477 lines
17 KiB
C
477 lines
17 KiB
C
/************************************************************************************
|
|
* configs/stm32f769i-disco/include/board.h
|
|
*
|
|
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIG_STM32F769I_DISCO_INCLUDE_BOARD_H
|
|
#define __CONFIG_STM32F769I_DISCO_INCLUDE_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
#endif
|
|
|
|
#include "stm32_rcc.h"
|
|
#if defined(CONFIG_STM32F7_SDMMC1) || defined(CONFIG_STM32F7_SDMMC2)
|
|
# include "stm32_sdmmc.h"
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
/* The STM32F7 Discovery board provides the following clock sources:
|
|
*
|
|
* X2: 25 MHz oscillator for STM32F769NIH6 microcontroller and Ethernet PHY.
|
|
* X1: 32.768 KHz crystal for STM32F769NIH6 embedded RTC
|
|
*
|
|
* So we have these clock source available within the STM32
|
|
*
|
|
* HSI: 16 MHz RC factory-trimmed
|
|
* LSI: 32 KHz RC
|
|
* HSE: On-board crystal frequency is 25MHz
|
|
* LSE: 32.768 kHz
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 25000000ul
|
|
|
|
#define STM32_HSI_FREQUENCY 16000000ul
|
|
#define STM32_LSI_FREQUENCY 32000
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 32768
|
|
|
|
/* Main PLL Configuration.
|
|
*
|
|
* PLL source is HSE = 25,000,000
|
|
*
|
|
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
|
* Subject to:
|
|
*
|
|
* 2 <= PLLM <= 63
|
|
* 192 <= PLLN <= 432
|
|
* 192 MHz <= PLL_VCO <= 432MHz
|
|
*
|
|
* SYSCLK = PLL_VCO / PLLP
|
|
* Subject to
|
|
*
|
|
* PLLP = {2, 4, 6, 8}
|
|
* SYSCLK <= 216 MHz
|
|
*
|
|
* USB OTG FS, SDMMC and RNG Clock = PLL_VCO / PLLQ
|
|
* Subject to
|
|
* The USB OTG FS requires a 48 MHz clock to work correctly. The SDMMC
|
|
* and the random number generator need a frequency lower than or equal
|
|
* to 48 MHz to work correctly.
|
|
*
|
|
* 2 <= PLLQ <= 15
|
|
*/
|
|
|
|
#if defined(CONFIG_STM32F7_OTGFS)
|
|
/* USB OTG FS clock (= SDMMCCLK = RNGCLK) must be 48 MHz
|
|
*
|
|
* PLL_VCO = (25,000,000 / 25) * 384 = 384 MHz
|
|
* SYSCLK = 384 MHz / 2 = 192 MHz
|
|
* USB OTG FS, SDMMC and RNG Clock = 384 MHz / 8 = 48MHz
|
|
* DSI CLK = PLL_VCO / PLLR = 384 / 7 = 54,86 MHz
|
|
*/
|
|
|
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(25)
|
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(384)
|
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(8)
|
|
#define STM32_PLLCFG_PLLR RCC_PLLCFG_PLLR(7)
|
|
|
|
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 25) * 384)
|
|
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
|
|
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 8)
|
|
|
|
#elif defined(CONFIG_STM32F7_SDMMC1) || defined(CONFIG_STM32F7_SDMMC2) || defined(CONFIG_STM32F7_RNG)
|
|
/* SDMMCCLK (= USB OTG FS clock = RNGCLK) should be <= 48MHz
|
|
*
|
|
* PLL_VCO = (25,000,000 / 25) * 432 = 432 MHz
|
|
* SYSCLK = 432 MHz / 2 = 216 MHz
|
|
* USB OTG FS, SDMMC and RNG Clock = 432 MHz / 10 = 43.2 MHz
|
|
* DSI CLK = PLL_VCO / PLLR = 432 / 8 = 54 MHz
|
|
*/
|
|
|
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(25)
|
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(432)
|
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(10)
|
|
#define STM32_PLLCFG_PLLR RCC_PLLCFG_PLLR(8)
|
|
|
|
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 25) * 432)
|
|
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
|
|
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 10)
|
|
|
|
#else
|
|
/* No restrictions by OTGFS
|
|
*
|
|
* PLL_VCO = (25,000,000 / 25) * 432 = 432 MHz
