411 lines
16 KiB
C
411 lines
16 KiB
C
/************************************************************************************
|
|
* configs/fire-stm32v2/include/board.h
|
|
* include/arch/board/board.h
|
|
*
|
|
* Copyright (C) 2012, 2016 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIGS_FIRE_STM32V2_INCLUDE_BOARD_H
|
|
#define __CONFIGS_FIRE_STM32V2_INCLUDE_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
#include "stm32_rcc.h"
|
|
#include "stm32_sdio.h"
|
|
#include "stm32.h"
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
|
|
/* HSI - 8 MHz RC factory-trimmed
|
|
* LSI - 40 KHz RC (30-60KHz, uncalibrated)
|
|
* HSE - On-board crystal frequency is 8MHz
|
|
* LSE - 32.768 kHz crytal
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 8000000ul
|
|
|
|
#define STM32_HSI_FREQUENCY 8000000ul
|
|
#define STM32_LSI_FREQUENCY 40000
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 32768
|
|
|
|
/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is 8MHz (XTAL) x 9 = 72MHz */
|
|
|
|
#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC
|
|
#define STM32_CFGR_PLLXTPRE 0
|
|
#define STM32_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx9
|
|
#define STM32_PLL_FREQUENCY (9*STM32_BOARD_XTAL)
|
|
|
|
/* Use the PLL and set the SYSCLK source to be the PLL */
|
|
|
|
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
|
|
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
|
|
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
|
|
#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
|
|
|
/* APB2 clock (PCLK2) is HCLK (72MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
|
|
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 2-7, 12-14 */
|
|
|
|
/* APB2 timers 1 and 8 will receive PCLK2. */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* APB1 timers 2-7 will be twice PCLK1 */
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* USB divider -- Divide PLL clock by 1.5 */
|
|
|
|
#define STM32_CFGR_USBPRE 0
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
|
* otherwise frequency is 2xAPBx.
|
|
* Note: TIM1,8 are on APB2, others on APB1 */
|
|
|
|
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM2_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM3_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM4_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM5_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM6_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM7_FREQUENCY STM32_HCLK_FREQUENCY
|
|
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
|
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
|
* to service FIFOs in interrupt driven mode. These values have not been
|
|
* tuned!!!
|
|
*
|
|
* HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
|
|
*/
|
|
|
|
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
|
|
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
|
|
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
|
*/
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#else
|
|
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#endif
|
|
|
|
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
|
|
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
|
*/
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#else
|
|
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#endif
|
|
|
|
/* LED definitions ******************************************************************/
|
|
/* The M3 Wildfire has 3 LEDs labeled LED1, LED2 and LED3. These LEDs are not
|
|
* used by the NuttX port unless CONFIG_ARCH_LEDS is defined. In that case, the
|
|
* usage by the board port is defined in include/board.h and src/up_autoleds.c.
|
|
* The LEDs are used to encode OS-related events as follows:
|
|
*/
|
|
/* LED1 LED2 LED3 */
|
|
#define LED_STARTED 0 /* OFF OFF OFF */
