Gregory Nutt dc16ffe11a Fix a typo in an I2C header file. From Jahu Niskanen		2014-11-11 07:12:16 -06:00
..
a1x	Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS	2014-10-27 11:31:16 -06:00
arm	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
armv6-m	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
armv7-a	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
armv7-m	Add optional timestamp to syslog output. From pn_bouteville@yahoo.fr	2014-11-01 09:17:34 -06:00
c5471	There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.	2014-09-01 15:39:34 -06:00
calypso	There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.	2014-09-01 15:39:34 -06:00
common	SAM4: Fix a usbnsh build problem that has crept into all serial drivers	2014-10-28 15:44:47 -06:00
dm320	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
efm32	EFM32: Reduce writes to the CTRL register	2014-11-09 09:43:43 -06:00
imx	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
kinetis	There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.	2014-09-01 15:39:34 -06:00
kl	Trivial, cosmetic typos in comments	2014-10-20 08:12:07 -06:00
lpc17xx	Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS	2014-10-27 11:31:16 -06:00
lpc31xx	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
lpc43xx	Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS	2014-10-27 11:31:16 -06:00
lpc214x	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
lpc2378	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
nuc1xx	Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS	2014-10-27 11:31:16 -06:00
sam34	Fix typo is SAM4E pinmap file	2014-11-03 11:59:53 -06:00
sama5	Dangle whitespace removal	2014-10-25 10:35:29 -06:00
samd	There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.	2014-09-01 15:39:34 -06:00
stm32	Fix a typo in an I2C header file. From Jahu Niskanen	2014-11-11 07:12:16 -06:00
str71x	Update everything under nuttx/arch to use the corrected syslog interfaces	2014-10-08 12:48:47 -06:00
tiva	There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.	2014-09-01 15:39:34 -06:00
.gitignore	.dSYM only needs to be in the same .gitignore files as .exe	2013-05-30 15:02:04 -06:00
Makefile	The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object	2014-09-04 13:31:34 -06:00