nuttx/configs/sure-pic32mx/include/board.h
patacongo d978173922 PIC32 start kit port builds successfully
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4037 42af7a65-404d-4744-a932-0658087f49c3
2011-10-10 22:40:59 +00:00

134 lines
5.6 KiB
C

/****************************************************************************
* configs/sure-pic32mx/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __CONFIGS_SURE_PIC32MX_INCLUDE_BOARD_H
#define __CONFIGS_SURE_PIC32MX_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Clocking *****************************************************************/
/* Crystal frequencies */
#define BOARD_POSC_FREQ 20000000 /* Primary OSC XTAL frequency (20MHz) */
#define BOARD_SOSC_FREQ 32768 /* Secondary OSC XTAL frequency (32.768KHz) */
/* PLL configuration and resulting CPU clock.
* CPU_CLOCK = ((POSC_FREQ / IDIV) * MULT) / ODIV
*/
#define BOARD_PLL_IDIV 5 /* PLL input divider */
#define BOARD_PLL_MULT 15 /* PLL multiplier */
#define BOARD_PLL_ODIV 1 /* PLL output divider */
#define BOARD_CPU_CLOCK 60000000 /* CPU clock (60MHz = (20MHz / 5) * 15 / 1) */
/* USB PLL configuration.
* USB_CLOCK = ((POSC_XTAL / IDIV) * 24) / 2
*/
#define BOARD_UPLL_IDIV 5 /* USB PLL divider */
#define BOARD_USB_CLOCK 48000000 /* USB clock ((20MHz / 5) * 24) / 2 */
/* Peripheral clock is *not* divided down from CPU clock.
* PBCLOCK = CPU_CLOCK / PBDIV
*/
#define BOARD_PBDIV 1 /* Peripheral clock divisor (PBDIV) */
#define BOARD_PBCLOCK 60000000 /* Peripheral clock (PBCLK = 60MHz/1) */
/* Watchdog pre-scaler (re-visit) */
#define BOARD_WD_ENABLE 0 /* Watchdog is disabled */
#define BOARD_WD_PRESCALER 8 /* Watchdog pre-scaler */
/* LED definitions **********************************************************/
/* The Sure PIC32MX board has five LEDs. One (D4, lablel "Power") is not
* controllable by software. Four are controllable by software:
*
* D7 "USB" Yellow RD7 Low illuminates
* D8 "SD" Yellow RD6 Low illuminates
* D9 "Flash" Yellow RF0 Low illuminates
* D10 "Error" Red RF1 Low illuminates
*/
/* ON OFF */
/* USB SD FLASH ERROR USB SD FLASH ERROR */
#define LED_STARTED 0 /* OFF OFF OFF OFF --- --- --- --- */
#define LED_HEAPALLOCATE 1 /* ON OFF N/C N/C --- --- --- --- */
#define LED_IRQSENABLED 2 /* OFF ON N/C N/C --- --- --- --- */
#define LED_STACKCREATED 3 /* ON ON N/C N/C --- --- --- --- */
#define LED_INIRQ 4 /* N/C N/C ON N/C N/C N/C OFF N/C */
#define LED_SIGNAL 4 /* N/C N/C ON N/C N/C N/C OFF N/C */
#define LED_ASSERTION 4 /* N/C N/C ON N/C N/C N/C OFF N/C */
#define LED_PANIC 5 /* N/C N/C N/C ON N/C N/C N/C OFF */
/****************************************************************************
* Public Types
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Inline Functions
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_SURE_PIC32MX_INCLUDE_BOARD_H */