|
|
* SYSCLK = 432 MHz / 2 = 216 MHz
|
|
* USB OTG FS, SDMMC and RNG Clock = 432 MHz / 10 = 43.2 MHz
|
|
* DSI CLK = PLL_VCO / PLLR = 432 / 8 = 54 MHz
|
|
*/
|
|
|
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(25)
|
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(432)
|
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(10)
|
|
#define STM32_PLLCFG_PLLR RCC_PLLCFG_PLLR(8)
|
|
|
|
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 25) * 432)
|
|
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
|
|
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 10)
|
|
#endif
|
|
|
|
/* Configure factors for PLLSAI clock */
|
|
|
|
#define STM32_RCC_PLLSAICFGR_PLLSAIN RCC_PLLSAICFGR_PLLSAIN(192)
|
|
#define STM32_RCC_PLLSAICFGR_PLLSAIP RCC_PLLSAICFGR_PLLSAIP(2)
|
|
#define STM32_RCC_PLLSAICFGR_PLLSAIQ RCC_PLLSAICFGR_PLLSAIQ(2)
|
|
#define STM32_RCC_PLLSAICFGR_PLLSAIR RCC_PLLSAICFGR_PLLSAIR(2)
|
|
|
|
/* Configure Dedicated Clock Configuration Register */
|
|
|
|
#define STM32_RCC_DCKCFGR1_PLLI2SDIVQ RCC_DCKCFGR1_PLLI2SDIVQ(1)
|
|
#define STM32_RCC_DCKCFGR1_PLLSAIDIVQ RCC_DCKCFGR1_PLLSAIDIVQ(1)
|
|
#define STM32_RCC_DCKCFGR1_PLLSAIDIVR RCC_DCKCFGR1_PLLSAIDIVR(0)
|
|
#define STM32_RCC_DCKCFGR1_SAI1SRC RCC_DCKCFGR1_SAI1SEL(0)
|
|
#define STM32_RCC_DCKCFGR1_SAI2SRC RCC_DCKCFGR1_SAI2SEL(0)
|
|
#define STM32_RCC_DCKCFGR1_TIMPRESRC 0
|
|
#define STM32_RCC_DCKCFGR1_DFSDM1SRC 0
|
|
#define STM32_RCC_DCKCFGR1_ADFSDM1SRC 0
|
|
|
|
|
|
|
|
/* Configure factors for PLLI2S clock */
|
|
|
|
#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
|
|
#define STM32_RCC_PLLI2SCFGR_PLLI2SP RCC_PLLI2SCFGR_PLLI2SP(2)
|
|
#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
|
|
#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
|
|
|
|
/* Configure Dedicated Clock Configuration Register 2 */
|
|
|
|
#define STM32_RCC_DCKCFGR2_USART1SRC RCC_DCKCFGR2_USART1SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_USART2SRC RCC_DCKCFGR2_USART2SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_UART4SRC RCC_DCKCFGR2_UART4SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_UART5SRC RCC_DCKCFGR2_UART5SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_USART6SRC RCC_DCKCFGR2_USART6SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_UART7SRC RCC_DCKCFGR2_UART7SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_UART8SRC RCC_DCKCFGR2_UART8SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_I2C1SRC RCC_DCKCFGR2_I2C1SEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_I2C2SRC RCC_DCKCFGR2_I2C2SEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_I2C3SRC RCC_DCKCFGR2_I2C3SEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_I2C4SRC RCC_DCKCFGR2_I2C4SEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_LPTIM1SRC RCC_DCKCFGR2_LPTIM1SEL_APB
|
|
#define STM32_RCC_DCKCFGR2_CECSRC RCC_DCKCFGR2_CECSEL_HSI
|
|
#define STM32_RCC_DCKCFGR2_CK48MSRC RCC_DCKCFGR2_CK48MSEL_PLLSAI
|
|
#define STM32_RCC_DCKCFGR2_SDMMCSRC RCC_DCKCFGR2_SDMMCSEL_48MHZ
|
|
#define STM32_RCC_DCKCFGR2_SDMMC2SRC RCC_DCKCFGR2_SDMMC2SEL_48MHZ
|
|
#define STM32_RCC_DCKCFGR2_DSISRC RCC_DCKCFGR2_DSISEL_PHY
|
|
|
|
/* Several prescalers allow the configuration of the two AHB buses, the
|
|
* high-speed APB (APB2) and the low-speed APB (APB1) domains. The maximum
|
|
* frequency of the two AHB buses is 216 MHz while the maximum frequency of
|
|
* the high-speed APB domains is 108 MHz. The maximum allowed frequency of
|
|
* the low-speed APB domain is 54 MHz.