|
|
#define LED_HEAPALLOCATE 1 /* ON OFF OFF */
|
|
#define LED_IRQSENABLED 2 /* OFF ON OFF */
|
|
#define LED_STACKCREATED 3 /* OFF OFF OFF */
|
|
|
|
#define LED_INIRQ 4 /* NC NC ON (momentary) */
|
|
#define LED_SIGNAL 4 /* NC NC ON (momentary) */
|
|
#define LED_ASSERTION 4 /* NC NC ON (momentary) */
|
|
#define LED_PANIC 4 /* NC NC ON (2Hz flashing) */
|
|
#undef LED_IDLE /* Sleep mode indication not supported */
|
|
|
|
/* The M3 Wildfire supports several two user buttons: KEY1 and KEY2 */
|
|
|
|
#define BUTTON_KEY1 0
|
|
#define BUTTON_KEY2 1
|
|
#define NUM_BUTTONS 2
|
|
|
|
#define BUTTON_KEY1_BIT (1 << BUTTON_KEY1)
|
|
#define BUTTON_KEY2_BIT (1 << BUTTON_KEY2)
|
|
|
|
/* Pin Remapping ********************************************************************/
|
|
/* USB 2.0
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 70 PA11 PA11-USBDM USB2.0
|
|
* 71 PA12 PA12-USBDP USB2.0
|
|
* 2 PE3 PE3-USB-M USB2.0
|
|
*/
|
|
|
|
/* 2.4" TFT + Touchscreen
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 30 PA5 PA5-SPI1-SCK 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 31 PA6 PA6-SPI1-MISO 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 32 PA7 PA7-SPI1-MOSI 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 92 PB6 PB6-I2C1-SCL 2.4" TFT + Touchscreen, AT24C02
|
|
* 93 PB7 PB7-I2C1-SDA 2.4" TFT + Touchscreen, AT24C02
|
|
* 81 PD0 PD0-FSMC_D2 2.4" TFT + Touchscreen
|
|
* 82 PD1 PD1-FSMC_D3 2.4" TFT + Touchscreen
|
|
* 85 PD4 PD4-FSMC_NOE 2.4" TFT + Touchscreen
|
|
* 86 PD5 PD5-FSMC_NWE 2.4" TFT + Touchscreen
|
|
* 88 PD7 PD7-FSMC_NE1 2.4" TFT + Touchscreen
|
|
* 55 PD8 PD8-FSMC_D13 2.4" TFT + Touchscreen
|
|
* 56 PD9 PD9-FSMC_D14 2.4" TFT + Touchscreen
|
|
* 57 PD10 PD10-FSMC_D15 2.4" TFT + Touchscreen
|
|
* 58 PD11 PD11-FSMC_A16 2.4" TFT + Touchscreen
|
|
* 60 PD13 PD13-LCD/LIGHT 2.4" TFT + Touchscreen
|
|
* 61 PD14 PD14-FSMC_D0 2.4" TFT + Touchscreen
|
|
* 62 PD15 PD15-FSMC_D1 2.4" TFT + Touchscreen
|
|
* 98 PE1 PE1-FSMC_NBL1 2.4" TFT + Touchscreen, 10Mbit EN28J60 Reset
|
|
* 38 PE7 PE7-FSMC_D4 2.4" TFT + Touchscreen
|
|
* 39 PE8 PE8-FSMC_D5 2.4" TFT + Touchscreen
|
|
* 40 PE9 PE9-FSMC_D6 2.4" TFT + Touchscreen
|
|
* 41 PE10 PE10-FSMC_D7 2.4" TFT + Touchscreen
|
|
* 42 PE11 PE11-FSMC_D8 2.4" TFT + Touchscreen
|
|
* 43 PE12 PE12-FSMC_D9 2.4" TFT + Touchscreen
|
|
* 44 PE13 PE13-FSMC_D10 2.4" TFT + Touchscreen
|
|
* 45 PE14 PE14-FSMC_D11 2.4" TFT + Touchscreen
|
|
* 46 PE15 PE15-FSMC_D12 2.4" TFT + Touchscreen
|
|
*/
|
|
|
|
#if defined(CONFIG_STM32_SPI1) && defined(CONFIG_STM32_SPI1_REMAP)
|
|
# error "SPI1 requires CONFIG_STM32_SPI1_REMAP=n"
|
|
#endif
|
|
|
|
#if defined(CONFIG_STM32_I2C1) && defined(CONFIG_STM32_I2C1_REMAP)
|
|
# error "SPI1 requires CONFIG_STM32_I2C1_REMAP=n"
|
|
#endif
|
|
|
|
/* AT24C02
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 92 PB6 PB6-I2C1-SCL 2.4" TFT + Touchscreen, AT24C02
|
|
* 93 PB7 PB7-I2C1-SDA 2.4" TFT + Touchscreen, AT24C02
|
|
*/
|
|
|
|
#if defined(CONFIG_STM32_I2C1) && defined(CONFIG_STM32_I2C1_REMAP)
|
|
# error "SPI1 requires CONFIG_STM32_I2C1_REMAP=n"
|
|
#endif
|
|
|
|
/* Potentiometer/ADC
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 16 PC1 PC1/ADC123-IN11 Potentiometer (R16)
|
|
* 24 PA1 PC1/ADC123-IN1
|
|
*/
|
|
|
|
/* USARTs
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 68 PA9 PA9-US1-TX MAX3232, DB9 D8, Requires !CONFIG_STM32_USART1_REMAP
|
|
* 69 PA10 PA10-US1-RX MAX3232, DB9 D8, Requires !CONFIG_STM32_USART1_REMAP
|
|
* 25 PA2 PA2-US2-TX MAX3232, DB9 D7, Requires !CONFIG_STM32_USART2_REMAP
|
|
* 26 PA3 PA3-US2-RX MAX3232, DB9 D7, Requires !CONFIG_STM32_USART2_REMAP
|
|
*/
|
|
|
|
#if defined(CONFIG_STM32_USART1) && defined(CONFIG_STM32_USART1_REMAP)
|
|
# errror "USART1 requires CONFIG_STM32_USART1_REMAP=n"
|
|
#endif
|
|
|
|
