36df84c843
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
144 lines
7.7 KiB
C
144 lines
7.7 KiB
C
/************************************************************************************
|
|
* arch/arm/src/str71x/str71x_rccu.h
|
|
*
|
|
* Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __ARCH_ARM_SRC_STR71X_STR71X_RCCU_H
|
|
#define __ARCH_ARM_SRC_STR71X_STR71X_RCCU_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include "str71x_map.h"
|
|
|
|
/************************************************************************************
|
|
* Pre-procesor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Reset and Clock Control Unit (RCCU) register offsets *****************************/
|
|
|
|
/* All registers are 32-bits wide, but with the top 16 bits "reserved" */
|
|
|
|
#define STR71X_RCCU_CCR_OFFSET (0x0000) /* 32-bits wide */
|
|
#define STR71X_RCCU_CFR_OFFSET (0x0008) /* 32-bits wide */
|
|
#define STR71X_RCCU_PLL1CR_OFFSET (0x0018) /* 32-bits wide */
|
|
#define STR71X_RCCU_PER_OFFSET (0x001c) /* 32-bits wide */
|
|
#define STR71X_RCCU_SMR_OFFSET (0x0020) /* 32-bits wide */
|
|
|
|
/* Reset and Clock Control Unit (RCCU) register addresses ***************************/
|
|
|
|
#define STR71X_RCCU_CCR (STR71X_RCCU_BASE + STR71X_RCCU_CCR_OFFSET)
|
|
#define STR71X_RCCU_CFR (STR71X_RCCU_BASE + STR71X_RCCU_CFR_OFFSET)
|
|
#define STR71X_RCCU_PLL1CR (STR71X_RCCU_BASE + STR71X_RCCU_PLL1CR_OFFSET)
|
|
#define STR71X_RCCU_PER (STR71X_RCCU_BASE + STR71X_RCCU_PER_OFFSET)
|
|
#define STR71X_RCCU_SMR (STR71X_RCCU_BASE + STR71X_RCCU_SMR_OFFSET)
|
|
|
|
/* Register bit settings ************************************************************/
|
|
|
|
/* RCCU CCR register bit definitions */
|
|
|
|
#define STR71X_RCCUCCR_LPOWFI (0x00000001) /* Bit 0: Low power mode in wait-for-interrupt mode */
|
|
#define STR71X_RCCUCCR_WFICLKSEL (0x00000002) /* Bit 1: WFI clock select */
|
|
#define STR71X_RCCUCCR_CKAFSEL (0x00000004) /* Bit 2: Alternate function clock select */
|
|
#define STR71X_RCCUCCR_SRESEN (0x00000008) /* Bit 3: Software reset enable */
|
|
#define STR71X_RCCUCCR_ENCLOCK (0x00000080) /* Bit 7: Lock interrupt enable */
|
|
#define STR71X_RCCUCCR_ENCKAF (0x00000100) /* Bit 8: CKAF interrupt enable */
|
|
#define STR71X_RCCUCCR_ENCK216 (0x00000200) /* Bit 9: CK2_16 interrupt enable */
|
|
#define STR71X_RCCUCCR_ENSTOP (0x00000400) /* Bit 10: Stop interrupt enable */
|
|
#define STR71X_RCCUCCR_ENHALT (0x00000800) /* Bit 11: Enable halt */
|
|
|
|
/* RCCU CFR register bit definitions */
|
|
|
|
#define STR71X_RCCUCFR_CSUCKSEL (0x00000001) /* Bit 0: CSU clock select */
|
|
#define STR71X_RCCUCFR_LOCK (0x00000002) /* Bit 1: PLL locked-in */
|
|
#define STR71X_RCCUCFR_CKAFST (0x00000004) /* Bit 2: CK_AF status */
|
|
#define STR71X_RCCUCFR_CK216 (0x00000008) /* Bit 3: CLK2/16 selection */
|
|
#define STR71X_RCCUCFR_CKSTOPEN (0x00000010) /* Bit 4: Clock stop enable */
|
|
