Gregory Nutt db0641556e boards/arm/s32k1xx/s32k118evb: Implement board support for LEDs and buttons. This is taken from the Freedom-K66f with has the same LED and button configuation as the S32K116EVB and uses the same GPIO IP. ... boards/arm/s32k1xx/s32k118evb/include/board.h: Add LPUART0 pin disambiguation. arch/arm/src/s32k1xx/hardware: Add pin mux definitions for S32K116, 118, 142, 144, 146, and 148. arch/arm/src/s32k1xx/s32k1xx_pin.c and .h: Add support for PIDR register that disables a gneral purpose pin from acting as an input. arch/arm/src/s32k1xx/s32k1xx_pin.c and .h: The device does not support slew rate controls or open drain (on all the pins). Only pins that are configured for a protocol that requires open-drain (e.g;, LPI2C, LPUART single-wire) will work in open-drain mode.		2019-08-18 12:02:54 -06:00
..
include	Squashed commit of the following:	2019-08-16 16:18:15 -06:00
src	boards/arm/s32k1xx/s32k118evb: Implement board support for LEDs and buttons. This is taken from the Freedom-K66f with has the same LED and button configuation as the S32K116EVB and uses the same GPIO IP.	2019-08-18 12:02:54 -06:00
Kconfig	This commit brings the initial files for a port to the NXP S32K1xx family. This is very much a work in progress and is little more that a partial configuration/build environment and some S32K1xx register definition header files	2019-08-12 12:12:58 -06:00