#if defined(CONFIG_STM32_USART2) && defined(CONFIG_STM32_USART2_REMAP)
|
|
# errror "USART2 requires CONFIG_STM32_USART2_REMAP=n"
|
|
#endif
|
|
|
|
/* 2MBit SPI FLASH
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 29 PA4 PA4-SPI1-NSS 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 30 PA5 PA5-SPI1-SCK 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 31 PA6 PA6-SPI1-MISO 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 32 PA7 PA7-SPI1-MOSI 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
|
|
*/
|
|
|
|
#if defined(CONFIG_STM32_SPI1) && defined(CONFIG_STM32_SPI1_REMAP)
|
|
# error "SPI1 requires CONFIG_STM32_SPI1_REMAP=n"
|
|
#endif
|
|
|
|
/* ENC28J60
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 29 PA4 PA4-SPI1-NSS 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 30 PA5 PA5-SPI1-SCK 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 31 PA6 PA6-SPI1-MISO 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 32 PA7 PA7-SPI1-MOSI 2.4" TFT + Touchscreen, 10Mbit ENC28J60, SPI 2M FLASH
|
|
* 98 PE1 PE1-FSMC_NBL1 2.4" TFT + Touchscreen, 10Mbit EN28J60 Reset
|
|
* 4 PE5 (no name) 10Mbps ENC28J60 Interrupt
|
|
*/
|
|
|
|
#if defined(CONFIG_STM32_SPI1) && defined(CONFIG_STM32_SPI1_REMAP)
|
|
# error "SPI1 requires CONFIG_STM32_SPI1_REMAP=n"
|
|
#endif
|
|
|
|
/* MP3
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 48 PB11 PB11-MP3-RST MP3
|
|
* 51 PB12 PB12-SPI2-NSS MP3
|
|
* 52 PB13 PB13-SPI2-SCK MP3
|
|
* 53 PB14 PB14-SPI2-MISO MP3
|
|
* 54 PB15 PB15-SPI2-MOSI MP3
|
|
* 63 PC6 PC6-MP3-XDCS MP3
|
|
* 64 PC7 PC7-MP3-DREQ MP3
|
|
*/
|
|
|
|
/* SD Card
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 65 PC8 PC8-SDIO-D0 SD card, pulled high
|
|
* 66 PC9 PC9-SDIO-D1 SD card, pulled high
|
|
* 78 PC10 PC10-SDIO-D2 SD card, pulled high
|
|
* 79 PC11 PC10-SDIO-D3 SD card, pulled high
|
|
* 80 PC12 PC12-SDIO-CLK SD card
|
|
* 83 PD2 PD2-SDIO-CMD SD card, pulled high
|
|
*/
|
|
|
|
/* CAN
|
|
*
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
* PIN NAME SIGNAL NOTES
|
|
* --- ------ -------------- -------------------------------------------------------------------
|
|
*
|
|
* 95 PB8 PB8-CAN-RX CAN tranceiver, Header 2H
|
|
* 96 PB9 PB9-CAN-TX CAN tranceiver, Header 2H
|
|
*/
|
|
|
|
#if defined(CONFIG_STM32_CAN1) && !defined(CONFIG_STM32_CAN1_REMAP1)
|
|
# error "SPI1 requires CONFIG_STM32_CAN1_REMAP1=y"
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C" {
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Public Function Prototypes
|
|
************************************************************************************/
|
|
/************************************************************************************
|
|
* Name: stm32_boardinitialize
|
|
*
|
|
* Description:
|
|
* All STM32 architectures must provide the following entry point. This entry point
|
|
* is called early in the intitialization -- after all memory has been configured
|
|
* and mapped but before any devices have been initialized.
|
|
*
|
|
************************************************************************************/
|
|
|
|
void stm32_boardinitialize(void);
|
|
|
|
/************************************************************************************
|
|
* Name: fire_lcdclear
|
|
*
|
|
* Description:
|
|
* This is a non-standard LCD interface just for the M3 Wildfire board. Because
|
|
* of the various rotations, clearing the display in the normal way by writing a
|
|
* sequences of runs that covers the entire display can be very slow. Here the
|
|
* dispaly is cleared by simply setting all GRAM memory to the specified color.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifdef CONFIG_STM32_FSMC
|
|
void fire_lcdclear(uint16_t color);
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __CONFIGS_FIRE_STM32V2_INCLUDE_BOARD_H */
|