_finish(f);
if (pn532_write_frame(dev, f) == OK)
{
pn532_read(dev, (uint8_t *) f, 10);
tracerx("rf config response", (uint8_t *) f, 10);
if (pn532_rx_frame_is_valid(f, true))
{
if (f->data[0] == PN532_COMMAND_RFCONFIGURATION + 1)
{
res = true;
}
}
}
return res;
}
/****************************************************************************
* Name: pn532_attachirq
*
* Description:
* IRQ handling TODO:
*
* Input Parameters:
*
* Returned Value:
*
****************************************************************************/
#if 0
static inline int (FAR struct pn532_dev_s *dev, xcpt_t isr)
{
return dev->config->irqattach(dev, isr);
}
static int irq_handler(int irq, FAR void *context)
{
ctlsinfo("*IRQ*\n");
work_queue(HPWORK, &g_dev->irq_work, pn532_worker, dev, 0);
return OK;
}
#endif
/****************************************************************************
* Name: pn532_open
*
* Description:
* This function is called whenever the PN532 device is opened.
*
****************************************************************************/
static int _open(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct pn532_dev_s *dev;
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
dev = inode->i_private;
pn532_configspi(dev->spi);
dev->config->reset(1);
nxsig_usleep(10000);
pn532_sam_config(dev, NULL);
pn532_get_fw_version(dev, NULL);
dev->state = PN532_STATE_IDLE;
return OK;
}
/****************************************************************************
* Name: _close
*
* Description:
* This routine is called when the PN532 device is closed.
*
****************************************************************************/
static int _close(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct pn532_dev_s *dev;
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
dev = inode->i_private;
dev->config->reset(0);
dev->state = PN532_STATE_NOT_INIT;
#ifdef CONFIG_PM
if (dev->pm_level >= PM_SLEEP)
{
#if 0
priv->config->reset(0);
#endif
}
#endif
return OK;
}
/****************************************************************************
* Name: _read
*
* Description:
* This routine is called when the device is read.
*
* Returned Value:
* TAG id as string to buffer or -EIO if no TAG found
*
****************************************************************************/
static ssize_t _read(FAR struct file *filep, FAR char *buffer, size_t buflen)
{
FAR struct inode *inode;
FAR struct pn532_dev_s *dev;
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
dev = inode->i_private;
uint32_t id = pn532_read_passive_target_id(dev, PN532_MIFARE_ISO14443A);
if (id != 0xffffffff)
{
if (buffer)
{
return snprintf(buffer, buflen, "0X%X", id);
}
}
return -EIO;
}
/****************************************************************************
* Name: pn532_write
****************************************************************************/
static ssize_t _write(FAR struct file *filep, FAR const char *buffer,
size_t buflen)
{
FAR struct inode *inode;
FAR struct pn532_dev_s *dev;
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
dev = inode->i_private;
UNUSED(dev);
return -ENOSYS;
}
/****************************************************************************
* Name: pn532_ioctl
****************************************************************************/
static int _ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode;
FAR struct pn532_dev_s *dev;
int ret = OK;
inode = filep->f_inode;
DEBUGASSERT(inode->i_private);
dev = inode->i_private;
switch (cmd)
{
case PN532IOC_READ_TAG_DATA:
{
FAR struct pn_mifare_tag_data_s *tag_data =
(FAR struct pn_mifare_tag_data_s *) arg;
if (tag_data != 0)
{
/* HACK: get rid of previous command */
if (dev->state == PN532_STATE_CMD_SENT)
{
if (pn532_wait_rx_ready(dev, 1))
{
pn532_read_passive_target_id(dev, 0);
}
}
ret = pn532_read_passive_data(dev, tag_data->address,
(uint8_t *) &tag_data->data,
sizeof(tag_data->data));
dev->state = PN532_STATE_IDLE;
}
}
break;
case PN532IOC_WRITE_TAG_DATA:
{
FAR struct pn_mifare_tag_data_s *tag_data =
(FAR struct pn_mifare_tag_data_s *) arg;
if (tag_data != 0)
{
/* HACK: get rid of previous command */
if (dev->state == PN532_STATE_CMD_SENT)
{
if (pn532_wait_rx_ready(dev, 1))
{
pn532_read_passive_target_id(dev, 0);
}
}
ret = pn532_write_passive_data(dev, tag_data->address,
(FAR uint8_t *) &tag_data->data,
sizeof(tag_data->data));
dev->state = PN532_STATE_IDLE;
}
}
break;
case PN532IOC_SET_SAM_CONF:
pn532_sam_config(dev, (FAR struct pn_sam_settings_s *) arg);
break;
case PN532IOC_READ_PASSIVE:
if (dev->state == PN532_STATE_CMD_SENT)
{
FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg);
*ptr = pn532_read_passive_target_id(dev, 0);
}
else
{
FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg);
*ptr = -1;
}
break;
case PN532IOC_SET_RF_CONF:
pn532_set_rf_config(dev, (FAR struct pn_rf_config_s *) arg);
break;
case PN532IOC_SEND_CMD_READ_PASSIVE:
ret = pn532_read_passive_target(dev, 0);
if (ret == 0)
{
dev->state = PN532_STATE_CMD_SENT;
}
else
{
dev->state = PN532_STATE_IDLE;
}
break;
case PN532IOC_GET_DATA_READY:
if (pn532_wait_rx_ready(dev, 1))
{
ret = 0;
}
else
{
ret = 1;
}
break;
case PN532IOC_GET_TAG_ID:
{
FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg);
*ptr = pn532_read_passive_target_id(dev, 0);
}
break;
case PN532IOC_GET_STATE:
ret = dev->state;
break;
default:
ctlserr("ERROR: Unrecognized cmd: %d\n", cmd);
ret = -ENOTTY;
break;
}
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: pn532_register
*
* Description:
* Register the PN532 character device as 'devpath'
*
* Input Parameters:
* devpath - The full path to the driver to register.
* E.g., "/dev/nfc0"
* spi - An instance of the SPI interface to use to communicate with
* PN532.
* config - chip config
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
****************************************************************************/
int pn532_register(FAR const char *devpath, FAR struct spi_dev_s *spi,
FAR struct pn532_config_s *config)
{
FAR struct pn532_dev_s *dev;
int ret;
/* Initialize the PN532 device structure */
dev = kmm_malloc(sizeof(struct pn532_dev_s));
if (!dev)
{
ctlserr("ERROR: Failed to allocate instance\n");
return -ENOMEM;
}
dev->spi = spi;
dev->config = config;
#if defined CONFIG_PM
dev->pm_level = PM_IDLE;
#endif
/* pn532_attachirq(dev, pn532_irqhandler); */
/* Register the character driver */
ret = register_driver(devpath, &g_pn532fops, 0666, dev);
if (ret < 0)
{
ctlserr("ERROR: Failed to register driver: %d\n", ret);
kmm_free(dev);
}
return ret;
}
Reference in New Issue View Git Blame Copy Permalink