#define STR71X_RCCUCFR_SOFTRES (0x00000020) /* Bit 5: Software reset */
|
|
#define STR71X_RCCUCFR_WDGRES (0x00000040) /* Bit 6: Watchdog reset */
|
|
#define STR71X_RCCUCFR_RTCALARM (0x00000080) /* Bit 7: RTC alarm reset */
|
|
#define STR71X_RCCUCFR_LVDRES (0x00000200) /* Bit 9: Voltage regulator low voltage detector reset */
|
|
#define STR71X_RCCUCFR_WKPRES (0x00000400) /* Bit 10: External wakeup */
|
|
#define STR71X_RCCUCFR_LOCKI (0x00000800) /* Bit 11: Lock interrupt pending */
|
|
#define STR71X_RCCUCFR_CKAFI (0x00001000) /* Bit 12: CK_AF switching interrupt pending */
|
|
#define STR71X_RCCUCFR_CK216I (0x00002000) /* Bit 13: CK2_16 switching interrupt pending */
|
|
#define STR71X_RCCUCFR_STOPI (0x00004000) /* Bit 14: Stop interrupt pending */
|
|
#define STR71X_RCCUCFR_DIV2 (0x00008000) /* Bit 15: OSCIN divided by 2 */
|
|
|
|
/* RCCU PPL1CR register bit definitions */
|
|
|
|
#define STR71X_RCCUPLL1CR_DXMASK (0x00000003) /* Bit 0-2: PLL1 clock divisor */
|
|
#define STR71X_RCCUPLL1CR_DIV1 (0x00000000) /* PLLCK / 1 */
|
|
#define STR71X_RCCUPLL1CR_DIV2 (0x00000001) /* PLLCK / 2 */
|
|
#define STR71X_RCCUPLL1CR_DIV3 (0x00000002) /* PLLCK / 3 */
|
|
#define STR71X_RCCUPLL1CR_DIV4 (0x00000003) /* PLLCK / 4 */
|
|
#define STR71X_RCCUPLL1CR_DIV5 (0x00000004) /* PLLCK / 5 */
|
|
#define STR71X_RCCUPLL1CR_DIV6 (0x00000005) /* PLLCK / 6 */
|
|
#define STR71X_RCCUPLL1CR_DIV7 (0x00000006) /* PLLCK / 7 */
|
|
#define STR71X_RCCUPLL1CR_CLK2 (0x00000007) /* FREEN==0: CLK2 */
|
|
#define STR71X_RCCUPLL1CR_FREERM (0x00000007) /* FREEN==1: PLL1 in free running mode */
|
|
#define STR71X_RCCUPLL1CR_MXMASK (0x00000030) /* Bit 4-5: PLL1 clock multiplier */
|
|
#define STR71X_RCCUPLL1CR_MUL20 (0x00000000) /* CLK2 * 20 */
|
|
#define STR71X_RCCUPLL1CR_MUL12 (0x00000010) /* CLK2 * 12 */
|
|
#define STR71X_RCCUPLL1CR_MUL24 (0x00000020) /* CLK2 * 24 */
|
|
#define STR71X_RCCUPLL1CR_MUL16 (0x00000030) /* CLK2 * 16 */
|
|
#define STR71X_RCCUPLL1CR_FREFRANGE (0x00000040) /* Bit 6: Reference frequency range select */
|
|
#define STR71X_RCCUPLL1CR_FREEN (0x00000080) /* Bit 7: PKL free running mode */
|
|
|
|
/* RCCU PER register bit definitions */
|
|
|
|
#define STR71X_RCCUPER_EMI (0x00000004) /* Bit 2: EMI */
|
|
#define STR71X_RCCUPER_USBKERNEL (0x00000010) /* Bit 4: USB Kernel */
|
|
|
|
/* RCCU SMR register bit definitions */
|
|
|
|
#define STR71X_RCCUSMR_WFI (0x00000001) /* Bit 0: Wait for interrupt */
|
|
#define STR71X_RCCUSMR_HALT (0x00000000) /* Bit 1: Halt */
|
|
|
|
/************************************************************************************
|
|
* Public Types
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
/************************************************************************************
|
|
* Public Functions
|
|
************************************************************************************/
|
|
|
|
#endif /* __ARCH_ARM_SRC_STR71X_STR71X_RCCU_H */
|