nuttx

History

Xiang Xiao 8f8ee25a9c boards: Move -g from Make.defs to Toolchain.defs Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>		2022-04-25 16:23:03 +03:00
..
configs/nsh	sched: Disable pthread by default when DEFAULT_SMALL is enabled	2022-02-07 12:04:03 +08:00
include	boards: risc-v: Author Masayuki Ishikawa: Update license to Apache	2021-03-12 16:15:44 +08:00
scripts	boards: Move -g from Make.defs to Toolchain.defs	2022-04-25 16:23:03 +03:00
src	arch/risc-v: Remove FAR from chip and board folder	2022-04-19 00:22:45 +03:00
Kconfig
README-qemu.txt	Fix git clone repository	2021-01-20 22:35:59 +09:00
README.txt	Fix git clone repository	2021-01-20 22:35:59 +09:00

README.txt

1. Download and install toolchain

  $ curl https://static.dev.sifive.com/dev-tools/riscv64-unknown-elf-gcc-8.3.0-2019.08.0-x86_64-linux-ubuntu14.tar.gz

2. Download and install J-Link Software Documentation Pack

  https://www.segger.com/downloads/jlink/

  $ sudo apt install JLink_Linux_V656b_x86_64.deb

3. Configure and build NuttX

  $ mkdir ./nuttx; cd ./nuttx
  $ git clone https://github.com/apache/incubator-nuttx.git
  $ git clone https://github.com/apache/incubator-nuttx-apps.git
  $ cd nuttx
  $ make distclean
  $ ./tools/configure.sh hifive1-revb:nsh
  $ make V=1

4. Flash the nuttx with J-Link and run

  $ picocom -b 115200 /dev/ttyACM0

  $ /opt/SEGGER/JLink_V656b/JLinkGDBServer -device FE310

  $ riscv64-unknown-elf-gdb ./nuttx
  (gdb) target extended-remote:2331
  (gdb) load nuttx
  (gdb) c

5. TODO

  Support GPIO/SPI/I2C/RTC/WDT/PWM
  Support RISC-V User mode