|
|
*/
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (216 MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/4 (54 MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
|
|
|
/* Timers driven from APB1 will be twice PCLK1 */
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
/* APB2 clock (PCLK2) is HCLK/2 (108MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
|
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* Timers driven from APB2 will be twice PCLK2 */
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
/* FLASH wait states
|
|
*
|
|
* --------- ---------- -----------
|
|
* VDD MAX SYSCLK WAIT STATES
|
|
* --------- ---------- -----------
|
|
* 1.7-2.1 V 180 MHz 8
|
|
* 2.1-2.4 V 216 MHz 9
|
|
* 2.4-2.7 V 216 MHz 8
|
|
* 2.7-3.6 V 216 MHz 7
|
|
* --------- ---------- -----------
|
|
*/
|
|
|
|
#define BOARD_FLASH_WAITSTATES 7
|
|
|
|
/* LED definitions ******************************************************************/
|
|
/* The STM32F769I-DISCO board has numerous LEDs but only one, LD1 located near the
|
|
* reset button, that can be controlled by software (LD2 is a power indicator, LD3-6
|
|
* indicate USB status, LD7 is controlled by the ST-Link).
|
|
*
|
|
* LD1 is controlled by PI1 which is also the SPI2_SCK at the Arduino interface.
|
|
* One end of LD1 is grounded so a high output on PI1 will illuminate the LED.
|
|
*
|
|
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
|
|
* The following definitions are used to access individual LEDs.
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0
|
|
#define BOARD_NLEDS 1
|
|
|
|
#define BOARD_LD1 BOARD_LED1
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
|
|
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
|
|
* include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
|
|
* events as follows:
|
|
*
|
|
* SYMBOL Meaning LD1
|
|
* ------------------- ----------------------- ------
|
|
* LED_STARTED NuttX has been started OFF
|
|
* LED_HEAPALLOCATE Heap has been allocated OFF
|
|
* LED_IRQSENABLED Interrupts enabled OFF
|
|
* LED_STACKCREATED Idle stack created ON
|
|
* LED_INIRQ In an interrupt N/C
|
|
* LED_SIGNAL In a signal handler N/C
|
|
* LED_ASSERTION An assertion failed N/C
|
|
* LED_PANIC The system has crashed FLASH
|
|
*
|
|
* Thus is LD1 is statically on, NuttX has successfully booted and is,
|
|
* apparently, running normally. If LD1 is flashing at approximately
|
|
* 2Hz, then a fatal error has been detected and the system has halted.
|
|
*/
|
|
|
|
#define LED_STARTED 0 /* LD1=OFF */
|
|
#define LED_HEAPALLOCATE 0 /* LD1=OFF */
|
|
#define LED_IRQSENABLED 0 /* LD1=OFF */
|
|
#define LED_STACKCREATED 1 /* LD1=ON */
|
|
#define LED_INIRQ 2 /* LD1=no change */
|
|
#define LED_SIGNAL 2 /* LD1=no change */
|
|
#define LED_ASSERTION 2 /* LD1=no change */
|
|
#define LED_PANIC 3 /* LD1=flashing */
|
|
|
|
/* Button definitions ***************************************************************/
|
|
/* The STM32F7 Discovery supports one button: Pushbutton B1, labelled "User", is
|
|
* connected to GPIO PA0. A high value will be sensed when the button is depressed.
|
|
*/
|
|
|
|
#define BUTTON_USER 0
|
|
#define NUM_BUTTONS 1
|
|
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
|
|
|
/* Alternate function pin selections ************************************************/
|
|
|
|
/* USART6:
|
|
*
|
|
* These configurations assume that you are using a standard Arduio RS-232 shield
|
|
* with the serial interface with RX on pin D0 and TX on pin D1:
|
|
*
|
|
* -------- ---------------
|
|
* STM32F7
|
|
* ARDUINO FUNCTION GPIO
|
|
* -- ----- --------- -----
|
|
* DO RX USART6_RX PC7
|
|
* D1 TX USART6_TX PC6
|
|
* -- ----- --------- -----
|
|
*/
|
|
|
|
#define GPIO_USART6_RX GPIO_USART6_RX_1
|
|
#define GPIO_USART6_TX GPIO_USART6_TX_1
|
|
|
|
/* USART1:
|
|
* USART1 is connected to the "Virtual Com Port" lines
|
|
* of the ST-LINK controller.
|
|
*
|
|
* -------- ---------------
|
|
* STM32F7
|
|
* SIGNAME FUNCTION GPIO
|
|
* -- ----- --------- -----
|
|
* VCP_RX USART1_RX PA10
|
|
* VCP_TX USART1_TX PA9
|
|
* -- ----- --------- -----
|
|
*/
|
|
|
|
#define GPIO_USART1_RX GPIO_USART1_RX_1
|
|
#define GPIO_USART1_TX GPIO_USART1_TX_1
|
|
|
|
/* The STM32 F7 connects to a SMSC LAN8742A PHY using these pins:
|
|
*
|
|
* STM32 F7 BOARD LAN8742A
|
|
* GPIO SIGNAL PIN NAME
|
|
* -------- ------------ -------------
|
|
* PG11 RMII_TX_EN TXEN
|
|
* PG13 RMII_TXD0 TXD0
|
|
* PG14 RMII_TXD1 TXD1
|
|
* PC4 RMII_RXD0 RXD0/MODE0
|
|
* PC5 RMII_RXD1 RXD1/MODE1
|
|
* PD5 RMII_RXER RXER/PHYAD0
|
|
* PA7 RMII_CRS_DV CRS_DV/MODE2
|
|
* PC1 RMII_MDC MDC
|
|
* PA2 RMII_MDIO MDIO
|
|
* N/A NRST nRST
|
|
* PA1 RMII_REF_CLK nINT/REFCLK0
|
|
* N/A OSC_25M XTAL1/CLKIN
|
|
*
|
|
* The PHY address is 0, since RMII_RXER/PHYAD0 features a pull down.
|
|
* After reset, RMII_RXER/PHYAD0 switches to the RXER function,
|
|
* receive errors can be detected using GPIO pin PD5
|
|
*/
|
|
|
|
#define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_2
|
|
#define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2
|
|
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2
|
|
|
|
/* I2C Mapping
|
|
* I2C #4 is connected to the LCD daughter board
|
|
* and the WM8994 audio codec.
|
|
*
|
|
* I2C4_SCL - PD12
|
|
* I2C4_SDA - PB7
|
|
*/
|
|
#define GPIO_I2C4_SCL GPIO_I2C4_SCL_1
|
|
#define GPIO_I2C4_SDA GPIO_I2C4_SDA_5
|
|
|
|
/* SDMMC */
|
|
|
|
/* Stream selections are arbitrary for now but might become important in the future
|
|
* if we set aside more DMA channels/streams.
|
|
*
|
|
* SDIO DMA
|
|
* DMAMAP_SDMMC1_1 = Channel 4, Stream 3
|
|
* DMAMAP_SDMMC1_2 = Channel 4, Stream 6
|
|
*
|
|
* DMAMAP_SDMMC2_1 = Channel 11, Stream 0
|
|
* DMAMAP_SDMMC2_2 = Channel 11, Stream 5
|
|
*/
|
|
|
|
// #define DMAMAP_SDMMC1 DMAMAP_SDMMC1_1
|
|
#define DMAMAP_SDMMC2 DMAMAP_SDMMC2_1
|
|
|
|
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
|
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
|
* to service FIFOs in interrupt driven mode. These values have not been
|
|
* tuned!!!
|
|
*
|
|
* SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
|
|
*/
|
|
|
|
#define STM32_SDMMC_INIT_CLKDIV (118 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
|
|
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
|
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
|
|
*/
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
# define STM32_SDMMC_MMCXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
|
#else
|
|
# define STM32_SDMMC_MMCXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
|
#endif
|
|
|
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
|
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
|
|
*/
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
# define STM32_SDMMC_SDXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
|
#else
|
|
# define STM32_SDMMC_SDXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
|
|
#endif
|
|
|
|
/* SDMMC2 Pin mapping
|
|
*
|
|
* D0 - PG9
|
|
* D1 - PG10
|
|
* D2 - PB3
|
|
* D3 - PB4
|
|
*/
|
|
#define GPIO_SDMMC2_D0 GPIO_SDMMC2_D0_2
|
|
#define GPIO_SDMMC2_D1 GPIO_SDMMC2_D1_2
|
|
#define GPIO_SDMMC2_D2 GPIO_SDMMC2_D2_1
|
|
#define GPIO_SDMMC2_D3 GPIO_SDMMC2_D3_1
|
|
|
|
/* LCD DISPLAY
|
|
* (work in progress as of 2017 07 19)
|
|
*/
|
|
#define BOARD_LTDC_WIDTH 800
|
|
#define BOARD_LTDC_HEIGHT 472
|
|
|
|
#define BOARD_LTDC_HSYNC 10
|
|
#define BOARD_LTDC_HFP 10
|
|
#define BOARD_LTDC_HBP 20
|
|
#define BOARD_LTDC_VSYNC 2
|
|
#define BOARD_LTDC_VFP 4
|
|
#define BOARD_LTDC_VBP 2
|
|
|
|
#define BOARD_LTDC_GCR_PCPOL 0
|
|
#define BOARD_LTDC_GCR_DEPOL 0
|
|
#define BOARD_LTDC_GCR_VSPOL 0
|
|
#define BOARD_LTDC_GCR_HSPOL 0
|
|
|
|
#endif /* __CONFIG_STM32F769I_DISCO_INCLUDE_BOARD_H */
|